GB 18240.3-2003 Tax control cash registers Part 3: Specifications for tax control devices

This part of GB18240 specifies the general requirements, test methods, inspection rules and other related contents of tax controllers that cooperate with the host to realize tax control functions. This part applies to tax controllers that generate, store and transmit tax control data of ordinary invoices, and does not involve anti-counterfeiting tax control systems for special value-added tax invoices, tax control fuel dispensers, and tax control taxi meters. This part applies to the design, production, testing and acceptance of tax controllers, and also provides a basis for product certification. GB 18240.3-2003 Tax Control Cash Register Part 3: Tax Controller Specification GB18240.3-2003 Standard Download Decompression Password: www.bzxz.net

IC5 35. 240. 40
National Standard of the People's Republic of China
GB18240.3—2003
Fiscal cash register-
Part 3:Specification of fiscal controller
Fiscal cash register-
Part 3:Specification of fiscal controllerPromulgated on June 25, 2003
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implementation on October 1, 2003
All technical contents of this part of CB1624C are mandatory. G18210 Yuekong payment collection day is divided into 6 parts: English Part 1: Training equipment specification;
Part 2: IC card specification
Part 5: Good controller specification;
Part 1: Bank card change equipment specification: Part 5: Controller specification
Part 5: Equipment code reduction specification
This part is H1824 Part 3.
This part is the request of A and Xie Jia 3. It is the current standard student supplement , Appendix (is a reference to the information provided by the Ministry of Information Industry of the People's Republic of China and the State Administration of Taxation. This section is issued by the National Information Technology Standardization Technical Committee. This section is composed of the following units: Tax Control Collection Standard Working Group (and the Appendix). H18240.32003
This section is drafted by: Li Wei, Yi Yan, Shang Lian, Zhang Shengli, Li Weimin, Su Zhi, Si Xiaopeng, Yu Jian is, Zuo Luozi, Deng Wu, Yong
GB 18243.3—2003
This part of GB1820 is used as a supplement to Part 1 of this part and is a supplement to various types of tax cash registers. This part cannot exist independently from Part 1. The equipment specified in this part is mainly used in conjunction with the host. 1 Specification
Tax control cash register Part 3, Tax controller specification B1824C,3—2003
This part of GB1640 specifies the general requirements, test methods, inspection rules and other related contents of tax controllers that cooperate with the host to realize the control function.
This part is applicable to the production, sales and transmission of ordinary invoice control data, and is not applicable to the design, production, testing and inspection of special VAT tax control systems, tax control fuel oil machines, and tax control vehicle price controllers. The product certification model is the basis for the collection. 2 Normative references
The following documents become the clauses of this part through reference to this part of CB18340. For any dated reference, all subsequent static documents (without error) or revisions do not apply to this part. However, the parties who have reached an agreement based on this part shall determine whether the latest version of this document can be used. For any undated reference, the latest version shall apply to that part.
B/191-200) Sales and transportation graphic mark (gV19780:197) GB494320! Information technology. New safety (eqVF6C50, 19 H/1107-0 application of data exchange hot condensation terminal equipment and digital circuit terminating equipment interface (dtEIAA232 F)
(R9%4-199% of the total technical proposal for the preparation of the coreless stock value and the measurement method (id: C1SPR22: 1997) G.1 The first part of the product manual is written: the total plan GB/T17616198 uses the total investment technology to collect the resistance batch density limit value and the fastThe MTRF value of the tax controller is constant. It is given by the specific product standard. 4.9 Instructions for use and related documents
The instructions for use of the tax controller shall comply with 6! 1. For the format of the tax controller usage plan and the tax controller requirement list, see Appendix 1 of C1A27, 1-3. 4.10 Equipment modification
For the modification requirements of the cash register and its equipment in Part 5, see the requirements of Part 5. Test methods
5.1 Test environment
Except for the gas environment test and the dielectric strength test required by this part, other tests can be carried out under the following test conditions.
:-5r:--35:
Degree of proof: 45~.75%:
Physical force Pu116kPa
5.2 Functional requirements and interface tests
Through the joint test with the owner and tax control management system, the requirements specified in 1 and 1 shall be tested, and the requirements shall be inspected at the same time.
