QB 1774-1993 Butyl butyrate

QB 1774-1993 Butyl Butyrate QB1774-1993 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB1769~-1801-93
Fragrance Standard
(Product Standard)
Issued on 1993-04-29
Implemented on 1993-12-01
Issued by the Ministry of Light Industry of the People's Republic of China
Production Content and Applicable ScopeWww.bzxZ.net
uiKAoNiKAca
Industry Standard of the People's Republic of China
OB 177493
Butyl butyrate
This standard specifies the technical requirements, test methods and inspection rules for monobutyl butyrate. This standard applies to butyric acid ore obtained by chemical synthesis using n-butyric acid and n-butyl as raw materials. 2 Reference standards GB/T14454.3 Determination of color of spices CB/T14454.2 Determination of the relative density of isolated and synthetic spices GB11540 Determination of the relative density of isolated and synthetic spices GD/T11434.4 Determination of the refractive index of spices GB/T14437.1 Determination of the minimum solubility of isolated and synthetic spices in ethanol CB/T14467.2 Determination of boiling point of isolated and synthetic spices CB/T14457-4 Determination of the acid value or content of isolated and synthetic spices GR/T 11457:5 Determination of ester content in isolated and synthetic fragrances GB11539 Isolated and synthetic fragrances Gas chromatograph analysis method with packed column
3 Product name, molecular weight, structural formula, molecular weight Chemical name Butyrate
Molecular formula C.1,0
Structural formula CCIICOOCCCH,C
Molecular weight 144.21 (187 atomic weight) 1 Technical requirements
4.1 Appearance Colorless light blue, color not exceeding standard color standard No. 4, 4.2 Aroma fruity with a hint of tactile.
43 Concentration (25/25) 0.867~71.
44 Refractive index (20) 1.4301~1.46
4.5 Solubility (25) 1ml test gold reduction 70% (V/V ethanol 3ml 4.6 (162~170) () 25, center.
4.7 Low acid if
4.8 Fat content (%) 298.0 yuan
5 Trial method
Ministry of Light Industry of the People's Republic of China approved on April 29, 1993 24 -
1993—12—01 implementation
5-1 Color determination
RGB/T14454.$-
5.2 Determination of seasonal changes
See CB/T14454.2,
5.3 Determination of relative density, 2%/25T:
See CB11546
5.1 Determination of new light coefficient, to the node
See GB/T14454.4,
5.5 Determination of solubility, 25%
See GB/T 14467.1,
5.6 Determination of acid value
CR/T13457.2.
5.7 Determination of acid value
See B/T1&4bY+4.
5.8 Determination of enzyme content
See GB/T14457.5
E Inspection rules
QB1774-83
6,1 Each batch of finished butyric acid products shall be inspected by the inspection department of the manufacturer. The manufacturer shall ensure that the products meet the requirements of this clause. Requirements. Each batch of products leaving the factory shall be accompanied by a quality certificate, which shall include the manufacturer name, product name, trademark, production date or batch number. The net weight, product quality and the certification number required shall meet the standards set out in this standard. 6.2 The acceptance unit has the right to confirm whether the products received meet the requirements of the standard according to the provisions of this standard. Each batch number shall be inspected once: different batch numbers shall be inspected separately. 0.3 For each batch, 200 barrels (bottles) or less shall be drawn, and 100 boxes (bottles) or less shall be drawn. When sampling outside the store, external inspection shall be carried out. There should be no small changes and heavy, and then the air should be fully vibrated. Then use the modified tube to absorb 10D-200nl of the sample, mix it evenly with the mixing spoon, and put it into two streams. In the frosted glass, indicate on the bottle: manufacturer name, product name, batch number, number and receipt date, one bottle for inspection, and one bottle for future reference.
64 If one of the indicators does not meet the requirements of this standard, you can refer to the manufacturer to add a new final resistance test. If the re-test results still have unqualified indicators, then the batch The product cannot be accepted. 6.5 When the supplier or demander has objections to the product quality, the two parties may work together to resolve the issue or invite the inspection team to conduct a type inspection, and the two parties shall bear the cost.
6. Color, aroma, acid value and phenol content are the inspection indicators. Density, refractive index and solution shall be the inspection indicators, and the inspection shall be changed every hour.
7 Marking, packaging, transportation and storage
7.1 The butyric acid factory shall put the butyric acid brand in the bottle or insert the butyric acid brand, and the packaging shall be marked with the product name, production, trademark, batch number, weight, quantity, standard reduction and related packaging marks. 1. The unit storage requirements of the goods shall be agreed with the qualified manufacturer; otherwise, the standard shall be agreed with the qualified manufacturer.
OB77493
iiKAoNiiKAca
7.2 During transportation, it should be protected from exposure to sunlight, rain and air pollution. It is strictly forbidden to mix with alcohol, alkali, etc. 7.3 The product should be stored in a well-ventilated and well-ventilated warehouse to prevent foreign air pollution and keep away from fire. 7.4 Under the specified transportation conditions, complete packaging and unopened, the shelf life of this product is - years. 26
A1 Instrument
QR 1174-93
Recorder
Determination of Butyraldehyde Butyl Ester Content Gas Chromatography Internal Normalization Method (Examination)
A1.1 The colorimeter, recorder and microprocessor shall be as specified in GE11539, length, inner diameter ~.
PEC2n, %-10% was added to Chroma3orhAWDMc9G-a0: A1.3 Detector
Ammonia condensation detector,
A2 Operating conditions
A2.1 Temperature
Chroma3 furnace temperature rises from 70℃ to 180℃, speed value is 1100℃.
Detector 190℃
A22 Channel
Gas flow rate, 25ml/min.
A3 Performance test
A3.1 Chemical properties test
The test was carried out according to the method specified in item 1 of H11538, and it met the requirements. A3.2 Efficacy
The determination method is specified in Article 8.2 of B11539. A4 Determination method
Internal normalization method, according to Article 1U.1 of CB1152S1. A5 Blackness and structure expression
According to Article 11.4 of QB 13539: it should meet the requirements, additional instructions:
QB 177493
This standard is issued by the Ministry of Light Industry. This standard is under the jurisdiction of the National Flavor and Fragrance Chemical Center. This standard is also jointly sponsored by Tianshen City Flavor and Fragrance Factory. The main drafter of the standard: Lian Xueduan.
-TKAONrKAca-
This standard adopts the US FCC () standard No. 3 "butyl butyl ester". From the date of implementation of this standard, all light industry standards QB-8 are used as 28 -
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.