
GB/T 15286-1994 General specification for terminal fittings
time:
2024-08-08 22:43:48
- GB/T 15286-1994
- in force
Standard ID:
GB/T 15286-1994
Standard Name:
General specification for terminal fittings
Chinese Name:
端接件总规范
Standard category:
National Standard (GB)
-
Date of Release:
1994-01-02 -
Date of Implementation:
1995-07-01
Standard ICS number:
Electronics >> 31.020 Electronic Components GeneralChina Standard Classification Number:
Electronic Components & Information Technology >> Electronic Components >> L24 Installation, Wiring Connectors
Release date:
1994-12-06Review date:
2004-10-14Drafting Organization:
Shanghai Radio Factory No.9Focal point Organization:
National Technical Committee for Standardization of Electromechanical Components for Electronic EquipmentPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Information Industry (Electronics)

Skip to download
Summary:
This standard specifies the types, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of terminal parts. This standard applies to terminal parts that are connected by solderless crimping with stranded wires with a cross-sectional area of 0.05 to 10 mm2 or hard wires with a diameter of 0.25 to 3.6 mm and non-insulated or pre-insulated crimping barrels. This standard should be used together with the relevant detailed specifications. When this standard is inconsistent with the detailed specifications, the provisions of the detailed specifications shall prevail. This standard does not apply to contacts installed on insulating substrates. GB/T 15286-1994 General specification for terminal parts GB/T15286-1994 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG/T 21569.2-1995 Stirring transmission device--Block type elastic coupling
- JB/T 9069-2000 Roof ventilator
- JB/T 2777-1992 PN16.0~32.0MPa non-porous lens pad
- GB/T 39551.5-2020 Patent navigation guide—Part 5:Research and development
- JB/T 8815-1998 Technical requirements for zinc-aluminum alloy bushings for construction machinery
- JB/T 7919.1-1999 Rolling bearing accessories withdrawal bushing
- JB/T 6457.1-2004 Small valve-regulated sealed lead-acid batteries Part 1: Product classification
- GB/T 8749-1988 High-quality carbon structural steel hot-rolled strip
- JB/T 7766.1-1999 Technical requirements for finger wheel rakes
- GB/T 15755-1995 Calculation and selection of tapered interference fit
- CB/T 3007-2000 Marine hydraulic sliding watertight door
- GB/T 3763-1983 Hexagonal thin nuts for ferrule type pipe fittings
- GB/T 27857-2011 Chemicals—Anaerobic biodegradability of organic compounds in digested sludge—By measurement of gas production
- GB/T 18087-2000 Plant quarantine--Methods for inspection and identification on Khapra Beetle (Trogoderma granarium Everts)
- GB/T 3103.2-1982 Fastener tolerances Bolts, screws and nuts for precision machinery
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com