JB/T 9162.22-1999 Dimensions of fine-adjustment clamps
time:
2024-08-11 18:18:57
- JB/T 9162.22-1999
- in force
Standard ID:
JB/T 9162.22-1999
Standard Name:
Dimensions of fine-adjustment clamps
Chinese Name:
微调表夹 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.22-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.22-1999 JB/T 9162.22-1999 Fine-tuning clamp dimensions JB/T9162.22-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of ChinaWww.bzxZ.net
Fine-adjustabie dial
Dimensions
Fine-adjustabie dial holdcr
Dimensions
De-marking specifies the type and size of the micrometer
Type change and size change regulations
Marking:
Installation screw hole MI Door source mark M10『B.T9162.22—1999
National Machinery Industry Kitchen 1999-05-20 approved 58
IB/T9162.22—1999
Generation 7.n.144Go1.22-g7
2nd 0-01-1! Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of ChinaWww.bzxZ.net
Fine-adjustabie dial
Dimensions
Fine-adjustabie dial holdcr
Dimensions
De-marking specifies the type and size of the micrometer
Type change and size change regulations
Marking:
Installation screw hole MI Door source mark M10『B.T9162.22—1999
National Machinery Industry Kitchen 1999-05-20 approved 58
IB/T9162.22—1999
Generation 7.n.144Go1.22-g7
2nd 0-01-1! Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 16716.4-2010 Packaging and packaging waste—Part 4:Reuse
- GB/T 4088-2008 Statistical interpretation of data Estimation and hypothesis test of parameter in binomial distribution
- QB/T 3776-1999 Hard cheese
- HG 3284-2000 45% Malathion EC
- SY/T 5056-1993 Eccentric roller shaper
- SY 5540-1992 Labor quota for seismic exploration in beach areas
- GB/T 4181-1997 Tungsten wire
- HG/T 2191-1991 Rubber Adhesive A
- HG 2168-1991 Chlorotoluron technical
- GB/T 15234-1994 Plastics flat pallets
- GB 50188-1993 Village and town planning standards GB50188-93
- GB/T 27027-2008 Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity
- GB 18280-2000 Sterilization confirmation and routine control requirements for medical care products Radiation sterilization
- GB 15762-1995 Autoclaved aerated concrete slab
- JB/T 6731.3-1993 Rules for compiling product names and models of carburetors for small gasoline engines
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com