GB/T 3780.8-2002 Determination of heating loss of carbon black

This standard specifies the determination method of heating loss of carbon black. This standard is applicable to the determination of heating loss of carbon black for rubber, acetylene carbon black and pigment carbon black. This standard is not applicable to treated carbon black containing additional volatile substances. GB/T 3780.8-2002 Determination of heating loss of carbon black GB/T3780.8-2002 Standard download decompression password: www.bzxz.net

JCS.83-040.20
National Standard of the People's Republic of China
GB/T 3780.B—2002
eqvIso1126:1992
Determination of carbon black heating loss
Carhon hlack--Jetermination of heating loss2002-05-29Promulgated
People's Republic of China
General Administration of Quality Supervision, Inspection and Quarantine
2002-12.01Implementation
GB/T3780.8—2002
This standard is equivalent to the international standard 11:1 Determination of heating loss of carbon black for rubber compounding agents and is adjusted from the user standard GB/T3760.51S2 Determination of heating loss of carbon black. This standard is consistent with the technical requirements of SC1126:1992. The method is a general method. In the "standard application" chapter, the color requirement and the block image are added. -6.7 Note that the block to be weighed is 1. This standard stipulates that the test results are used for revision. The main technical differences between this standard (GB/3780.81952 standard) are: the actual measurement of heat S2 (1 (2) 105! 2) is sufficient. In 6.2, "add the added value of the company" is added. The reference standard GBT817-1! 87*.
. - Added test result modification and revision. Added currentness: | |tt||This standard will replace GB/T 3780.8-1992 from the date of implementation. This standard is issued by the State Bureau of Petroleum and Chemical Industry. This standard is the technical committee of the National Rubber Equipment Standardization Bureau. Drafting unit of this standard: China National Institute of Standards and Technology. This standard was first issued in June 1933: June 1932. First revision: GB/T 3780.8-2002
sO Foreword
International Organization for Standardization (ISO) is a world organization that members of the International Organization for Standardization (IS). The work of formulating international standards is usually carried out by technical committees of IS. All members of the committees established by the committees have the right to participate in the relevant technical requirements. International organizations, both governmental and non-governmental, in contact with ISO may also participate in this work. In all aspects of electrotechnical standardization, SC cooperates closely with the International Electrotechnical Commission (IEC). The draft international standards adopted by the technical committee shall be sent to the member groups for voting. When the international standard is issued, at least 75% of the member groups interested in voting shall be required to vote. International Standard ISQ11261S0/C45 Rubber and Rubber Products Technical Committee, SC Rubber Industrial Raw Materials including Latex> Technical Committee,
This standard is the first edition, the first edition is technically tested and replaced by the second edition [S0] 113%, 1985 National Standard of the People's Republic of China
Determination of Heating Loss of Carbon Black
Carhon Hiack-Dctermination of heating loss of luss #/T 3780.8—2002
eq1501126:1992
378019
Note: Personnel using this standard should be familiar with routine laboratory operations, water standards and any safety precautions in use. Users are responsible for establishing appropriate safety and health measures and ensuring compliance with national regulations. 1 Scope
This standard specifies the determination of trace amounts of carbon black for a period of time. This standard applies to the determination of the heating loss of rubber, acetylene black and pigment baking black. ) This standard does not apply to the effective black containing volatile substances. 2 The referenced standards are not applicable to the following provisions, which are used in this standard. When the standard is published, the versions shown are valid. All standards may be revised. The parties using this standard should explore the possibility of using the latest version of the following standards. GB3776-1994 Carbon black for road use
15/T3782-3 Technical conditions for carbon black
GR/T74-90 Color carbon black filling conditions
GnR1 General principles of numerical control
3 Summary of the method
The weighed hot test sample is heated at 105 °C for 1h in a weighed temperature. After cooling to the required volume in the detonator, calculate the heating reduction ratio.
4 Instruments and equipment
4.1 Constant silver T coupling box: heavy dose flow type, called grid at (105±2) ℃ or (125=2) ℃, 4.2 Weighing pan bottle type production 30mm, diameter 59mm, equipped with a friction mouth Ruiyi. 4.3 Analytical balance, fine (1.1 1g.
Lower dryer.
5 Collection #
Depending on the different forms of carbon black, GSY9, GB/T 2 are respectively used for sampling according to the provisions of GB/T7044. Instructions for use:
1][9112 No 7. Quick results,
[1 No fixed Www.bzxZ.net
Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on 2002-D05-29 on 2002-12 -1 Step 6 GB/T3780.82002 6.1 Place the frozen sample in a constant temperature of 105 ± 2 (125°C) for 30 min, then place the bottle and cap in a desiccator and allow it to cool to 150°C. Weigh the sample (m2) to an accuracy of (1 mg). 6.2 Weigh the sample (m2) to an accuracy of 0.1 mp±, and weigh about 1 mg. 6.3 Place the sample in a desiccator and place in a desiccator. Bottle, dry for 1h at (1u5+2)T or 12312). 6. For printing, put the weighed product in a dryer, open the bottle, cool it down, weigh the milk (presumably, weigh to 0.1mg
1 can be tested, the skin will have the requirements according to the situation and only need to have the amount of splashing hot content of the bottle mouth to wake up the environment 7 to make the detailed product reach the air quality, 2 from the dryer and put the weighed product in the constant range to ensure the good quality, so as to avoid the blackening of the fire due to the change of H gas flow. The foil result is expressed by the mass percentage table, calculated according to formula 1): -m× 130
Where: m.
Weigh the weight of the bottle cap and the test tube before heating: weigh the weight of the bottle cap and the test tube after heating.
The test result is more than the effective value specified in GB3716G/T3732 or GB/T7C44, take the common value, and then connect (:K/T817U) to the test tube.
8Precision21
The difference between the two test results shall not exceed the average value 2:8.2Reproducibility
The difference between the two test results shall not exceed 0 .%:
0The test report
test report shall include the following contents:
) the certificate number on which this test is based;
5) the scientific and technical basis of the test:
c) experimental temperature:
shan) the average value of the two measurement results:
) abnormal phenomena caused by the test
f) the operating steps that cannot be completed;
test period
average usage list:
11S11126No such regulation starts
21[S)1:26This regulation,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.