JB/T 991-1977 Welded cross pipe joint body
time:
2024-07-15 01:27:09
- JB/T 991-1977
- in force
Standard ID:
JB/T 991-1977
Standard Name:
Welded cross pipe joint body
Chinese Name:
焊接式四通管接头体
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-01-17 -
Date of Implementation:
1977-05-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 991-1967; replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 991-1977 Welded Cross Pipe Fitting Body JB/T991-1977 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
The First Machinery Industry Department of the People's Republic of China standard welded cross pipe joint body
Marking example:
Cross pipe joint body with a pipe outer diameter of 28mm: Joint body 28JB991--77
The First Machinery Industry Department of the People's Republic of China issued the First Machinery Industry Department Standardization Research Institute proposed 362
JB991-77
Replace JB991-67bzxz.net
The remaining 25
Implemented on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute and others drafted the pipe
M12×1.25
M42×2
M52×2
M60×2
Technical conditions are in accordance with the provisions of JB1003-77. JB99177
Nominal size
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Marking example:
Cross pipe joint body with a pipe outer diameter of 28mm: Joint body 28JB991--77
The First Machinery Industry Department of the People's Republic of China issued the First Machinery Industry Department Standardization Research Institute proposed 362
JB991-77
Replace JB991-67bzxz.net
The remaining 25
Implemented on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute and others drafted the pipe
M12×1.25
M42×2
M52×2
M60×2
Technical conditions are in accordance with the provisions of JB1003-77. JB99177
Nominal size
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 8038-1999 Machine tool fixture parts and component locks
- GB/T 20543.1-2011 Financial services—International bank account number (IBAN)—Part 1:Structure of the IBAN
- JB/T 7984.3-2001 Determination of density of common abrasives
- SY/T 5091-1993 Sulfonated tannin extract for drilling fluid
- JB/T 6973-1993 热喷涂操作人员考核要求
- JB/T 9935-1999 Preparation of technical documents for machine tool accessories
- JB/T 5784-1991 Test method for closed type glow plugs
- JB/T 4373-1999 Horizontal milling and boring machine inspection conditions accuracy inspection Part 4: Planer machine tool with moving column
- GB 15558.1-2003 Underground polyethylene (PE) piping systems for gas Part 1: Pipes
- JB/T 4311.3-1991 Indirect resistance furnace RT series trolley type resistance furnace
- GB/T 4333.2-1988 Chemical analysis methods for ferrosilicon - Bismuth phosphomolybdenum blue photometric method for the determination of phosphorus content
- GB/Z 6413.1-2003 Calculation method for the scuffing load capacity of cylindrical gears, bevel gears and hypoid gears Part 1: Flash temperature method
- SJ 1.2-1987 Provision and requirements for preparation and revision of technical standards for electronic industry-Principles and procedures for regulation of standards-preparation plans
- GB/T 16902.4-2010 Rules for the presentation of graphical symbols for use on equipment—Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays(icons)
- JJG 2005-1987 Brinel Hardness
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]