GB/T 15758-1995 Basic terms for splines
time:
2024-08-08 15:20:23
- GB/T 15758-1995
- Abolished
Standard ID:
GB/T 15758-1995
Standard Name:
Basic terms for splines
Chinese Name:
花键基本术语
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-01 -
Date of Implementation:
1996-07-01 -
Date of Expiration:
2009-05-01
Standard ICS number:
Mechanical systems and general parts>>Shafts and couplings>>21.120.30 Keys and keyways, splinesChina Standard Classification Number:
Machinery>>General Parts>>J18 Chain Drive, Belt Drive and Key Connection
alternative situation:
Replaced by GB/T 15758-2008Procurement status:
,
Release date:
1995-11-23Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Machine Shafts and AccessoriesPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Skip to download
Summary:
This standard specifies the basic terms and definitions of splines. This standard applies to rectangular, involute and end-tooth splines, and other splines can also be used as a reference. GB/T 15758-1995 Basic terms for splines GB/T15758-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG/T 2058.2-1991 Glass-lined finned thermometer sleeve
- GB/T 8588-2001 Basic terms for fishery resources
- JB/T 8347-1996 Graphic symbols for operating instructions of open presses
- WB/T 1044-2012 Pallet rack
- QB/T 2489-2000 Aloe vera products for food use
- NY/T 746-2003 Green food cabbage vegetables
- JB/T 9692.1-1999 Power frequency coreless induction melting iron (steel) furnace and iron holding furnace
- GB/T 16693-1996 Hose quick connector
- GB/T 4122.5-2002 Packaging terms--Inspection and tests
- GB/T 3394-1993 Determination of trace carbon monoxide and carbon dioxide in industrial ethylene and propylene by gas chromatography
- GB 30000.25-2013 Rules for classification and labelling of chemicals—Part 25:Specific target organ toxicity—Single exposure
- QB/T 2166-1995 Discus
- GB/T 3050-2000 General method for determination of chloride content in inorganic chemical products - Potentiometric titration
- GB/T 15819-1995 Test method and technical requirements for environmental stress cracking susceptibility of polyethylene (PE) 25 pipes for irrigation branches caused by inserted pipe fittings
- JB/T 9162.38-1999 Long probe dimensions
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com