GB/T 14917-1994 Instruments for testing earth-moving machinery

This standard specifies a list of instrumentation guidelines for inspecting earth-moving machinery on site. This standard does not include instruments used to dismantle machinery or in the workshop. This standard applies to crawler and wheeled tractors, crawler and wheeled loaders and hydraulic excavators. Other earth-moving machinery such as graders, self-propelled scrapers and dump trucks can also refer to this standard. GB/T 14917-1994 Instrumentation for earth-moving machinery GB/T14917-1994 Standard download decompression password: www.bzxz.net

UVC 621. 86:. 87 1 681. 12
National Standard of the People's Republic of China
GB/T 14917—94
Earth-moving machinery--Service instrumentation1994-01-11Promulgated
1994-10-01Implementation
Promulgated by the State Bureau of Technical Supervision
National Standard of the People's Republic of China
Earth-moving machinery--Service instrumentationEarth-moving machinery--Service instrumentationThis standard is equivalent to the international standard 56012-9% earth-moving machinery service instrumentation. 1 Subject content and scope of application
This standard specifies the instrumentation for detecting earth-moving diseases on site - Overview: This standard covers the instruments that have been dismantled from the machine or used in the workshop. GB/T 14917--94
This standard is applicable to belt-type and wheel-type tractors, belt-type loaders, hydraulic excavators, and other earth-moving machines such as self-propelled shovel loaders and self-propelled trucks. 2 Inspection items and instruments
1 stipulates that "each inspection corresponds to an instrument. The meanings of the letters in the table are as follows: A——Required (if the machine has this inspection item) B——Recommended inspection, but not necessary. The recommended gauge for each inspection item is the commonly used internal gauge, and when there is a more advanced instrument, it can also be selected. The range of the gauge or the instrument should be changed accordingly.
Approved by the State Technical Supervision Bureau on January 11, 1994, implemented on October 01, 1994
Valve gauge
Inspection found no
Fuel injection
Engine oil pressure
Intake manifold pressure (increase Engine)
Exhaust pressure before and after the engine
Dynamic limit filling front and rear exhaust gas distribution (positive engine) after the air energy derivation part
Cooling effect temperature
Cooling flow anti-connection agent spherical degree
Net intelligence system flow support
Engine speed
Cold start cold card
Look at the combined lubricating force
Will create a lubricating oil force
Reduced Le speed control oil
Transformer oil
When the speed is high, the control plan will be high
Engine plan high clutch oil pressure
Use limit special note
Oil flow (station H above winter)
GB/T 14917-94
Jade force method
(1520)
its empty meter
(mH,0kmmHg）
Construction site inspection earthmoving machine
495650
130200
Please measure
(L/rnin)
Machinery required instrument guide-digital table
pressure juice
oil nozzle
test face instrument
25~~4D
GB/T149194
meter: standard
pressure let
to degree single;
heavy battery dare to remember
electric tester
shenzhen labor joint strength law design oil knowledge management
power market capital
night note wish slip
step light three
installation special product
engine control oil pressure
brake system production gas industry
its empty force system true determination
steering control method out
engine can special control danger out
forget pressure belt real parts suction scanning
(track special support heavy wheel, internal absolute, etc.)
and safety word positive
work god sell internal huge force
bag" rush blue
proclaim! Oil sinking station
Energy sinking force
Busy oil sinking depth
Overall speed
Electric bridge control concentration certificate
Electric low voltage and various test purchases
Screw nut cabinet
Each part is required to operate the system. Various room courtyards
GB/T 14917-—94
515263
Vacuum gauge
(n:HkrumHg）
Montreal meter
001302wwW.bzxz.Net
Flow meter
(Lrin)
3. 3(206)
Transfer:
Item Standard
Long Regulator
25~-40
GB/T 14917-94
Cyclic Test System
19c mura
society (group standard
happy time#
position is 17
matching meter
electric measuring instrument
additional instructions:
GH/T14917-94
This standard was proposed by the Ministry of Engineering of the People's Republic of China, and this standard was proposed by the Ministry of Machinery Equipment and China Vehicle Standardization Technical Unit Beijing Institute of Building Machinery. This standard was drafted by the Ministry of Equipment and China Vehicle Standardization Technical Unit Beijing Institute of Building Machinery. This standard was drafted by the Ministry of Equipment and China Vehicle Standardization Technical Unit Beijing Institute of Building Machinery. This standard was drafted by the Ministry of Equipment and China Vehicle Standardization Technical Unit Beijing Institute of Building Machinery. This standard was commissioned by the Ministry of Industry and Information Technology of the People's Republic of China, and was issued by the Ministry of Health and Environmental Protection of the People's Republic of China,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.