QB/T 2224-1996 Technical requirements for low temperature flexure of upper materials

This standard specifies the low temperature flex performance index of the upper materials of footwear products worn in winter. It is applicable to various upper materials. QB/T 2224-1996 Technical conditions for low temperature flexure of upper materials QB/T2224-1996 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB/12224~2226-96
Shoemaking Standard
1996-06-06 Release
China Light Industry General Association
19-03-01 Implementation
Industry Standard of the People's Republic of China
Upper Material
Technical Conditions for Low-temperature Metal Flexure
Q/T 2224-96
When footwear is worn under low-temperature conditions: there is no generation of grade (fission fusion type). The shoemaking industry can select materials with low resistance to painting for the manufacture of tourism, ancient land and cotton models, etc.: for this reason, he set the shoemaking materials with low sintering resistance as the selection index and the shoemaking materials for the supply of technical repair
This standard is issued by the China Light Industry General Association Quality Standard Department. Military Standard National Standardization Careful Mountain. This standard is the product of the China Light Industry Association Footwear Research Institute, Li Ning and Yi Gongwu, and Shanyun Industry Co., Ltd. This standard is the product of the founders, Yu Moying, Cheng Xiaoxu, Li Renfen, Chen Zhengxin, Lian Peizhong, and this standard was first issued in June 1999.
China Light Industry Standard
Upper Materials
Low Temperature Cabinet Technical Conditions
OB/1 22298
This standard specifies the low temperature performance indicators of upper materials for footwear products, and is applicable to all kinds of upper materials.
± Reference Standards
The provisions contained in the following standards will be incorporated into the provisions of this standard through the addition of the technical standards. At the time of publication of the standard, the versions shown are valid. All standards will be revised, and all parties to this standard should consider the possibility of testing the following new versions.
Q51471——1992 Zhengye Boots
3 Product Categories
&.1 Genuine upper leather;
. Modified surface:
3.3 Film rolling surface benzene
3,1 various surface materials (including synthetic leather, artificial leather, combined stretch materials, Huiruihao paper sound, etc.); a,6 fabric upper materials.
4 Technical requirements
When the specified number of modifications is achieved, no surface climbing or cracking of the shoe fabric (including cracking or tearing) shall occur on the surface of the shoe material (including cracking or tearing).
Number of modifications
Positive upper leather
Decorated upper leather
Film-coated upper surface
Artificial upper materialsbzxZ.net
Natural textile upper materials
Approved by China Light Industry Federation 188-1997, 10,000 times
1997-08-01 Implementation
Test method
QB/T·2224-96
5.1 The low-humidity agglomeration performance of the upper material shall be tested according to Appendix A of Q1471-1992. The test temperature is ~10±2℃, 5.2 The number of samples shall be not less than four pieces per sample (two pieces in each direction), the test row is 70m long and 65m wide, 3. The test scale is not allowed to have defects such as estimation marks, quality, dirt and scratches. 5.4 The original thickness of the sample shall be in accordance with the original thickness, but the thickness shall not exceed 2.5. B Inspection Rules
Core, 1 The upper materials of the same material, process, specification, year and month are regarded as a batch 6.2 Randomly select a sample from each batch of materials for testing: 8.8 The number of samples of a sample is not the same as the number of samples of superior products, first-class products or qualified products. If the number of samples is not the same, the batch of products is judged as superior products, first-class products or qualified products. If one or more samples do not meet the requirements of qualified products, the batch of products is judged as unqualified.
8.1 If the test results of different samples in the same frequency are different, the lower grade judgment is adopted. 6.5 If the total test does not meet the standard, the test shall be repeated with double the test results and the test results shall be confirmed. Marking
Each batch of products shall be marked with the following contents on the package. 7.1 Manufacturer name, address and city mark.
7.2 Product name (including main raw materials).
Daily production grade and number of this standard.
7.4 Inspection date.
7.5 Factory date.
7.6 Transportation requirements, etc.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.