JB/T 2001.25-1999 Water system distribution valve core (PN=20, 31.5MPa)

JB/T 2001.25-1999 This standard is a revision of JB 2025-84 "Type and size of distribution valve core for hydraulic press (Pg=200×100000~315×100000Pa)". This standard specifies the type, size and technical requirements of the distribution valve core. This standard is applicable to distribution valve cores for various hydraulic presses with nominal pressure of 20, 31.5MPa and emulsion or oil as medium. It is not applicable to special fast free forging presses. This standard was first issued on January 1, 1984. JB/T 2001.25-1999 Water system distribution valve core (PN=20, 31.5MPa) JB/T2001.25-1999 standard download decompression password: www.bzxz.net

IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water system
Distributing valve core
Water systean..Core of dlstributing valvt( PN=20, 31.5 MPa J
The standard specifies the types, dimensions and technical requirements of these types. JB/r200125-1599
Transmission 2K4
Or standard use ten centimeters! 30, 31.5MPA: Emulsion or oil as the medium for the liquid distribution machine: not applicable to ten special piece speed self-forging card machine:
2 Type and size
2.1 [The type and size of the core according to the specifications of the system [, table] 2.1 [25-3 type and size according to the provisions of Table 2 2.3 [40-0m type or according to the provisions of Table 3 2.4 N65-[00mm type and size according to Figure 4, Table 4. 2.5 The number of compensation brackets in the diagram is a reference for design: 3 Technical requirements || tt || 3.1 Nominal pressure 31.5MP, test pressure 42MP: Nominal pressure 2UMPu, test pressure 63UMa~3.2 filter below The pressure should be consistent with the filter body, maintain 1min, and there should be no leakage at the valve port. 3.3 The valve should be installed according to the requirements of the outlet: 3.4 The inlet and outlet holes on the moving body are straight holes, which should be determined according to the design needs. 4 Marking example
The nominal air distribution valve with a diameter of 25mm is: Distribution network water inlet. 25 [B2001.25-15595 Distribution valve opening force
Distribution core opening See Appendix A (Appendix of the National Machinery Industry Corporation 1999-06-28 approved 2000-1-01 implementation
JBT2001.25-1999
1: 2-Thanks to the section: 3-Capital: 4.-Learning, 5-Oh change: -Standard: 7-0 shape with drop 1.5
-U-shaped diagram, -lift not, 1-up can: [1-flash: 12-adjust, 13 down cup: 14 and other Figure 1
JI-T 2001.25.1
JBT200125.2
JB/T 2X1.251
JE/T 2301.25 2
J-T8t8
Multiple learning dimensions
M42 ×2
M48 ×2
5-- 15
>25-water inlet
38/F2001,25999
2s-32 row of small Taoyi
1-7 abandoned: 2-adjustment set, 3-single fee: 4 rule each: 5 case: 6 room seat: -0 shape seal - ear music set: 9-front: 16 burning rate: 11 net cup: 12 drink: 12-limit seat: 14-0 shadow week: 15-support ring, 16V-shaped dense state diagram: 17-guide meeting: 18-room diagram
IB/T1001.253
JBv- 2DL.25 4
JB/T 200L.25
J3T2001.25.3
F3/T2001.25.4
F.T2001.25.5
1 1756
and water reduction
water rain core
water moisturizing you
drain valve core
water calculation
chuan water core
water inlet solution
drainage stuffy Zhi
JB/T 3001.25—1999
DN25-32Min
冏2 (finished)
118-28
119/89
M76×3
M481×3
0 329 :
N4-water valve core
J3/T 2001.25—1999
b) 4-50 non-water art
1-forbidden to wear: 2-adjustment set: 3-spring blue, 4-frequency mother, 5-screw testicle, (one comment: 0 shape rate shot: 8-pressure: 9-tree hair: 10-: 1-smoke cup: 12-two: 13-flash seat: 140 shape rare sweeping picture: 15-or ring: shape density limit: 17-pregnancy etc. 14-end etc. 3
JB[200t.25.7
JE.T 2001.25.8
B:T 2001.25.9
JR/T 2(G1.25.7
JB/) 2001.2$.8
IR/T 20KI1.25.9
JT20012S.1G
Xiaoshui core
Drainage plate
Water inlet core
Drainage valve
Shibing valve core
Drainage valve
3T20125-1999
LN0-SU mesh
Same as 3 (Yuan)
3195× 3
Mins×3
）165-00 Taoxin
JR/T201,25-[999
）NGS-water
【One guide sweep: 2-adjustment sleeve: 3-spring placement: 4-account nut: 5 screw diffuse: -out seal seat: 7: heart-shaped south inch agent X-yuan: 9 single guest: 10: 11-two: 12 room: 13-: 14-shape rate time: 15-support. 16-density: 1: etc.: 18-seat Figure 4
JB/T2001,25-199
DN65~100 network brand
Figure 4 (width)
19.T 2G1.25.11
1B:T 2091.25.12
J3[ 2601.25.13
R:1 211
Jinshu reading core
Yingshui Min core
[B 200:25.15[ Jinshui reading core
JO:T 20n1.2:.16
JB:T 2O:1.25.11
J5 2:x:1 25 12
JH/I 20G12513
JMT 2001.25.14
J11-1 200125.15
JR:T 2001.25.16
French network status
Ice and clouds
Water inlet
Drainage cavity you! bZxz.net
Drainage core
JB/T2001.25-1999
160［220
Rage test scale at
M130 ×?
W145 ×3
M:70×3
615 108
AI distribution core opening force
Distribution valve core opening force according to the table:
Distribution filling heart wine waiting T2N
Control teacher dynamic
Advanced technology network
Escape valve
Drainage agent
20 MPa
20 MPa
JB/T1001.2S—1999
Appendix A
Appendix
Design reference data
！ ！ The actual lower force can be measured to be 12.64
2 degrees of special dynamic small use distribution flash as scale ring, which is the same as the actual drainage solution A2
Min part of the more removed
Measurement cavity relaxation weight see Table A2.
Status: 2:
Yin to press blood volume
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.