JB/T 2001.47-1999 Airlock valve core for water system pump station (PN=20, 31.5MPa)
time:
2024-08-11 18:42:02
- JB/T 2001.47-1999
- in force
Standard ID:
JB/T 2001.47-1999
Standard Name:
Airlock valve core for water system pump station (PN=20, 31.5MPa)
Chinese Name:
水系统 泵站用气闸阀芯(PN=20、31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2050-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee
Skip to download
Summary:
JB/T 2001.47-1999 JB/T 2001.47-1999 Airlock valve core for water system pump station (PN=20, 31.5MPa) JB/T2001.47-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 IssuedbzxZ.net
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water System
Air Gate Valve Core for Pump Station
Water sysleru Core of gfs shut off vahveforwateraccumulator
(PN=20, 31.5MPa]
The standard specifies the type, size and requirements of the air gate core of the pump station, IH-T 2001.47—1999
Find Fee 32050-84
Standard application standard pressure is 20, 31.5MPa, and is used to control the air master core of the high-pressure air pipeline in the pump station of the actuator.
2 Type and size
2.1V1n, D25mm. The steps and dimensions of the air lock valve core are in accordance with the provisions of Figure 1 and 1: [Alarm rod: 2 Pressure flow: 3 Pressure change: 4 V-shaped seal: 5-Support ring: 6 Seal; 7-Pad: 8-Two seats: 9-Tao: 100-shaped seal ring Figure 1
National Machinery Industry Bureau approved 2Hchuan-Small 1-{] implementation on June 28, 1999
J37T 21m1.47
JB-T 200I.47.2
JB/T 2001.47—999
1.2DN40, DN65mm core type and size according to Figure 2, Table 2. 1- Rod: 2- Small dry whole: 3- Jade check: 4- Use cumulative dry separation, 5- V-throat sealing rate: 6- Support damage: 7- Out of sealing rate, difference
SO-shaped density: - Cup: 1G- Account needle: 11- Screw: 12- Pressure space: 13- Valve: 14- Seat: 150- Shape time network cabinet 2
R/2K1147
JB-T2001.47.4
3 Technical requirements
JET 2001.47—1999
3.1 Nominal pressure 31.5MPu, test pressure 42MPa. 20MPa below the nominal pressure, test pressure 30MP
3.2 During the test, the pressure drop phenomenon of the steel mouth is not very leaky, and the stroke
3.3TIN0, DN6Smm air valve core, in the closed state, the lower chamber pressure is not allowed to be full. 4 Marking example
Nominal light air core:
Air brake valve core DNidJB.T2001.47--1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 IssuedbzxZ.net
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water System
Air Gate Valve Core for Pump Station
Water sysleru Core of gfs shut off vahveforwateraccumulator
(PN=20, 31.5MPa]
The standard specifies the type, size and requirements of the air gate core of the pump station, IH-T 2001.47—1999
Find Fee 32050-84
Standard application standard pressure is 20, 31.5MPa, and is used to control the air master core of the high-pressure air pipeline in the pump station of the actuator.
2 Type and size
2.1V1n, D25mm. The steps and dimensions of the air lock valve core are in accordance with the provisions of Figure 1 and 1: [Alarm rod: 2 Pressure flow: 3 Pressure change: 4 V-shaped seal: 5-Support ring: 6 Seal; 7-Pad: 8-Two seats: 9-Tao: 100-shaped seal ring Figure 1
National Machinery Industry Bureau approved 2Hchuan-Small 1-{] implementation on June 28, 1999
J37T 21m1.47
JB-T 200I.47.2
JB/T 2001.47—999
1.2DN40, DN65mm core type and size according to Figure 2, Table 2. 1- Rod: 2- Small dry whole: 3- Jade check: 4- Use cumulative dry separation, 5- V-throat sealing rate: 6- Support damage: 7- Out of sealing rate, difference
SO-shaped density: - Cup: 1G- Account needle: 11- Screw: 12- Pressure space: 13- Valve: 14- Seat: 150- Shape time network cabinet 2
R/2K1147
JB-T2001.47.4
3 Technical requirements
JET 2001.47—1999
3.1 Nominal pressure 31.5MPu, test pressure 42MPa. 20MPa below the nominal pressure, test pressure 30MP
3.2 During the test, the pressure drop phenomenon of the steel mouth is not very leaky, and the stroke
3.3TIN0, DN6Smm air valve core, in the closed state, the lower chamber pressure is not allowed to be full. 4 Marking example
Nominal light air core:
Air brake valve core DNidJB.T2001.47--1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 3267-1991 Brake shoes for narrow gauge industrial and mining electric locomotives
- JB/T 82.4-1994 Ring connection face welding steel pipe flange
- GB/T 2900.15-1997 Electrical terminology transformers, mutual inductors, voltage regulators and reactors
- JB/T 8917-1999 Roller Press
- JB/T 8494-1996 Technical requirements for hydraulic presses for metal baling
- JB/T 5992.1-1992 General principles for classification and coding of mechanical manufacturing process methods
- JB/T 9200-1999 Flame quenching and tempering treatment of steel parts
- HG 3023-1989 Photographic grade sodium thiosulfate
- NY/T 607-2002 Technical regulations for rubber tree breeding
- HG/T 2353.1-1992 Method for determination of filtration accuracy of filter elements for magnetic slurry filtration
- JB/T 8430-1996 Method for compiling industrial robot models
- JB/T 8352-1996 Technical requirements for rotary level sensors
- JB/T 2231.3-1999 Reciprocating piston compressor parts Part 3: Thin-walled bearings
- JB/T 5000.3-1998 General technical conditions for welding parts of heavy machinery
- JB/T 10356-2002 Technical requirements for fluidized bed combustion equipment
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com