GB/T 5008.3-2005 Dimensions and markings of lead-acid starting battery terminals

GB/T 5008 This part specifies the dimensions and markings of the positive and negative terminals of lead-acid batteries for starting. This part applies to vented (liquid-flooded) lead-acid batteries and valve-controlled (gas-recombined) batteries with a rated voltage of 12V for starting, ignition and lighting of various automobiles, tractors and other internal combustion engines. This part does not apply to batteries used for other purposes, such as starting batteries for railway diesel locomotives. GB/T 5008.3-2005 Dimensions and markings of lead-acid battery terminals for starting GB/T5008.3-2005 Standard download decompression password: www.bzxz.net

1C8 29. 220. 20
National Standard of the People's Republic of China
GB/T5008.3—2005
Guangsa 6R/(F31991
Leidatid slarler balleries-[imension and marking of terminals lerminals2005-01-18 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
2005-08-01 Implementation
GB/T5008.3—2005
1 Specification
Before the end of the size
, the marking
GB/T5:1:16 Starting lead-acid battery specifications 2\three parts; Part 1: Smoke starter battery core plan! Part 2, starter acid replacement battery
Part 3: Starting
Product variety and specifications;
Terminal size, and marking! :
This part is the first part of G/T5008
Part G/5008-1391 has the following main changes:
This part replaces G0.3-191 with the actual quantity.
This part is drafted by the State-owned Battery Standardization Technical Committee 7, which was issued by the Yangdi Battery Research Institute.
This part replaces the standard issued by the Ministry of Industry and Information Technology: GR/T 5008.--.US5, H/T 008.3-[S1 GB/T 5008.3—2005
1 Scope
Starting lead-acid batteries
Terminal dimensions and marking
GTT5008 specifies the dimensions and markings of the negative terminal of starting lead-acid batteries, GA/T 5C03.3—200E
This standard specifies the dimensions and markings of the negative terminal of starting lead-acid batteries, GA/T 5C03.3—200E
This standard specifies the exhaust (liquid-rich) type micro-batteries (hereinafter referred to as two-cell batteries) and gas-fired (gas-fired) type series batteries for starting and ignition of various automobiles, engines and motors with a rated voltage of 1?V. This standard does not apply to the dimensions of the lead-acid starting terminals of railway diesel locomotives, such as the dimensions of the conical terminals as shown in Table 1 and Table 1.
Classification
2.2 Angular terminal size as shown in Figure 2
2.3 If there are special requirements, please consult with the manufacturer. mibZxz.net
GB/T5008.3—2C05
3 Terminal marking
3.1 Terminal marking as shown in Figure 3:
3.2 Negative terminal marking as shown in Figure 1
3.3 Terminal marking as shown in the battery or the battery mark.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.