GB/T 9104.8-1988 Test method for industrial stearic acid - Determination of ash content
time:
2024-08-10 01:11:44
- GB/T 9104.8-1988
- Abolished
Standard ID:
GB/T 9104.8-1988
Standard Name:
Test method for industrial stearic acid - Determination of ash content
Chinese Name:
工业硬脂酸试验方法 灰分的测定
Standard category:
National Standard (GB)
-
Date of Release:
1988-04-30 -
Date of Implementation:
1988-10-01 -
Date of Expiration:
2008-12-01
Standard ICS number:
Chemical Technology>>Organic Chemistry>>71.080.40 Organic AcidChina Standard Classification Number:
Chemicals>>Organic Chemical Raw Materials>>G17 General Organic Chemical Raw Materials
alternative situation:
Replaced by GB/T 9104-2008Procurement status:
≈ISO 5466-80
Release date:
1988-04-30Review date:
2004-10-14Drafting Organization:
Daily Chemical Research Institute of the Ministry of Light IndustryFocal point Organization:
National Technical Committee on Standardization of Surfactants and DetergentsPublishing Department:
China Light Industry FederationCompetent Authority:
China Light Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
GB/T 9104.8-1988 Test method for industrial stearic acid - Determination of ash content GB/T9104.8-1988 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
National Standard of the People's Republic of China
Test methods for industrial stearic acids--Determination of ash
1 Subject content and scope of application
This standard specifies the method for the determination of ash in industrial stearic acid. UDC 668.1.012
：543.06
GB 9104.8—88
This standard applies to the determination of ash in industrial stearic acid produced by pressing or distillation after hydrolysis of animal and vegetable fats. 2 Apparatus
2.1 Porcelain crucible 50mL.
2.2 Dryer.
2.3 High temperature electric furnace
3 Test procedure
It can be heated to at least 1000℃.
Accurately weigh about 10 samples into the porcelain that has been burned to constant weight, heat it on an electric furnace and ignite it to completely carbonize it. Then move it into a high-temperature furnace at 800-850℃, burn it into grayish white (about 0.5h), move it to a dryer to cool for 1.5h, weigh 4 results and calculate
where A
ash content, %
ash content and the mass of the porcelain crucible, g, bZxz.net
the mass of the empty porcelain crucible, 8,
the mass of a sample, 8.
The allowable error of the parallel test results is 0.005%. Additional remarks:
This standard is proposed by the Ministry of Light Industry of the People's Republic of China. m
This standard is under the technical jurisdiction of the Daily Chemical Industry Science Research Institute of the Ministry of Light Industry. This standard is drafted by the Daily Chemical Industry Science Research Institute of the Ministry of Light Industry. This standard is equivalent to the determination of ash content in Japanese Industrial Standard JISK 3331 "Industrial Hardened Oil Fatty Acids". Approved by the Ministry of Light Industry of the People's Republic of China on April 30, 1988 and implemented on October 1, 1988
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Test methods for industrial stearic acids--Determination of ash
1 Subject content and scope of application
This standard specifies the method for the determination of ash in industrial stearic acid. UDC 668.1.012
：543.06
GB 9104.8—88
This standard applies to the determination of ash in industrial stearic acid produced by pressing or distillation after hydrolysis of animal and vegetable fats. 2 Apparatus
2.1 Porcelain crucible 50mL.
2.2 Dryer.
2.3 High temperature electric furnace
3 Test procedure
It can be heated to at least 1000℃.
Accurately weigh about 10 samples into the porcelain that has been burned to constant weight, heat it on an electric furnace and ignite it to completely carbonize it. Then move it into a high-temperature furnace at 800-850℃, burn it into grayish white (about 0.5h), move it to a dryer to cool for 1.5h, weigh 4 results and calculate
where A
ash content, %
ash content and the mass of the porcelain crucible, g, bZxz.net
the mass of the empty porcelain crucible, 8,
the mass of a sample, 8.
The allowable error of the parallel test results is 0.005%. Additional remarks:
This standard is proposed by the Ministry of Light Industry of the People's Republic of China. m
This standard is under the technical jurisdiction of the Daily Chemical Industry Science Research Institute of the Ministry of Light Industry. This standard is drafted by the Daily Chemical Industry Science Research Institute of the Ministry of Light Industry. This standard is equivalent to the determination of ash content in Japanese Industrial Standard JISK 3331 "Industrial Hardened Oil Fatty Acids". Approved by the Ministry of Light Industry of the People's Republic of China on April 30, 1988 and implemented on October 1, 1988
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 2230-1991 Water treatment agent dodecyl dimethyl benzyl ammonium chloride
- HG/T 2959-2000 Industrial hydrated basic magnesium carbonate
- HG 21589.2-1995 Translucent glass plate liquid level gauge (PN6.3)
- GB/T 32065.10-2020 Environmental test methods for oceanographic instruments—Part 10:Salt fog test
- GB/T 4910-1985 Tinned round copper wire
- GB/T 39450-2020 Credit evaluation index of commercial and trade circulation enterprise
- GB/T 17156.4-1997 Graphic technology--Prepress digital data exchange--Colourpictures data on magnetic tape
- GB 18543-2001 Occupational exposure limit of hydroquinone in workplace air
- GB 5135.1-2003 Automatic sprinkler fire extinguishing system Part 1: Sprinkler heads
- JB/T 9146-1999 Rectangular spline machining allowance and tolerance
- JB/T 6939.1-2004 Controllers for off-grid wind turbines Part 1: Technical conditions
- GB/T 15326-1994 Appearance quality of lip seals for rotating shafts
- JB/T 6921-1993 Roots vacuum pump unit
- GB 4706.30-2002 Safety of household and similar electrical appliances - Particular requirements for kitchen machines
- GB/T 3432.4-1989 Semiconductor integrated circuit TTL circuit series and varieties 54/74LS series varieties
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com