GB 5196-1985 Color marking for rope identification

This standard is a unified regulation for the color marking used to identify the constituent materials of ropes. It is applicable to Manila and sisal ropes and polyamide, polyester, polyethylene and polypropylene synthetic fiber ropes with a given minimum diameter of 4 mm or more. This standard refers to the international standard ISO 4877-1980 "Ropes - Color marking for identification". GB 5196-1985 Color marking for rope identification GB5196-1985 Standard download decompression password: www.bzxz.net

Scope of application
National Standard of the People's Republic of China
Color marking for identification
Ropes and cordage-Colourbzxz.net
code for identification
UDC 677.71 : 62
.777.6
GB 5196 --85
This standard is a unified regulation for the color marking used to identify the constituent materials of ropes. It is applicable to Manila and sisal ropes with a given minimum diameter of 4 mm or more and polyamide, polyester, polyethylene, polypropylene synthetic fiber ropes. This standard refers to the international standard ISO4877-1980 "Ropes-Color marking for identification". 2 Principle
The specified color rope yarn is placed in the rope strands, or the whole rope is dyed with the specified color. Color marking
The constituent materials of the rope and the color of the identification mark are specified in the following table. Material
Manila hemp
Special superior grade
Sisal hemp
Polyamide
Polyethylene
Polypropylene
Identification Material Color
Green*
Three strands each have a black yarn
Two strands each have a black yarn
One strand has a black yarn
One strand has a red yarn
One strand has a green yarn
One strand has a blue yarn
One strand has an orange yarn or the whole rope is orangeOne strand has a brown yarn or the whole rope is brownChoose light green (for polyamide) and dark blue (for polyester) to avoid confusion between the two colors. Additional Notes:
This standard is proposed by the Ministry of Textile Industry of the People's Republic of China and is under the jurisdiction of the Textile Science Research Institute of the Ministry of Textile Industry. This standard was drafted by Shanghai Wire and Ribbon Industry Company. The main drafters of this standard are Zhou Xiangshu, Shao Ruinian and Xia Qinfang. Issued by the National Bureau of Standards on May 13, 1985
Implemented on March 1, 1986
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.