JB/T 8036.2-1999 Adjustable supports for machine tool fixture parts and components

JB/T 8036.2-1999 This standard specifies adjustable supports with an adjustment height of 25~145mm. This standard was first issued in 1983 as JB 3407-83 and first revised in 1991 as GB/T 12877-91. JB/T 8036.2-1999 Adjustable supports for machine tool fixture parts and components JB/T8036.2-1999 Standard download decompression password: www.bzxz.net

ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 IssuedwwW.bzxz.Net
State Machinery Industry Bureau
2000-01-01 Implementation
1 Scope
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixtures
Adjustable pedestal
This standard specifies adjustable pedestals with an adjustment height of 25~145mm. 2 Dimensions
The dimensions are shown in the following figure and table.
Adjust the height H
3 Marking
3.1 Marking example:
Adjustable support with H=105~125mm:
Support 105~125JB/T8036.2~t999
Approved by the State Machinery Industry Bureau on 1999-08-06A
JB/T8036.2—1999
Implemented on 2000-01-01
See Figure A1 for application examples.
Lower block 122
Lower gasket replacement 82
JB/T 8036.21999
Appendix A
(Suggested appendix)
Application example
Upper block 44
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.