
GB/T 5493-1985 Grain and oil inspection types and intermixing inspection methods
time:
2024-08-04 16:31:28
- GB/T 5493-1985
- Abolished
Standard ID:
GB/T 5493-1985
Standard Name:
Grain and oil inspection types and intermixing inspection methods
Chinese Name:
粮食、油料检验 类型及互混检验法
Standard category:
National Standard (GB)
-
Date of Release:
1985-01-01 -
Date of Implementation:
1986-07-01 -
Date of Expiration:
2009-01-20
Standard ICS number:
Food Technology >> 67.040 Food ComprehensiveChina Standard Classification Number:
Food>>Food Processing and Products>>X10 Food Processing and Products Comprehensive
alternative situation:
Replaced by GB/T 5493-2008
Release date:
1985-11-02Review date:
2004-10-14Drafting Organization:
Grain Storage and Transportation Bureau, Ministry of CommerceFocal point Organization:
National Technical Committee on Grain and Oil StandardizationPublishing Department:
National Bureau of StandardsCompetent Authority:
State Grain Administration

Skip to download
Summary:
This standard applies to the inspection of commodity grains and oilseeds types and their mixing. Different methods should be adopted according to different requirements. GB/T 5493-1985 Grain and oilseed inspection types and mixing inspection methods GB/T5493-1985 standard download decompression password: www.bzxz.net

Some standard content:
Standard Announcement
China Standardization 2006.07
GB/T5493-1985 "Grain and Oil Inspection Types and Mixing Inspection Methods" National Standard No. 1 Amendment This amendment has been approved by the National Standardization Administration on June 9, 2006, and will be implemented from July 1, 2006.
The corrections are as follows:
a. Change the first line of Article 2.1:
"The middle part of the grain can be cut off" to "The middle part of the grain can be cut off horizontally". b. Change the first line of Article 2.1: bzxZ.net
"The glassy transparent body is the hard part\" to "The glassy transparent body and the translucent body are the hard part" Published in the 7th issue of "China Standardization" in 200646
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
China Standardization 2006.07
GB/T5493-1985 "Grain and Oil Inspection Types and Mixing Inspection Methods" National Standard No. 1 Amendment This amendment has been approved by the National Standardization Administration on June 9, 2006, and will be implemented from July 1, 2006.
The corrections are as follows:
a. Change the first line of Article 2.1:
"The middle part of the grain can be cut off" to "The middle part of the grain can be cut off horizontally". b. Change the first line of Article 2.1: bzxZ.net
"The glassy transparent body is the hard part\" to "The glassy transparent body and the translucent body are the hard part" Published in the 7th issue of "China Standardization" in 200646
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 39315.6-2020 General resource of military and civilian—Data Model—Part 6:Facilities
- GB/T 15416-1994 China STANDARD scientific and technical report numbering
- GB/T 2826-1981 Technical requirements for rail pads with a weight of 38-50 kg per meter
- GB/T 8651-2002 Ultrasonic flaw detection method for metal sheets
- GB/T 3317-1982 General technical requirements for electric locomotives
- JB/T 8364.5-1996 60° tapered pipe thread rolling wheel
- JB/T 8362.1-1997 Bevel gear quenching machine accuracy inspection
- GB/T 3792.5-1985 Bibliographical description for archives
- GB/T 23691-2009 Project management - Terminology
- JG/T 3051-1998 PVC plastic floor spring door JG/T3051-1998
- GB 3751.1-1983 Compression-type pressure gauge pipe joints
- JB/T 50093-1997 Rolling bearing life and reliability test evaluation method
- GB 20596-2006 Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Germ cell mutagenicity
- GB/T 3543.2-1995 Inspection procedures for crop seeds - Sampling
- JB/T 6046-1992 Post-weld heat treatment method for carbon steel and low alloy steel welded components
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com