HG/T 2224-1991 Determination of average compressive strength of granular triple superphosphate
time:
2024-08-13 09:55:41
- HG/T 2224-1991
- in force
Standard ID:
HG/T 2224-1991
Standard Name:
Determination of average compressive strength of granular triple superphosphate
Chinese Name:
粒状重过磷酸钙的颗粒平均抗压强度测定
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1991-11-15 -
Date of Implementation:
1992-07-01
Standard ICS number:
Agriculture>>65.080 FertilizerChina Standard Classification Number:
Chemical Industry>>Fertilizers, Pesticides>>G20 Basic Standards and General Methods for Fertilizers
Skip to download
Summary:
HG/T 2224-1991 Determination of average compressive strength of granular superphosphate HG/T2224-1991 Standard download decompression password: www.bzxz.net
Some standard content:
Chemical Industry Standard of the People's Republic of China
HG2224—91
Determination of Average Compressive Strength of Granular Heavy Superphosphate 1991-11-15 Issued
Ministry of Chemical Industry of the People's Republic of ChinawwW.bzxz.Net
Implementation on July 1, 1992
W Chemical Industry Standard of the People's Republic of China
Determination of Average Compressive Strength of Granular Heavy Superphosphate 1 Subject Content and Scope of Application
This standard specifies the method for determining the average compressive strength of granular heavy superphosphate. This standard is applicable to the determination of the average compressive strength of granular heavy superphosphate. 2 Reference Standard
HG2223 Determination of Particle Size of Granular Heavy Superphosphate 3 Summary of Method
HG2224—91
Select a certain number of heavy superphosphate fertilizer granules within a specified particle size range, and determine the minimum force required to crush each granule to obtain the average value.
4 Instruments
4.1 Particle strength tester: sensitivity 0.5N; 4.2 Tweezers.
5 Operation steps
Randomly select 30 2.0~2.8mm heavy superphosphate fertilizer granules obtained by HG2223 medium particle size determination, and measure the minimum force required to crush each granule.
6 Result expression
The average compressive strength X of the granules expressed in Newton is calculated as follows: X=
Where: X, the minimum force required to crush each fertilizer granule, N. The result should be expressed to one decimal place.
Additional remarks:
This standard is proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the Shanghai Research Institute of Chemical Industry of the Ministry of Chemical Industry. This standard was drafted by the Shanghai Research Institute of Chemical Industry of the Ministry of Chemical Industry and Yunnan Phosphate Fertilizer Factory. The main drafters of this standard are Yin Yongkang, Chen Xuezhi and Xie Ruiming. Approved by the Ministry of Chemical Industry of the People's Republic of China on November 15, 1991 and implemented on July 1, 1992
W.bzsoso.cOm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
HG2224—91
Determination of Average Compressive Strength of Granular Heavy Superphosphate 1991-11-15 Issued
Ministry of Chemical Industry of the People's Republic of ChinawwW.bzxz.Net
Implementation on July 1, 1992
W Chemical Industry Standard of the People's Republic of China
Determination of Average Compressive Strength of Granular Heavy Superphosphate 1 Subject Content and Scope of Application
This standard specifies the method for determining the average compressive strength of granular heavy superphosphate. This standard is applicable to the determination of the average compressive strength of granular heavy superphosphate. 2 Reference Standard
HG2223 Determination of Particle Size of Granular Heavy Superphosphate 3 Summary of Method
HG2224—91
Select a certain number of heavy superphosphate fertilizer granules within a specified particle size range, and determine the minimum force required to crush each granule to obtain the average value.
4 Instruments
4.1 Particle strength tester: sensitivity 0.5N; 4.2 Tweezers.
5 Operation steps
Randomly select 30 2.0~2.8mm heavy superphosphate fertilizer granules obtained by HG2223 medium particle size determination, and measure the minimum force required to crush each granule.
6 Result expression
The average compressive strength X of the granules expressed in Newton is calculated as follows: X=
Where: X, the minimum force required to crush each fertilizer granule, N. The result should be expressed to one decimal place.
Additional remarks:
This standard is proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the Shanghai Research Institute of Chemical Industry of the Ministry of Chemical Industry. This standard was drafted by the Shanghai Research Institute of Chemical Industry of the Ministry of Chemical Industry and Yunnan Phosphate Fertilizer Factory. The main drafters of this standard are Yin Yongkang, Chen Xuezhi and Xie Ruiming. Approved by the Ministry of Chemical Industry of the People's Republic of China on November 15, 1991 and implemented on July 1, 1992
W.bzsoso.cOm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 5626.2-1985 Flared tapered thread straight pipe fitting body
- HG/T 2135-1991 Glass-lined 180° elbow
- JB/T 8854.1-2001 GCLD type drum gear coupling
- GB 17988-2004 Safety and sanitation requirements for tableware disinfection cabinets
- JB/T 6991-1993 Peripheral transmission concentrator
- GB 16692-1996 Butane gas cylinders for portable stoves
- QB/T 2241-1996 Alkyl cinnamaldehyde
- GB/T 14598.14-1998 Electrical disturbance tests for measuring relays and protection devices Part 2: Electrostatic discharge tests
- GB/T 4958.5-1988 Measurement methods for equipment used in terrestrial radio-relay systems Part 2: Subsystem measurements Section 4: Frequency modulator
- GB/T 4768-1995 Mould-proof packaging
- JB/T 6756.9-1993 Test methods for special equipment for wires and cables Part 9: QH series enameling equipment
- GB/T 321-1980 Preferred numbers and preferred number series
- GB/T 15126-1994 Information processing system data communication network service definition
- GB 17017-1997 Standard for the control of endemic fluorosis areas
- JB/T 9868.1-1999 Bulk feed transport vehicle types and parameters
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com