JB/T 2001.10-1999 Types and dimensions of circular flanges for water systems (PN=20MPa)
time:
2024-08-14 17:11:50
- JB/T 2001.10-1999
- in force
Standard ID:
JB/T 2001.10-1999
Standard Name:
Types and dimensions of circular flanges for water systems (PN=20MPa)
Chinese Name:
水系统 圆附接法兰 型式与尺寸(PN=20MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2010-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical CommitteePublishing Department:
Metallurgical Equipment Standardization Technical Committee
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2001.10-1999 This standard is a revision of JB 2010-84 "Types and dimensions of circular flanges for hydraulic presses (Pg=200×100000Pa)". This standard specifies the types and dimensions of circular flanges. This standard is applicable to hydraulic systems with a nominal pressure of 20MPa. This standard was first published on January 1, 1984. JB/T 2001.10-1999 Types and dimensions of circular flanges for water systems (PN=20MPa) JB/T2001.10-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issuedwww.bzxz.net
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system-Round attached flangeTypeandkize
( PN-20 MPa ]
The standard specifies the type and size of the same inverted flange. This standard is used for the flow pressure system with a force of 20MPa. The referenced standard is B20184
The clauses contained in the following standards shall be the meaning of this standard through reference in this standard. When this standard is published, the versions shown are valid; all standards will be revised, so all parties to this standard should explore the possibility of using the latest version of the following standards. J3/T2001.5-1999 Type and size of flange pins and washers for water systems 3 Type and size
3.1 Type seat symbol includes the current definition of Figure 1:
-0, 2 5
Cap nail: 2 one: 3 one flange; 4 one connection: 5 one copper Figure 1
National Machinery Industry Bureau 1999-06-28 Standard 2000-01-01 Implementation
JBT2000-99
661100
"H small!
E01100NLr
2'o1'1002a
60110z1
801100z/8F
zor'10
Fur oot
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issuedwww.bzxz.net
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system-Round attached flangeTypeandkize
( PN-20 MPa ]
The standard specifies the type and size of the same inverted flange. This standard is used for the flow pressure system with a force of 20MPa. The referenced standard is B20184
The clauses contained in the following standards shall be the meaning of this standard through reference in this standard. When this standard is published, the versions shown are valid; all standards will be revised, so all parties to this standard should explore the possibility of using the latest version of the following standards. J3/T2001.5-1999 Type and size of flange pins and washers for water systems 3 Type and size
3.1 Type seat symbol includes the current definition of Figure 1:
-0, 2 5
Cap nail: 2 one: 3 one flange; 4 one connection: 5 one copper Figure 1
National Machinery Industry Bureau 1999-06-28 Standard 2000-01-01 Implementation
JBT2000-99
661100
"H small!
E01100NLr
2'o1'1002a
60110z1
801100z/8F
zor'10
Fur oot
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 27021.9-2021 Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 9:Competence requirements for auditing and certification of anti-bribery management systems
- HG 21514-1995 Types and technical requirements of manholes and handholes made of carbon steel and low alloy steel
- HG 20667-1986 Environmental Protection Design Regulations for Chemical Construction Projects
- JB/T 6384.2-1992 Cone seal welded bulkhead straight pipe joint
- HG/T 3062-1999 Determination of silicon dioxide content in dry samples of precipitated hydrated silicon dioxide in rubber compounding ingredients
- HG 2864-1997 Rubber bumper for vehicles
- GB 16381-1996 Diagnostic criteria and treatment principles for occupational dental erosion
- GB/T 15692.7-1995 Pharmaceutical machinery terminology Pharmaceutical packaging machinery
- GB 15193.1-2003 Food safety toxicology evaluation procedure
- GB/T 15431-1995 General specification for microcircuit modules
- JB/T 9229.1-1999 Scissor lift types and basic parameters
- HG/T 20637.5-1998 Preparation of instrument purchase order
- GB/T 8304-2002 Determination of moisture content in tea
- SJ 20054-1992 Semiconductor discrete device-Detail specification for silicon NPN low power switching transistor of Type 3DK101
- GB 13057-2003 Strength of passenger car seats and their vehicle fixings
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com