GB 3735.2-1983 Compression-type straight-through long connector
time:
2024-08-10 20:34:10
- GB 3735.2-1983
- Abolished
Standard ID:
GB 3735.2-1983
Standard Name:
Compression-type straight-through long connector
Chinese Name:
卡套式端直通长接头体
Standard category:
National Standard (GB)
-
Date of Release:
1983-06-17 -
Date of Implementation:
1984-04-01 -
Date of Expiration:
2008-11-01
Standard ICS number:
21.060.60;China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
Replaced JB 1964-1977; replaced by GB/T 3735-2008
Release date:
1983-06-17Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Pipe AccessoriesPublishing Department:
China Machinery Industry FederationCompetent Authority:
China Machinery Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
GB 3735.2-1983 Compression-type straight-through long connector body GB3735.2-1983 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
National Standard of the People's Republic of China
Straight thread long connector-BodyL
Marking example:
Nominal pressure| level, tube outer diameter D, 14mm ferrule end straight long connector body: connector J14GB3735.2-83
National Bureau of Standards 1983-06-17 Issued
UDC 621.643.4
GB3735.2-83
Implementation on 1984-04-01
Nominal pressure
Tube outer diameter
M14× 1.5
M18× 1.5
M27×2
M33×2
M42×2
(M48×2
M50×2
M12 ×1.5
M18 ×1.5
M22 ×1.5
M27×2
M33×2
Note: ①The dimensions in brackets in column d are only for old products. GB 3735.2—83
②The weight is calculated value, and the specific gravity is 7.85kg/dm. The technical conditions are in accordance with GB3765—83. d
M10×1www.bzxz.net
M12×1.25
M16 ×1,5
M18 × 1.5
M 2U ×1. 5
M27 ×1. 5
M30×2
M33×2
M36×2
M42 *2
M45×2
M48 ×2
M52 ×2
M14 ×1.5
M18 ×1.5
M 20 ×1.5
M24 ×1.5
M27 ×1.5
M3× 2
M33×2
M36×2
M39 ×2
Limit deviation
Nominal small
Nominal ruler
Limit deviation
GB 3735.2—83
Limit deviation of displacement size
(kg/100 pieces)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Straight thread long connector-BodyL
Marking example:
Nominal pressure| level, tube outer diameter D, 14mm ferrule end straight long connector body: connector J14GB3735.2-83
National Bureau of Standards 1983-06-17 Issued
UDC 621.643.4
GB3735.2-83
Implementation on 1984-04-01
Nominal pressure
Tube outer diameter
M14× 1.5
M18× 1.5
M27×2
M33×2
M42×2
(M48×2
M50×2
M12 ×1.5
M18 ×1.5
M22 ×1.5
M27×2
M33×2
Note: ①The dimensions in brackets in column d are only for old products. GB 3735.2—83
②The weight is calculated value, and the specific gravity is 7.85kg/dm. The technical conditions are in accordance with GB3765—83. d
M10×1www.bzxz.net
M12×1.25
M16 ×1,5
M18 × 1.5
M 2U ×1. 5
M27 ×1. 5
M30×2
M33×2
M36×2
M42 *2
M45×2
M48 ×2
M52 ×2
M14 ×1.5
M18 ×1.5
M 20 ×1.5
M24 ×1.5
M27 ×1.5
M3× 2
M33×2
M36×2
M39 ×2
Limit deviation
Nominal small
Nominal ruler
Limit deviation
GB 3735.2—83
Limit deviation of displacement size
(kg/100 pieces)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 14954-1994 Brass wire
- GBZ 37-2002 Diagnostic criteria for occupational chronic lead poisoning
- JB/T 7565-1999 Technical requirements for YB2 series flameproof three-phase asynchronous motors (frame size 63-355)
- CB/T 3177-1994 Rules for radiographic and ultrasonic inspection of ship steel welds
- GA 432-2003 Printing Industry Public Security Management Information System Database Specification
- JB 20001-2003 Large volume injection, small volume injection sterilizer
- JB/T 50103-1998 Specification for reliability assessment of general purpose bridge cranes
- CB 1319-1998 Torpedo and mine assembly inspection procedures
- JB/T 8491.4-1996 Technical conditions for heat treatment of machine tool parts - Carburizing and carbonitriding, quenching and tempering
- JB/T 6022.2-1992 Test methods for voltage regulators for magneto motors
- BB/T 0025-2004 30/25mm plastic pilferproof closure
- JB/T 50195-2000 Product reliability assessment method for small flour processing equipment
- HG 20622-1997 Steel pipe flange cover (American system)
- NY/T 1548-2007 Agricultural Technology Extensionist (Aquaculture)
- GB/T 15534-1995 Information processing system database language NDL
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com