JB/T 9163.12-1999 Dimensions of cylindrical gear grinding spindles

JB/T 9163.12-1999 JB/T 9163.12-1999 Dimensions of cylindrical gear grinding spindles JB/T9163.12-1999 Standard download decompression password: www.bzxz.net

ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
JB/T9163.1~9163.20--1999
Fixtures and attachments for gear cutting machine
Fixtures and attachments for gear cutting machine1999-05-20 Issued
State Administration of Machinery Industry
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Cylindrical gear grinding spindles
Fslindricel amlandrels for gear eritding aachigeDimcasieng
JB/T163.12-19
代151607127
This standard specifies the inductive gear type, which is suitable for gears with a fixed distance of 180mm. 2 types and dimensions
Types are specified in the drawings and tables.
Basic size industry
Limited benefits
National Machinery Industry Administration 1999-05-2000 approved 280
Limited information case
MtzkIs
M6×I5
2000-01-01 Actual
Station size
3 mark
Standard example:
Movement limit difference 65
JB/T915312-1999
Table (complete)
Basic and size
Small-4mm, electric mm center ball mark
40×3001B/T9163.121999
Limit difference
..0.050
320×15
M24 × 1.5
M36x15
M42 × 1 5
Grading design and calculation of circular gear grinding spindle
JB/T4163.12-1999
(Prompt record)
Grading design and calculation of gear spindle
Grinding high-precision step wheels requires two inner rails with perfect precision. This spindle should ensure the matching distance of a workpiece hole control. After adding 1 to the same part, the hole diameters are different within the allowable tolerance range. It is recommended to have a side gear spindle to match it to meet the requirement of small spacing. This is in line with the reasonable grading design of the spindle. The following is a set of formulas as a reference for the design of the inner shaft of the graded grinding mill:
) Basic size of the graded core
d s-Po+(t - 1) ×
6) Limit deviation of the graded core
Where: Base size of the lower hole, mm;
41 Filling difference, mm;
1 Mandrel grade number; bZxz.net
· Mandrel grade serial number.
Example: The gear hole grid 3I17 (\.021) milling core is required to be graded. Requirement: Substituting into formula A, we get formula A2:
d1-30+(1 - 1)×
d g0=30+(2 - 1)×
d a20+(3
d sn=30-(4 - 1) x
2 × 4
= - 0.003
The design size of the graded spindle is:
1 30.000%mct
Heavy grade 300G61003
1 grade 30.012Hc3
Line 30.0151c
JB/T9163.12-1999
2 Grinding and rolling, grading heart Can Shichuan line Na hundreds of tables I AI
Heart Chi points the order of special
Type civil size
15 000
.n21.000
.21uus
22 000
23 000
..25 us
Pole inquiry
Applicable workpiece light
Basic rate small
Ball size I6
JB/T9163.12—1099
Table A()
Spindle cable treatment number
30 011
Spindle diameter
Test limit difference
Applicable L. Parts aperture
Limit deviation JT6
R/T 9163.12-1999
Table AI(
Spindle public device number
72 u08
spindle,
extremely accurate
suitable pressure 1 piece
limit reduction [6
JR/T9163.12-1999
Table A1)
spindle classification
spindle width is appropriate here,
80 016
limit deviation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.