GB/T 15902-1995 Test method for elastic modulus of fabric core conveyor belts
time:
2024-08-08 13:17:51
- GB/T 15902-1995
- in force
Standard ID:
GB/T 15902-1995
Standard Name:
Test method for elastic modulus of fabric core conveyor belts
Chinese Name:
织物芯输送带弹性模量试验方法
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01
Standard ICS number:
Material storage and transportation equipment>>Continuous handling equipment>>53.040.20 Conveyor partsChina Standard Classification Number:
Chemicals>>Rubber Products and Auxiliary Materials>>G42 Hose, Tape, and Plaster
alternative situation:
Replaced by GB/T 15902-2009Procurement status:
=ISO 9856-89
Release date:
1995-12-20Review date:
2004-10-14Drafting Organization:
Qingdao No.6 Rubber FactoryFocal point Organization:
China Petroleum and Chemical Industry AssociationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Petroleum and Chemical Industry Association
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the test method for elastic modulus of various fabric core conveyor belts. The elastic modulus values measured in this standard can be used for selection in belt conveyor design and can also be used to evaluate the physical and mechanical properties of conveyor belts. GB/T 15902-1995 Test method for elastic modulus of fabric core conveyor belts GB/T15902-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 7028-1993 Technical requirements for turbine discs and impeller forgings below 25MW
- JB/T 9961-1999 Accuracy of open transfer presses
- NY/T 1156.12-2008 Guidelines for indoor bioassay tests for pesticides Fungicides Part 12: Pot method for control of late blight
- QB/T 3528-1999 Fuse paper (fuse paper)
- JB/T 5140.1-1999 Technical requirements for magnetic motors
- FZ/T 70006-2004 Test method for tensile elastic recovery of knitted fabrics
- GB 156-2003 Standard Voltage
- JB/T 3593-1999 Heat-treated powder metallurgy iron-based structural materials
- GB 17404-1998 Good Manufacturing Practice for Puffed Foods
- JB/T 5494-1991 Inclined shaft man-car
- HG/T 3117-1998 Acid-resistant ceramic containers
- GB/T 14956-1994 Special copper and copper alloy wire
- GB/T 4074.1-1999 Winding wire test methods Part 1: General provisions
- JB/T 8810.2-1998 Single-line lubrication pump 31.5MPa
- GB/T 12729.3-1991 Spices and condiments-Preperation of ground sample for analysis
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com