JB/T 7313-1994 Basic types and rated lifting capacity of lifting vehicles

This standard specifies the basic types and rated lifting capacity series of lifting vehicles. This standard applies to lifting vehicles powered by human power, internal combustion engines and electric motors. JB/T 7313-1994 Basic types and rated lifting capacity of lifting vehicles JB/T7313-1994 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T7313-94
Lifting Vehicle
Basic Type and Rated Lifting Weight Series
Published on July 18, 1994
Ministry of Machinery Industry of the People's Republic of China
Implementation on July 1, 1995
Mechanical Industry Standard of the People's Republic of China
Lifting Vehicle
Basic Type and Rated Lifting Weight Series
1 Subject Content and Scope of Application
This standard specifies the basic type and rated lifting weight series of lifting vehicles. This standard applies to lifting vehicles with human power, internal combustion engines and electric motors as power sources. 2 Basic Type
The basic types of lifting vehicles are shown in the table below.
Stacking (high-lift) vehicles
Lifting vehicles
Non-stacking vehicles
Rated lifting weight series
The rated lifting weight series of lifting vehicles are: counterbalanced forklifts
reach forklifts
forklifts
pallet stacker
platform stacker
JB/T 7313--94
『Forward-moving mast
Forklift forward-moving
Vehicles with liftable operating position
Side-mounted forklift
Off-road forklift
Side-mounted stacker
Three-way stacker
Telescopic forklift
Pallet truck
Platform truckwwW.bzxz.Net
Non-stacking straddle truck
Sorting truck
0,20.0.25.0.32,0 .40.0.50,0.63,0.80,1.0,1.25,(1.5),1.6,(1.75).2.0,(2.25).2.5.(2.75),3.0.3.5,4.0.4.5.5.0.5.5.6.0.7.0,8.0.9.0,10,12.14.(15).16.18.20.22.25.28.32.37.(38).42t,Note: The values ​​in brackets are not preferred. Approved by the Ministry of Machinery Industry on July 18, 1994
Implemented on July 1, 1995
Additional Notes:
JB/T731394
This standard is proposed and managed by the Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Forklift Branch of Beijing Hoisting and Conveying Machinery Research Institute. The main drafter of this standard is Teng Xing.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.