CB/T 3818-1999 Rigging turnbuckle

CB/T 3818-1999 Rigging Turnbuckle CB/T3818-1999 Standard download decompression password: www.bzxz.net

ICS47.020.40
Registration No.: 2916—1999
Ship Industry Standard of the People's Republic of China
CB/T3818-1999
Turnbuckle for rigging
Published on April 30, 1999
China State Shipbuilding Corporation
Implemented on August 1, 1999
CB/T3818—1999
This standard is a revision and merger of GB561-65 "Types and sizes of turnbuckles for open rigging for ships", GB562-65 "Types and sizes of turnbuckles for closed rigging for ships", GB563-65 "Types and sizes of turnbuckles for rotating rigging for ships" and GB564-65 "Technical conditions for turnbuckles for ship rigging".
The original standard is too old and the strength level is not matched, which cannot meet the selection requirements of various types of ships. This revision expands the scope of application and the selection of materials, establishes 11 types and 19 specifications, and gives the safe working load of the strength level of the turnbuckle to meet the matching of various ships.
From the date of implementation, this standard will replace GB561-65, GB562-65, GB563-65, and GB564-65. This standard is proposed by the National Technical Committee for Ship Equipment Standardization. This standard is under the jurisdiction of Jiangnan Shipyard (Group) Co., Ltd. The drafting unit of this standard: China Shipbuilding. The main drafters of this standard: Li Fuchang and Song Ren.
1 Scope
Ship Industry Standard of the People's Republic of China
Turnbuckle for rigging
CB/T3818-1999
Classification number: U24
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging and transportation of turnbuckles for rigging (hereinafter referred to as turnbuckles).
This standard applies to shipboard lifting components, lifeboat davit accessories (hereinafter referred to as lifesaving), and turnbuckles for lashing and fastening. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB6388-86 Shipping and receiving marks for transport packaging
GB9799—88 Metal covering layer Zinc electroplating on steel GB12362-90 Tolerances and machining allowances for steel die forgings GB/T13384—92
General technical conditions for packaging of electromechanical products
3 Product classification
3.1 See Table 1 for the types of turnbuckles.
Approved by China State Shipbuilding Corporation on April 30, 1999 and implemented on August 1, 1999
Open rigging turnbuckle
Rotary rigging turnbuckle
Screw type
CB/T3818-1999
Type of turnbuckle
Screw sleeve type
Specifications and parameters of turnbuckle are shown in Table 2.
CB/T3818-1999
Specifications and parameters of turnbuckle
Screw diameter
Safe working load|| tt||Minimum breaking load
Lifting, lashing
Note: The strength calculation of this standard for lifting and lashing is based on [0]-; lifesaving is based on [0]-0P level
Safe working load
Lifting, lashing
Minimum breaking load
3.3 Structural type and basic dimensions of turnbuckles CB/T3
3818-1999
3.3.1 The structural type and basic dimensions of KUUD and KUUH turnbuckles are shown in Figure 1 and Table 3.5
KUUD type
KUUH type
1-die forged spiral sleeve; 2-U-shaped left screw; 3-U-shaped right screw: 4-locking nut; 5-plain straight pin: 6-cotter pin; 7-welded spiral sleeve Figure 1 KUUD type and KUUH type turnbuckles
Table 3 Basic dimensions of KUUD type and KUUH type turnbuckles Screw diameter d
Maximum steel cable
155/230
210/325
230/340
280/420
295/435| |tt||335/525
375/540
420/605
445/630
505/720
545/755
635/880
65 0/900
720/985
760/1025
845/1135
870/1160
940/1250
975/1280
CB/T 3818-1999
The structural types and basic dimensions of KOOD and KOOH turnbuckles are shown in Figure 2 and Table 4. 3.3.2
KOOD type
KOOH type
1-Die forging spiral sleeve: 2-0-shaped left screw: 3-0-shaped right screw: 4-locking nut; 5-welded spiral sleeve Figure 2 KOOD and KOOH turnbuckles
Basic dimensions of KOOD and KOOH turnbuckles Table 4
Screw diameter
Maximum steel cable
170/245
230/345
255/365
310 /450
325/465
390/560
415/580
470/655
495/680
575/785
610/820
700/950
730/975
820/1085
855/1120
940/1230
970/1260
1085/1390
1130/1435
CB/T3818-1999||t t||3.3.3 The structural types and basic dimensions of KOUD and KOUH coal turnbuckles are shown in Figure 3 and Table 5.1
KOUD type
KOUH type
1-Die forged spiral sleeve: 2 ()-shaped left screw: 3U-shaped right screw: 4-Fixing nut: 5-Straight pin; 6-Split pin; 7-Welded spiral sleeveFigure 3KOUD and KOUH type turnbuckles
Table 5Basic dimensions of KOUD and KOUH type turnbucklesScrew diameter d
Maximum steel cable
160/235
220/335
240/355
295/435||t t||310/450
375/540
395/560
445/630
470/655
540/775
575/790
665/915
690/940
770/1035
810/1075
890/1180
920/1210
1010/1320bzxz.net
1055/1360
CB/T3818—1999
3.3.4 The structural types and basic dimensions of KCCD, KCUD and KCOD turnbuckles are shown in Figure 4 and Table 6. KCCD type
KCUD type
KCOD type
1-die forged spiral sleeve; 2-C-shaped left screw; 3-C-shaped right screw: 4-debt tightening nut; 5-U-shaped right screw; 6-plain straight pin; 7-cotter pin; 8-0-shaped right screwFigure 4
KCCD type, KCUD type, KCOD type turnbuckleTable 6 Basic dimensions of KCCD type, KCUD type, KCOD type turnbucklesScrew diameter d
KCCD, KCUD, KCOD
Maximum steel cable
160/235
160/235
165/240
250/360230/340
0240/350
250/365
270/385
320/460
330/470
300/440
315/455
390/560
375/545
260/375
315/455
390/560
CB/T3818—1999
3.3.5 The structural type and basic dimensions of ZCUD type turnbuckles are shown in Figure 5 and Table 7. Assembly process: 1-hook; 2-forged sleeve: 3-ring nut: 4-U-type screw; 5-locking nut; 6-cotter pin; 7-straight pin Figure 5 ZCUD type turnbuckle
Basic dimensions of ZCUD type turnbuckle
Screw diameter
Maximum steel cable
185/265
200/285
240/330
300/420
315/440
CB/T3818—1999
3.3.6 The structural type and basic dimensions of ZCUD type turnbuckle are shown in Figure 6 and Table 8. Assembly time
1-fork 2-die forging spiral sleeve; 3-nut: 4-U-type screw; 5-locking nut: 6-light straight pin: 7-cotter pin Figure 6
ZUUD type turnbuckle
screw diameter
maximum steel cable
basic size of ZUUD type turnbuckle
190/270
210/295
245/335
305/425
325/450
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.