Industrial wire screens and woven wire cloth--Guide to the choice of aperture size and wire diameter combination --Part 2:Preferred combinations for woven wire cloth

This part of GB/T 19628 specifies the relationship between the basic mesh size of industrial metal wire textile mesh and the preferred combination of metal wire diameter. This part is applicable to metal wire woven mesh with mesh size ranging from 0.02mm to 16mm. GB/T 19628.2-2005 Guide to the selection of mesh size and wire diameter combination of industrial metal wire mesh and metal wire woven mesh Preferred combination selection of metal wire woven mesh GB/T19628.2-2005 Standard download decompression password: www.bzxz.net
This part of GB/T 19628 specifies the relationship between the basic mesh size of industrial metal wire textile mesh and the preferred combination of metal wire diameter. This part is applicable to metal wire woven mesh with mesh size ranging from 0.02mm to 16mm.

ICS 73. 120
National Standard of the People's Republic of China
GB/T19628.2—2005
Industrial wire screens and woven wire cloth--Guide to the choice of aperture size and wire diameter conbinations-Part 2: Preferred combinations for woven wire cloth(ISO4783-2:1989,MOD)
Published on January 13, 2005
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implementation on August 1, 2005
GB/T 19628.2---2005
This standard is a modification of SO4783-2:1989&T "Guide to the combination of mesh size and wire diameter for industrial metal mesh and metal wire woven mesh - Preferred combination selection of metal wire woven mesh". This standard is the second part of the series of standards for industrial metal wire mesh and metal wire woven mesh. This series of standards will include: GB/T5330.1-2000 Guide to the combination of mesh size and wire diameter for industrial metal screens and other metal wire woven meshes - General rules:
G8/19628.2=2005 Guide to the combination of mesh size and wire diameter for industrial metal bag nets and metal wire woven meshes - Preferred combination selection of metal wire woven meshes; GF/T19628.3 Guide to the combination of mesh size and wire diameter for industrial metal mesh and metal wire woven mesh - Preferred combination selection of pre-bent or pressure-welded metal wire meshes. This standard is different from ISO4783-2:1989, for example, the table of material density is placed in Appendix A. Appendix A of this standard is an informative appendix.
This standard was proposed by the National Technical Committee for Standardization of Screen Screening and Particle Sorting Methods (CSBTS/TC168). This standard was drafted by the National Technical Committee for Standardization of Screen Screening and Particle Sorting Methods. The drafters of this standard are Yu Fang, Wu Guofei, and Huang Gang. This standard is interpreted by the Secretariat of the National Technical Committee for Standardization of Screen Screening and Particle Sorting Methods. 1 Scope
Guide to the selection of mesh size and wire diameter combination of industrial metal wire mesh and metal wire woven mesh Preferred combination selection of metal wire woven mesh
GB/T 19628.2--2005
This part of GB/T19628 specifies the relationship between the basic mesh size and wire diameter combination of industrial metal wire woven mesh. This part is applicable to metal wire mesh with mesh size ranging from 0.02mm to 16tmm. 2 Normative references
The clauses in the following documents become the clauses of this part through reference in this part of GB/T19628. For dated reference documents, all subsequent amendments (excluding errata) or revisions are not applicable to this part. However, parties to agreements based on this part are encouraged to study whether the latest versions of these documents can be used. For undated reference documents, the latest versions are applicable to this part.
GB/T10611 Industrial mesh marking method and mesh size series (IS02194:1991, M0D) GB/T15602 Industrial sieves and screening terms (egvISO9045:1990) JB/T7860 Metal wire for industrial mesh
JS0)4782 Gold coupling wire for industrial metal wire mesh and metal wire woven mesh 3 Marking method
T Industrial metal wire woven mesh should be marked in the following order: a) basic mesh size w see Figure 1);
b) metal wire diameter (see Figure 1):
c) metal wire material;
weaving type (see Figure 2).
d—Wire diameter:
—Basic size of two holes
Figure 1 Basic size of mesh and wire diameter
GB/T 19628.2—2005
Mesh size and wire diameter combination
Table 1 lists the preferred combinations of mesh size and wire diameter of metal wire woven nets, and lists the opening rate A of each combination. And the net weight per unit area A.
Flat weaving
5 Net weight per unit area
Figure 2 Weaving type
Twill weave
The net weight per unit area of ​​industrial metal wire mesh or metal wire woven net is in kg/1n, which is calculated by the following formula: de
Pa 618. [(w+d)
Wherein:
tWire diameter, in millimeters (mm); eBasic mesh size, in millimeters (mm): -Material density, in grams per cubic meter (kg/m3), the material density value is selected from Table A, 1 in Appendix A: Basic mesh size wimm
Table 1 Preferred combinations of mesh size and wire diameter Metal wire
FPorosity
Unit area
Mesh weight·
(kg/m3*）
Basic tree hole size wmm
GB/T19628.2--2005
Metal wire
Opening rate
Unit area
(kg/m3)
GB/T 19628.2—2005
Basic size of mesh u/mm
Metal wire
Opening rate
Table 1 (continued)
Unit area
(kg/m2)
Basic size of mesh u/mm
R10R20
3. 15! 3. 15
Metal wire
Opening rate
Unit area
Net weight"
(kg/m')
Basic size of mesh flower/mm
Metal finish
0, 800
Opening rate
Table (continued)
Unit area
Net weight?
(kg/m*)
Basic size of mesh holezo/mm
R40/3!
GB/T19628.2—2005
Metal wire
Opening rate
Unit area
Net weight"
(kg/m')
GB/T 19628.2—2005
Basic mesh size w/mm
Metal wire
Opening rate
0. 200 ↓
0,250
0, 140
Table 1 (continued)
Single coin area
Valve weight"
(kg/a)bzxZ.net
Basic mesh size w/mm
R40/3!
Metal wire
0. 355 0. 280
Opening rate
Unit area
(kg/m*)
Basic size of mesh/mtm
Metal wire
0.125!0.125
Opening rate
Table (continued)
Unit area
Weight of mesh.
(kg/m*)
For ordinary boiler, pm7 850kg/m (see Chapter 5)Basic size of mesh w/mm
0.0320.032
GB/T 19628.2—2005
Metal wire
Opening rate
Unit area
(kg/m2)
Heart, 13
GB/T19628.2—2005
A.1 Density of materials
The value of density β of materials is shown in Table A, 1,
Ordinary steel
Stainless steel (Cr1719%, Ni8-10%)||t t||Saw (AIMg5)
Brass (CuZn37)
Yellow (CuZn20)
Cut pot (CuZnl0)
Nickel copper alloy (NiCu30Fe)
Copper steel alloy (CuSn6) (Beiqing pin)
Note: ISO grades are in brackets.
Appendix A
(Informative Appendix)
Density of materials
A. 1 Density of materials
Density p/(kg/m)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.