5.3 Appearance and structure inspection
The appearance and structure inspection shall be carried out by monthly testing method, and shall meet the requirements of 4.2. 5.4 Inspection of other instructions and related documents
The instruction manual, maintenance records and repair records shall be inspected by daily testing method, and shall meet the requirements of 1.1.1. and 1.9. 5.5 Safety test
Carry out according to the relevant provisions of H4945200. 5.6 Power adaptability test For the controllers using AC power supply, the power adaptability test shall be carried out according to the combinations in Table 1, and the tested samples shall be tested: each combination shall be tested in the order, and the tested samples shall work normally. For the controllers using the same power supply, the test shall be carried out in the order in Table 1, and the tested samples shall work normally. The AC power supply shall be within the range of GB18240.3-2003. 5.7 Power adaptability test The DC power supply shall be within the range of GB18240.3-2003. 5.8 of Table 2 shall be followed.
5.8 Environmental testwwW.bzxz.Net
5.9 Reliability test
2001 GB18241.1
5.10 GB1624C.
6 Inspection rules
6.1 General
In the finalization (design finalization, production finalization) and production process, the product must be inspected in accordance with the provisions of this part and product standards, and in accordance with the requirements of various regulations,
6.2 Inspection classification
Production inspection is divided into one category:
Standardized inspection;
Delivery inspection:
Routine inspection,
The various inspection items and titles are listed in Table 3 respectively. Table 3 Inspection items
According to the report items!
Function and environment requirements
External and external medicine
Use training or book and related
According to the addition of work
Gas model environment should be carried out
Machine environment increase Jianghu report
Type inspection
Delivery inspection monitoring
Creation tone
Method: "" indicates that the heart is carried out for all the items to be prepared, \" indicates that the items to be carried out will not be carried out in the month
In the delivery document, the instrument is used for anti-electricity withdrawal business monitoring, and the electricity rate continuity is tested and the method is connected to the electricity maintenance test. 6.3 Type inspection
6.3.1 The product should be tested before the design and completion of the product. Nuclear technology requirements
1.1. 3. 3...0
6.3.2 Type inspection The main production system is carried out by the inspection department of the station or the superior competent department. The number of test samples approved by the manufacturer is determined by the product batch, test training and cost. The number of samples for other inspections is rounded to 2:
C9 18240.3—2003
6.3.4 The failure judgment criteria and calculation method of the reliability test for the finalization shall be as follows: R210.1—2003. The following items shall be tested according to the daily average test; if a failure occurs during the test or a certain item fails, the test shall be stopped, the cause of the failure shall be determined, a failure analysis report shall be submitted, the failure shall be eliminated, and the finalization test shall be repeated. If a failure occurs during the subsequent test or the item fails to pass, the cause of the failure shall be found out, a failure analysis report shall be submitted, the failure shall be eliminated, and the finalization test shall be repeated. 6.3. 5. After the inspection, the inspection report should be submitted. 6.4 Acceptance inspection
6.4.1 Products produced in batches or in succession shall be accepted in batches one by one. If any item fails during the inspection, it can be returned for re-inspection. If any item fails again, the product is considered unqualified. Unqualified products shall be repaired into qualified products before delivery.
