Kilowatt-hour and megajoule conversion tables
time:
2024-08-10 15:06:12
- GB/T 4114-1983
- Abolished
Standard ID:
GB/T 4114-1983
Standard Name:
Kilowatt-hour and megajoule conversion tables
Chinese Name:
千瓦小时与兆焦耳的相互换算表
Standard category:
National Standard (GB)
-
Date of Release:
1983-01-02 -
Date of Implementation:
1984-10-01 -
Date of Expiration:
2005-10-14
Standard ICS number:
01.060.10China Standard Classification Number:
General>>Measurement>>A51 Quantity and Unit
Release date:
1983-12-26Review date:
2004-10-14Drafting Organization:
National Bureau of MetrologyFocal point Organization:
National Technical Committee for Standardization of Quantities and UnitsPublishing Department:
National Standardization AdministrationCompetent Authority:
National Standardization Administration
Skip to download
Summary:
This standard applies to all occasions where kilowatt-hours (kW.h) are converted into megajoules and megajoules are converted into kilowatt-hours. GB/T 4114-1983 Conversion table between kilowatt-hours and megajoules GB/T4114-1983 standard download decompression password: www.bzxz.net
This standard applies to all occasions where kilowatt-hours (kW.h) are converted into megajoules and megajoules are converted into kilowatt-hours.
This standard applies to all occasions where kilowatt-hours (kW.h) are converted into megajoules and megajoules are converted into kilowatt-hours.
Some standard content:
1 Introduction
National Standard of the People's Republic of China
Kilowatt-hour and megajoule conversion tables
UDC 531.78.081
GB 4114-83
1.1 This standard applies to all occasions where kW·h is converted into megajoule (M3) and megajoule is converted into kW·h. The conversion tables of this standard are limited to general conversions. The converted figures in the conversion tables are rounded to five significant figures in accordance with the provisions of GB1.1-81, and the figures below 1 are rounded to four decimal places. If necessary, the conversion factors given in 1.2 are used for calculation and rounding. The rounding rules are in accordance with the provisions of GB1.1-81 (see Appendix A of GB4116-83). 1.2 Conversion factor,
1kW. h=3.6MJ
1MJ = 1/3.6kW.h
Of which, 1kw.h=101W.h, 1M =10'1. 2 Conversion table
National Bureau of Standards 1988-12-26 Issued
1984-1 0 -01 Implementation
36,000
101-16
GB ±114—83
Table 1, kilowatt-hour to megajoule conversion table 1kw.h =3.6MI
18,720
1,4400
61,840
138,21
27,000
59-400
92,160
124,58
24,1 20
60,120
81,720
96, [20
143-28
146,88
125,64
154,44
284,40
GB 4114—8a
Continued Table 1
235,0F
278,28
188,64
246,60
362-16
330,12
197,28
276,84
5,HIOI)
10,861
9,5000
GB 4114—88
Conversion table of megajoule to dry watt-hour
1MJ =1/3.6kW.h
10,111
3,4722
10,139
10,417
0-4444wwW.bzxz.Net
2,G667
9,6111
7,#941
18,000||tt| |7,4722
16,389
19,194
GB 4114--B3
Tail table 2
25,111
25,972
11,889
23,222
19,639
16,889
17,444
19,667
21 ,056
27,722
14,417
16,083
21,083
22,194
24,417
25,806
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Kilowatt-hour and megajoule conversion tables
UDC 531.78.081
GB 4114-83
1.1 This standard applies to all occasions where kW·h is converted into megajoule (M3) and megajoule is converted into kW·h. The conversion tables of this standard are limited to general conversions. The converted figures in the conversion tables are rounded to five significant figures in accordance with the provisions of GB1.1-81, and the figures below 1 are rounded to four decimal places. If necessary, the conversion factors given in 1.2 are used for calculation and rounding. The rounding rules are in accordance with the provisions of GB1.1-81 (see Appendix A of GB4116-83). 1.2 Conversion factor,
1kW. h=3.6MJ
1MJ = 1/3.6kW.h
Of which, 1kw.h=101W.h, 1M =10'1. 2 Conversion table
National Bureau of Standards 1988-12-26 Issued
1984-1 0 -01 Implementation
36,000
101-16
GB ±114—83
Table 1, kilowatt-hour to megajoule conversion table 1kw.h =3.6MI
18,720
1,4400
61,840
138,21
27,000
59-400
92,160
124,58
24,1 20
60,120
81,720
96, [20
143-28
146,88
125,64
154,44
284,40
GB 4114—8a
Continued Table 1
235,0F
278,28
188,64
246,60
362-16
330,12
197,28
276,84
5,HIOI)
10,861
9,5000
GB 4114—88
Conversion table of megajoule to dry watt-hour
1MJ =1/3.6kW.h
10,111
3,4722
10,139
10,417
0-4444wwW.bzxz.Net
2,G667
9,6111
7,#941
18,000||tt| |7,4722
16,389
19,194
GB 4114--B3
Tail table 2
25,111
25,972
11,889
23,222
19,639
16,889
17,444
19,667
21 ,056
27,722
14,417
16,083
21,083
22,194
24,417
25,806
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 7406.2-1994 Testing machine terminology Nondestructive testing instruments
- GB/T 20001.2-2001 Rules for drafting STANDARDs--Part 2:Symbol
- JB/T 9169.3-1998 Process Management Guidelines Product Structure Processability Review
- JB/T 9272-1999 Ammonia pressure gauge
- JB/T 2203-1999 Spring-loaded safety valve structure length
- GB/T 15692.2-1995 Pharmaceutical machinery terminology API equipment and machinery
- JB/T 7682-1995 Serpentine spring safety coupling
- GB 18468-2001 Hygienic standard for p-dichlorobenzene in indoor air
- MT 232-1991 1t mine car shaft multi-rope cage
- JB/T 4414-1999 Roller printing biscuit forming machine
- GB/T 2435-1994 Test methods for cotton cord fabrics
- SY 5430-1992 Casing shoe leak test method for determining formation fracture pressure
- HG/T 20519.23-1992 Anticorrosion Materials Table
- GB/T 14662-1993 Technical requirements for punching dies
- JB/T 3411.85-1999 Dimensions of 45° boring bars with taper shank
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com