QB/T 2212.12-1996 Construction tools (brick and mortar) Trapezoidal spade

This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of trapezoidal masonry shovels. This standard applies to the No. 303 trapezoidal masonry shovel specified in QB/T 2212.1 "Terms of Construction Tools (Masonry)". QB/T 2212.12-1996 Construction Tools (Masonry) Trapezoidal Masonry Shovel QB/T2212.12-1996 Standard download decompression password: www.bzxz.net

QB/T2212.12--1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBI47001-1985 "Terms of Construction (Masonry) Tools", ZBJ47002--1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into light industry standards. In the overall structure of the standard, the terminology, general technical conditions and product standards of construction tools are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" are cancelled, and some of its relevant provisions are merged into the general technical conditions. The product standards are retained according to the numbers in the terms, and a "Diamond Grinding Shovel" product standard is added. This standard changes the word "bricks and tiles" in the original name brackets to "bricks and tiles", and puts it behind the standard name "construction tools", so that the hand tools used in construction operations are more standardized, and a clear limitation is made in the scope of application. This standard is a supporting standard, and the terms and general technical conditions are based on it. The technical content in the original standard that has been proven to be suitable for my country's situation in practice is retained. The main dimensions in the product standard have been optimized, several specifications have been added, and the limit deviation has been indicated. This standard has modified and improved some quality indicators.
From the date of implementation of this standard, ZBJ47001~47003-1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is promoted by the National Tool Hardware Standardization Center. The drafting units of this standard: Shanghai Tool Industry Research Institute, Jiazhuang Gongnongtao Machinery Factory, Dalian Housing Equipment Tool General Factory, Shanghai Fengzi Tool Sanguang, etc.
The main drafters of this standard: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool Hardware Standardization Center for interpretation. 617
Light Industry Standard of the People's Republic of China
Construction Tools (Brick and Brick Category)
Trapezoidal Masonry Shovel
QB/T 2212.12--1996
This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of trapezoidal masonry shovels. This standard applies to the No. 303 trapezoidal masonry shovel specified in QB/T2212.1 "Terms of Construction Tools (Brick and Brick Category)". 2
Cited Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. QB/T2212.1—1996 Terminology of Construction Tools (Masonry Tools) QB/T2212.2--1996
Construction Tools (Masonry Tools)
3 Product Classification
The type of the trapezoidal masonry shovel is shown in Figure 1.
3.2 Main Dimensions
The main dimensions of the trapezoidal masonry shovel shall be as specified in Table 1. Approved by China Light Industry General Association on March 22, 1996
General technical conditions
Implemented on December 1, 1996
KAONKAca-
Shovel length L
125,130
150,155
175,180
200,205
225,230
250,255
Limit deviationWww.bzxZ.net
QB/T 2212.12—1996
Table 1 Main dimensions
Shovel width B
100,105
105,100
125,130
Note: Special types and other dimensions may not be limited by this table. 4 Technical requirements
The technical requirements for trapezoidal masonry shovels shall comply with the provisions of Chapter 4 of QB/T2212.2--1996. 5 Test methods
5.1 Dimension inspection
Measured with universal measuring tools.
5.2 Inspection of other items
Carry out in accordance with the provisions of Chapter 5 of QB/T2212.2—1996. 6 Inspection rules
In accordance with the provisions of Chapter 6 of QB/T2212.2—1996. 7 Packaging, marking, transportation, storage
According to the provisions of Chapter 7 of QB/T2212.2--1996. Limit deviation
Shovel thickness
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.