6.4.2 Acceptance inspection shall be conducted by the quality inspection department of the product manufacturer: 6.5 Routine inspection
6.5.1 Products produced in batches shall be accepted in batches one by one. Routine inspections shall be conducted on each batch of products. Routine inspections shall be conducted at least once a year. When major designs, processes, related components and raw materials are required, routine inspections shall be conducted. 6.5.2 The quality inspection department of the product manufacturer or the quality inspection unit recognized by the receiving department shall be responsible for the inspection. Upon the requirements of the new product manufacturer, the manufacturer shall provide a recent inspection report. E.5.3 The samples for routine inspection shall be taken from the qualified products delivered for inspection. The number of samples shall be counted before the day after the reliability acceptance. The batch test time of the product shall be 6.5.4 During routine inspection, the test data and calculation data of the test items shall be collected and calculated according to GB18240.120C3 Table 13. The fault handling of other items shall be carried out as follows. If a fault or a minor failure occurs during the inspection, the cause of the fault shall be thoroughly found out, and a fault analysis report shall be issued. After verification, the following re-inspection shall be carried out. If a serious fault occurs again or a certain item fails, a fault analysis report shall be issued after the cause is found out, and the inspection shall be re-performed by the inspection department. During the re-inspection, if the result is: · If an item fails to pass the plan, the product shall not be inspected immediately. During routine inspection, the product shall be scanned by the environment and printed with the mark: "Not recommended as a certified product". 6.5.5 The inspection supervisor shall submit a routine inspection report. Sub-labels, packaging, storage, and storage
7.1 Packaging markings
The packaging should indicate the product model, number, quality mark, production unit name, and product standard box number: the packaging should be printed or affixed with "transportable goods", "upward", "below", "number of stacking layers" or "standard code limit" and other urging signs, and the transportation markings should comply with the provisions of GBT1912:100. 7.2 Packaging
The packaging should comply with the requirements of the Ministry of Health, the Ministry of Transport, and the European Union. The packaging box should have a packing list, inspection certificate, service film, accessories and related documents.| |tt||7.3 Transportation
The products after packing can not be transported by any means. Rain or liquid is not allowed to directly touch the packaging machine during the transportation process.
7.4 Storage
The products should be placed in the packaging box during transportation. The storage environment temperature of the products should be (~10, relative humidity should be 3%~5%). There should be no strong mechanical movement, arc and arc effect in the warehouse. The packaging box should be at least 5m away from the environment, hot and humid. Source, cold source, friction or air inlet less than 5mrm in the production order storage more than eight doors, it should be approved before the delivery of the re-check 5
Center 18240.3-2003
A.1 Connection
Appendix A
(Eight Normative Appendix)
Connection between the tax controller and the host
The host transmits the relevant data to the tax controller, and the controller generates the tax control code and other information. The host prints the invoice according to the refund information or makes other certificates
Only the complete return of the tax according to the alliance is After the total number of letters, the small can open the door to issue invoices. A.2 Communication protocol
Tax control needs to be carried out according to the protocol of the upper host to communicate as follows; send the mountain communication calculation rate as 100! 65/number of deductions, 1 start position 1 existence, large verification officer, the return time is not more than 33 to 30 minutes of the life of the person in Shenzhen time. If the invoice can be printed within 30 days, the host will return a "request to continue waiting" command.
Tax control needs to be communicated through the upper host to exchange teaching plans, which can adopt four types of methods: isochronous transmission method, middle position editing method, batch good ball gram method, and digging auxiliary treatment method. A,3 Communication Commands
Allows the host to communicate with the controller using the "command-response" function. The host is the effector and the controller is the receiver. The host sends a command and the controller responds.
A, 3.1 Command Format
The command format is shown in Table 4.1.
Table 4.1 Command format
Start the request
Do not verify the machine's request
Promise to request F data packet
Please continue to study
Cx1·0x10+study+number group package·life length: price command effect)(S\\length
\R\1x length chain type
"command to push the micro data packet
\W\x·command QK·CE
Department command salary format in the special service effect W.G151K243:2003 Appendix.:.3, "9\High school students in a request to execute the test\In the middle, "number" is a decimal number of the morning festival, when "effect index sequence" is the number of the number of symptoms package to stop this certificate last creation Data,
"small attached fast marketing request bottom zero"\"clean setting type code" is 1 Ningjie: hexadecimal number three times special A, 2, command request command data is divided into multiple ports - make a long command with the same title \please send a number of packets "command, then send a packet immediately, from the actual receiving period of the stimulation science also "please times - the whole packet "processing time should not be too large: many, under the appropriate request, the number of packets "efforts, "received state data packet sequence number" is 1 hexadecimal rate also caused, when the tax controller internal situation request time is greater than the type of ticket validity data and command "in K high main return a "request" command
A.3.2 interface command
tax controller according to the market today integrated position contains the following basic combination, tax heater manufacturers can also add other commands according to actual needs A. 3.2. 1 Online
Request command format:
x11,x00|packet number command length 15F confirm execution request response, *K\—0x00-0x04+CS cannot execute the request: "FR\+Ox00 command length error type code+SCH18240.3—2G3
Function description Before testing with the host and the device, make sure that the application interface provided by the device is open, and set a certain communication rate to make sure that both parties can communicate. If the connection is successful, you can perform other subsequent communication commands: Generate and execute When executing the post-cut command, no online selection is performed.
