GB/T 15325-1994 Appearance quality of reciprocating rubber sealing rings
time:
2024-08-08 22:00:51
- GB/T 15325-1994
- in force
Standard ID:
GB/T 15325-1994
Standard Name:
Appearance quality of reciprocating rubber sealing rings
Chinese Name:
往复运动橡胶密封圈外观质量
Standard category:
National Standard (GB)
-
Date of Release:
1994-01-02 -
Date of Implementation:
1995-10-01
Standard ICS number:
Mechanical systems and general parts >> 21.140 Seals and sealing devicesChina Standard Classification Number:
Chemicals>>Rubber Products and Auxiliary Materials>>G43 Rubber Seals
alternative situation:
HG 4-1568-1985
Release date:
1994-12-22Review date:
2004-10-14Drafting Organization:
Northwest Rubber Products Research Institute of the Ministry of Chemical IndustryFocal point Organization:
National Technical Committee on Rubber and Rubber Products StandardizationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Petroleum and Chemical Industry Association
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the appearance quality requirements for reciprocating rubber seals and their compression rings, support rings and retaining rings. This standard applies to the appearance quality of rubber seals and their compression rings, support rings and retaining rings used for sealing the piston and piston rod of hydraulic cylinders. GB/T 15325-1994 Appearance Quality of Reciprocating Rubber Seals GB/T15325-1994 Standard Download Decompression Password: www.bzxz.net
- Recommended standards
- SY/T 5542-2000 Analysis methods for physical properties of formation crude oil
- QB/T 2545-2002 Eucalyptus oil with 80% cineole content
- FZ/T 92018-2001 Flat steel ring
- GB/T 15054.3-1994 Basic dimensions of small threads
- HG/T 2129.22-1991 Flange-type right-angle equal-diameter cross for chemical equipment parts made of acid-resistant phenolic plastics
- JB/T 5145.3-1991 Test methods for oil-injected screw single-stage refrigeration compression condensing units
- GB 4406-1984 Seed potatoes
- LS/T 1704.2-2004 Classification and codes of grain information—Grain inspection—Part 2:Classification and codes for standard of grain quality
- JB/T 7047-1999 Rolling bearings - Deep groove ball bearings - Vibration (acceleration) technical requirements
- JGJ 25-2000 Archives Building Design Code
- JB/T 1473-2000 Technical requirements for large AC three-phase synchronous motors for mining mills
- JB/T 6684-1993 Clearance range on agricultural implements connected by three-point hitch
- GB 50198-1994 Civilian closed-circuit television system engineering technical specification
- JB/T 6982-1993 Acoustics - Criteria for measurement and evaluation of noise exposure in working environments
- HG/T 3537-1999 Water treatment agent Hydroxyethylidene diphosphonic acid
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com