
JB/T 2001.51-1999 Columnar accumulator gas tank for water system pump station (PN=31.5MPa)
time:
2024-08-11 18:39:16
- JB/T 2001.51-1999
- in force
Standard ID:
JB/T 2001.51-1999
Standard Name:
Columnar accumulator gas tank for water system pump station (PN=31.5MPa)
Chinese Name:
水系统 泵站用柱形蓄势器气罐(PN=31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2054-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee

Skip to download
Summary:
JB/T 2001.51-1999 JB/T 2001.51-1999 Columnar accumulator gas tank for water system pump station (PN=31.5MPa) JB/T2001.51-1999 Standard download decompression password: www.bzxz.net

Some standard content:
IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
One Scope
Standard of the Machinery Industry of the People's Republic of China
Cylinder type accumulator gas cylinder for pump station
Water system year
watcrsystemGascylindricalaccunulator(PN=31.5 MPa)
This standard specifies the type, size and technical requirements of the gas end of the rod-shaped holderJBrT2001.51-1999
24054—84
The six standards apply to the following nominal force 35M, air as the medium of the station with the shape of the gas device 2 or with the size
2.A type: the type and size of the high support gas section shall be in accordance with the provisions of Table 1, and the benzene-resistant channel shall be opened to a width of 12Umrml. Under the condition of the degree of damage, the channel can be designed to be continuous, so as to see and widen the maintenance space. 2.21 type; the type and size of the low support gas transmission device shall be in accordance with the provisions of Table 2, and the system tank area shall be all 2.3A and B type gas connection external connection center size Figure 3: 3 Technical requirementsbzxZ.net
3, except for the specially designed pads, no other connection shall be allowed: 3.2 Due to the difference in the material and the material of the Beijing network, different manufacturers, the strength is guaranteed 31.5MP safe working 4 marking example
High support A type shape gas tank:
Shape gas tank 1A) 4JB/T2001.5]-1999 National Machinery Industry Standard 1999-(M-2 etc. approved 2000-01-01 implementation
Support type research
Figure A plastic
Main material science
13MrNiMoNh
Nominal product
[8/T20051-1999
Figure 2E type
13M:kiMokb
International inspection table
8/T200151-1999
Second work accuracy
Located in the city stomach point use · several
4 2200
, gas external connection gauge
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
One Scope
Standard of the Machinery Industry of the People's Republic of China
Cylinder type accumulator gas cylinder for pump station
Water system year
watcrsystemGascylindricalaccunulator(PN=31.5 MPa)
This standard specifies the type, size and technical requirements of the gas end of the rod-shaped holderJBrT2001.51-1999
24054—84
The six standards apply to the following nominal force 35M, air as the medium of the station with the shape of the gas device 2 or with the size
2.A type: the type and size of the high support gas section shall be in accordance with the provisions of Table 1, and the benzene-resistant channel shall be opened to a width of 12Umrml. Under the condition of the degree of damage, the channel can be designed to be continuous, so as to see and widen the maintenance space. 2.21 type; the type and size of the low support gas transmission device shall be in accordance with the provisions of Table 2, and the system tank area shall be all 2.3A and B type gas connection external connection center size Figure 3: 3 Technical requirementsbzxZ.net
3, except for the specially designed pads, no other connection shall be allowed: 3.2 Due to the difference in the material and the material of the Beijing network, different manufacturers, the strength is guaranteed 31.5MP safe working 4 marking example
High support A type shape gas tank:
Shape gas tank 1A) 4JB/T2001.5]-1999 National Machinery Industry Standard 1999-(M-2 etc. approved 2000-01-01 implementation
Support type research
Figure A plastic
Main material science
13MrNiMoNh
Nominal product
[8/T20051-1999
Figure 2E type
13M:kiMokb
International inspection table
8/T200151-1999
Second work accuracy
Located in the city stomach point use · several
4 2200
, gas external connection gauge
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB 10173-2000 On-site mixed explosives truck mobile ground auxiliary facilities
- JB/T 7282-2004 Selection of types and specifications of tractor oil
- JB 9970-1999 Noise limits for punching and shearing machines and combined punching and shearing machines
- SJ 20642-1997 General specification for semiconductor photovoltaic modules
- JB/T 8412-1996 Air shovel
- GB 18180-2000 Safe operation requirements for liquefied gas vessels
- JB/T 9773.2-1999 Diesel engine starting performance test method
- HG/T 20704.1-2000 Scope of responsibilities of pump professionals and tasks at each stage of design
- GB/T 15667-1995 Determination of chloride content in fruits, vegetables and their products
- JB/T 7029-1993 Technical requirements for non-magnetic retaining ring forgings for steam turbine generators below 50MW
- GB 17325-1998 Hygienic standard for concentrated fruit and vegetable juice (pulp) for use in the food industry
- MT/T 659-1997 GXS fine particle grading screen
- GB 12971.3-1991 Contact wire for electric traction Part 3: Steel and aluminum composite contact wire
- GB/T 33866-2017 Measurement for solar ultraviolet radiation—Broadband ultraviolet radiometer method
- SJ/T 1146-1993 Test methods for bulk resistivity of organic film for use in capacitors
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com