A.3.2.2 Tax controller initialization
The command format is 0x1B-x0+3+data packet number+command length. Please execute the command correctly. Please specify "K\data packet number, command length "(5). The response is: +0+command length+wrong reading of vehicle class code+function specification: After the tax receives this command, with the cooperation of the tax control card and the user card, the tax belt is initialized. The operation steps are as follows:
The tax control is in the process of entering the tax controller, and then the tax controller sends the tax controller initialization command. Tax control When the tax controller receives the command, it determines that the tax controller needs to perform the initialization. If the initialization is not completed, it will not be able to request an answer from it and will exit the initialization. The controller will follow the steps in Section 5.1 of 5:9210.2-3003 and read the required file number from the user F. After the tax controller completes the initialization correctly, it will return to the host with the requested results. If the controller cannot continue to execute the request during the initialization, it will also return the request without executing the request. The operation is deactivated and initialized. <.3.2.3 Distribute invoice number
request command format: 0x11+x10+data packet number 1 command length 1S correct response to the request "(K)" + data packet number + command length + invoice code + single invoice starting number + single invoice number
incorrect response to the request, \ER\ + C+command related language + type code - "can only be described:
) After receiving this command, the invoice number in the distribution card will be used, and the distributed invoice number will be uploaded to the main board. b) This command will be executed to distribute the invoice. cF specific data format and analysis definition according to GB1324 (.2-3 in.1 Table 78A.3.2.2 Distributed invoice number upload
request format: B1 upper number package serial number command length ten correct execution request should be: \OK\ ten data packet bed number one command length ten distributed but this other with the invoice number √ ten V (invoice code one China Hong Kong issue system start number single issue end number: one heart S cannot report the South request should be: \FR\ ten heart ten command length one wrong type code |CS dynamic description connection:
a) tax controller receives this command, will! ! Distributed but technical students use the same invoice number to the network host. Distributed but not used four issue of coupon activation _F hexadecimal number) with valid data format and related support service (certificate 1, 2-2031..6 table 5A.3.2.5 current invoice number upload
request command format 3x1B-0x10+0x5 ten full package sequence number one command length +5 small confirmation request should be executed, (\K\ ten data sequence number one command length ten and the previous required number one [not the same as the execution request result: ER\+(x(ten command length one error type code S reverse description:
GB18240.3—2003
) The command is used to confirm the invoice number before the full ticket is issued. The tax controller receives the command After the command, the current invoice number is passed to.
b》Tax control device will increase from small to large and then use the invoice for the relevant card promotion. A, 3.2.5 Open normal invoice review command
request command format: 0x1B + 0x:0 + 0**4 + data packet number 1 command length standard ten account number ten inch payment unit ten business item date effective ten (product name (business top) + micro (specification) one tax type tax date request number one amount) ten correct hot request should be: "(K" + data packet number 1 command length 1 device number taxpayer name | tax number 1 invoice tax control period time 5
cannot be machine-operated request and so on: \HR\ + OO + stealing command length seat error Type code + S function,
! After receiving this command, the tax controller will conduct a legal check on the invoice and the distribution: 1) The tax controller will operate according to 5.2 in (B18240.220C3). The tax controller will save the invoice and update the system. After that, it will return the "correct response to the request" to the host. The host can only print the invoice after receiving the "correct response to the request" from the tax controller. The content of the printed invoice should be consistent with the invoice data stored in the controller. +) The number of corrected items is: a hexadecimal number of bytes. Other numbers can be in accordance with Table A in GB140.12003. 5.
