JB/T 3773.1-1999 Basic parameters of pallet trucks

JB/T 3773.1-1999 This standard is a revision of JB 3773.1-84 "Basic Parameters of Pallet Trucks". During the revision, only editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard applies to low-lift pallet trucks powered by batteries and motors. This standard was first issued on October 12, 1984. JB/T 3773.1-1999 Basic Parameters of Pallet Trucks JB/T3773.1-1999 Standard download decompression password: www.bzxz.net

ICS53.060
Machinery Industry Standard of the People's Republic of China
JB/T3773.1-1999
Pallet trucks
Basic parameters
Pallet trucksBasic parameters
Published on 1999-06-28
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T3773.1-1999
This standard is a revision of JB3773.1-84 "Basic parameters of pallet trucks". During the revision, the original standard was edited and the main technical content remained unchanged.
This standard replaces JB3773.1-84 from the date of implementation. This standard is proposed and managed by Beijing Hoisting and Conveying Machinery Research Institute. Drafting unit of this standard: Beijing Hoisting and Conveying Machinery Research Institute. The main drafters of this standard are Su Enyi and Zhang Jingxiang. 1
Machinery Industry Standard of the People's Republic of China
Basic parameters
Pallet trucks
Pallet trucksBasic parametersJB/T3773.1-1999
Replaces JB3773.1-84
This standard applies to pallet trucks with low lifting height powered by batteries and motors (hereinafter referred to as pallet trucks). 2 Model
Marking example:
The improvement code is represented by A, B, C in sequence
Operation mode code: B for walking, Z for standing, and no code for seated type. t
Electric pallet truck code
The rated lifting capacity of the first improvement is 2t, and the pedestrian-operated pallet truck is marked as: Pallet truck CBD2BAJB/T3773—19993 Basic parameters and dimensions
The basic parameters and dimensions of pallet trucks shall comply with the provisions of Figures 1, 2 and Table 1. Approved by the State Bureau of Machinery Industry on June 28, 1999, and implemented on January 1, 2000
JB/T 3773.1—1999
Manipulation mode
Rated lifting capacity
Maximum lifting capacity of forks
Minimum height of forks
Fork length L
Full width of forks
Lifting capacity of forks per press of the hand oil pump
Time for maximum lifting capacity
Maximum driving speed without load
Maximum driving speed with full load
Minimum outer turning radius
Rated battery voltage
mm/time
JB/T 3773.1—1999
≤1400
1The dimensions in brackets are only for old products. 1.5
≤1500
2 Fork length 1200mm corresponds to the minimum outer turning radius in the table. 2
530(520)690
24，48
3 Fork length should preferably adopt the values ​​in the table,
According to needs, it can also be selected from the following values: 800.bzxz.net
1000，
≤1700
1600mm
Mechanical Industry Standard
Basic Parameters of Pallet Truck
JB/T3773.11999
Published by the Mechanical Science Research Institute
Mechanical Science Research Institute Printed by the Institute
(No. 2 Shouti South Road, Beijing, Postal Code 100044)*
Format 880×1230
K Number of words xxX,xxx
Sheet X/X
Printed in XX month, 19XX
Edition X in XX month, 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
Mechanical Industry Standard Service Network: http/AvwwJB.ac.cn666
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.