GB/T 5626.2-1985 Flared tapered thread straight pipe fitting body
time:
2024-08-04 15:12:06
- GB/T 5626.2-1985
- Abolished
Standard ID:
GB/T 5626.2-1985
Standard Name:
Flared tapered thread straight pipe fitting body
Chinese Name:
扩口式锥螺纹直通管接头体
Standard category:
National Standard (GB)
-
Date of Release:
1985-01-01 -
Date of Implementation:
1986-09-01 -
Date of Expiration:
2008-11-01
Standard ICS number:
Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting partsChina Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
Replaced by GB/T 5626-2008
Release date:
1985-11-25Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Pipe AccessoriesPublishing Department:
China Machinery Industry FederationCompetent Authority:
China Machinery Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
GB/T 5626.2-1985 Flared tapered thread straight pipe fitting body GB/T5626.2-1985 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
National Standard of the People's Republic of China
Flared type tube fittings-
Male connector- Body
This standard applies to taper type tube fittings for pipeline systems with oil and gas as the medium. Marking example:
Type A flared chain-burst pipe fitting with an outer diameter D of 10 mm: Fitting body A10GB5626.2—85
National Bureau of Standards 1985-11-25 Issued
UDC 621.643.4
GB 5626.2—85
1986-0901 Implementation
Outer diameter
M12×1.510
M11×1.511.7
MiG ×1.5
GB5626.2—85bZxz.net
12.51.528.5
M18 × 1.515.7|11
M22 ×1.519.7|13
M24 × 1.521.7/15
M27 x1.5|2:.716.520.5
M30×2
/M33×2
M36×2
M39×2
M12 ×2
M45×2
7.510.515
Technical conditions are in accordance with GB5653-85 "Technical conditions for flared pipe joints". Additional notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and approved by the Standardization Research Institute of the Ministry of Machinery Industry. 74-1.5
Mass (steel>
kg/100 pieces*
This standard was drafted by the Ministry of Machinery Industry, Shanghai Pressurized Accessories, Shanghai Automobile Research Institute, and Shanghai Hydraulic Excitation Research Institute. The main drafters of this standard are Hu Bi Niu, Li Ningyu, and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Flared type tube fittings-
Male connector- Body
This standard applies to taper type tube fittings for pipeline systems with oil and gas as the medium. Marking example:
Type A flared chain-burst pipe fitting with an outer diameter D of 10 mm: Fitting body A10GB5626.2—85
National Bureau of Standards 1985-11-25 Issued
UDC 621.643.4
GB 5626.2—85
1986-0901 Implementation
Outer diameter
M12×1.510
M11×1.511.7
MiG ×1.5
GB5626.2—85bZxz.net
12.51.528.5
M18 × 1.515.7|11
M22 ×1.519.7|13
M24 × 1.521.7/15
M27 x1.5|2:.716.520.5
M30×2
/M33×2
M36×2
M39×2
M12 ×2
M45×2
7.510.515
Technical conditions are in accordance with GB5653-85 "Technical conditions for flared pipe joints". Additional notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and approved by the Standardization Research Institute of the Ministry of Machinery Industry. 74-1.5
Mass (steel>
kg/100 pieces*
This standard was drafted by the Ministry of Machinery Industry, Shanghai Pressurized Accessories, Shanghai Automobile Research Institute, and Shanghai Hydraulic Excitation Research Institute. The main drafters of this standard are Hu Bi Niu, Li Ningyu, and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 8772.7-1998 Inspection conditions for precision machining centers Part 7: Accuracy inspection of precision machined test pieces
- GB/T 16901.1-1997 Rules for the presentation of graphical symbols--Graphical symbols for use in technical documentation of product--Part1:Basic rules
- CB/T 3254.1-1994 Standard environmental conditions for bench testing of marine diesel engines and verification of power, fuel consumption and oil consumption
- SC/T 2002-2002 Prawn compound feed
- GB 16323-1996 Maximum residue limits of atrazine in food
- SJ 20624-1997 General specification for military shelter lifting mechanism
- GB/T 9214-1988 Carbide conical round head rotary files
- FZ/T 43017-2003 Silk/Spandex stretch silk fabric
- JB/T 9141.7-1999 Determination method of thermal weight loss of flexible graphite sheet
- JB/T 8622-1997 Technical conditions and graduation table of industrial platinum thermal resistors
- JB/T 8872-2002 Technical requirements for carbon graphite sealing rings for mechanical seals
- JB/T 7002-1993 WGC type vertically mounted drum gear coupling type, parameters and dimensions
- SY/T 5218-1991 Basic environmental test methods for petroleum exploration and development instruments Test A: High temperature test
- JB/T 7414.1-1999 Vertical stereo copy milling machine accuracy inspection
- QB/T 2727-2005 Leather color fastness test Color fastness to light: Xenon arc
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com