4.3.2.7 Refund command
Use the command format or: 01R+1x1+0x33+data sequence number L command will be returned invoice number 1 account number 1 payment unit 1 business item month effective 4N+(product name (date)+number plate (specification)+tax type and tax date+request number+gold version CS correct header calculation request should be: "heart water\+data package number+command length+machine shortened+add skin person name+tax guide+invoice tax control pregnancy, yuan system gate period yuan fee time+S
Cannot pay the next time please check the quantity: ER\+x+command length+error type code+CS function cat operation: the coal flow is consistent with A..2.3, 4.3.2.8 terminal command
clear request command format, x11 heart lC,>6 data packet number command length one send recruitment print number one s correct method to execute the requested special "OK\ ten data packet character guide ten command length ten S cannot be completed: R" ·x 1 command length is full error type agent ten LS function description
1) The tax controller receives this enterprise in the future, and will perform a legality check on the invoice print number. 1) The tax controller operates according to CT132.2-20G3.2: A3.2.9 Machine factory data upload
Request format: 0×1:-×13+0 ...10 User information || tt || call request command format: 1B10x10: data number command length 1CS worker confirms the execution request response love ">K"" number of period package sequence number command length ten use wide forget S hot request response signature "E\ one command length 8 ten error type code +3 dynamic energy description: after receiving this command, the control will send the user information point to the host worker: user estimate format see GT 13320, 1-2 center 3 Appendix 4 Table A, 2,S
A,3.2.11 Tax type and tax item information upload
GH18240.3-2C03
Request command format: 0x-B-Ux1U-(x39+packet sequence number+command length+(SCorrect request response, "CK\+packet sequence number+command length"+type record~N+N, tax type and tax item information+s
Cannot execute the request response: "ER" 0x00-command length+wrong type code-S Function description:
a) After the tax controller receives this command, the tax type and tax item information in the tax controller will be given. b) The number of tax type and tax item records is a ten-digit decimal number. For the format of the tax type and tax item information, see Table A.3 in Appendix A of 318240.1-20(S.,3.2.12 Date and time
request format: 1T10x[G1Ux3A—data packet number + command length S is confirmed, "K" + data packet sequence number - command length + date and time cannot be met\ poem request response, "ER\ + \x0\ + command length | error type code + S Function:
The controller receives the command and transmits the current date and time of the controller to the host: The format of the date and time is CCYYMMDDHHMM, expressed in BCD code. For example: 200: 3H20 14:00:00, expressed as 3U03(314G
A.3.2.13 Set time
request command format: 2x1+(x101U3B+data sequence number 1 command length + time + CS The response to the request is: \OK\-data packet number-command length·(S) The response to the request that cannot be executed: "ER\+000+command length+error type code+CS functional description. The clock of the tax controller is calibrated at the factory and is calibrated again during initialization. After initialization, the clock of the tax controller can only be charged after being authorized by the tax authority.
A.3.2.14 Single voucher invoice usage summary data upload request command format: 0xIB+0xCxC+data packet number+command length1invoice number-CS The response to the request that can be executed correctly: \K\+data packet number+command length+single voucher invoice usage summary data+[The response to the request that cannot be executed is: "ER"CxC+command length+error type code+" functional description,
a) After the tax controller receives this command: it will specify the number to send the summary data upload request The total data of the invoice volume is uploaded to the host. For the single-volume invoice, the total data format is shown in Table A.4.A.3.2 in Appendix A of GR1824(1-2C67). 15 Declaration data and invoice printing data write card request command format, 0x1·0x10: 0x3D-data package number-command length + report end date 1 (5) Correct execution of the request should wait \OK\+data package sequence + command length + (\S) Cannot execute the request: "ER\-0kM-command K-length 1 with transmission type code - S Function description:
: The tax controller receives this command and judges that the "spray group flag" in the control card is set. When the "detail flag" in the general tax card is not set, it will write the report data to the user 1 card. The operation process is shown in 5.3 of GB1830,2-2003. 10,000) When the "detailed flag bit" in the tax control is set, the tax controller will record the interim report data and part of the invoice printing data (invoice period, invoice number, invoice type, total invoice amount, segment control code, invoice number, CB18720, 1-2003 A table A.5) 10,000 user cards, see (P-210.22003 5.4) Interim report number [1 period is the previous interim report period (the first interim report period is the conversion period),
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.