INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

JB/T 4724-1992 Support bearing

time: 1993-03-06 16:00:00
  • JB/T 4724-1992
  • Abolished

Basic Information

  • Standard ID:

    JB/T 4724-1992

  • Standard Name:

    Support bearing

  • Chinese Name:

    支承式支座

  • Standard category:

    Machinery Industry Standard (JB)

  • Date of Release:

    1993-03-06

  • Date of Implementation:

    1993-05-01

  • Date of Expiration:

    2008-02-01

standard classification number

  • China Standard Classification Number:

    Machinery>>General Machinery and Equipment>>J74 Pressure Vessel

associated standards

Publication information

  • publishing house:

    Machinery Industry Press

  • Publication date:

    2004-04-23

Other Information

  • Focal point Organization:

    National Pressure Vessel Standardization Technical Committee Design Subcommittee

  • Publishing Department:

    National Pressure Vessel Standardization Technical Committee Design Subcommittee
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard specifies the structural type, series parameter dimensions, allowable load, manufacturing requirements and selection methods of supported bearings. This standard applies to steel vertical cylindrical containers under the following conditions: a. Nominal diameter DN800mm~4000mm; b. The ratio of cylinder length L to nominal diameter DN L/DN≤5; c. Total height of the container H0≤10m . JB/T 4724-1992 supporting bearing JB/T4724-1992 standard download and decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

Theme content and applicable examples
1.1 Theme content
Industry standards of the People's Republic of China,
Supported bearings
JB/ T4724-92 wwW.bzxz.Net
This standard specifies the structural type, series parameter dimensions, allowable load, manufacturing requirements and selection methods of support bearings. 1. 2 Scope of application
This standard is applicable to steel vertical circular simplified containers under the following conditions: a. Nominal diameter DN800mm ~ 4000mm;
b. The ratio between the circular length L and the nominal diameter DN RatioL/DN
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com