JB/T 6677.1-1993 Position and operation of common control devices for agricultural and forestry tractors and machinery, lawn and garden machinery

This standard specifies the control type, position and control direction of common control devices for agricultural and forestry tractors and machinery, lawn and garden machinery. JB/T 6677.1-1993 Position and control method of common control devices for agricultural and forestry tractors and machinery, lawn and garden machinery JB/T6677.1-1993 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T6677.1-93
Position and operation method of common control devices for agricultural and forestry tractors and machinery, lawn and gardening machinery Issued on June 4, 1993
Ministry of Machinery Industry of the People's Republic of China
Implementation on January 1, 1994
Mechanical Industry Standard of the People's Republic of China
Position and operation method of common control devices for agricultural and forestry tractors and machinery, lawn and gardening machinery JB/T6677.1-93
This standard is equivalent to the international standard ISO3789.1-1982 "Position and operation method of driver's control devices for agricultural and forestry tractors and machinery, lawn and gardening power machinery Part 1: Common control devices". Subject content and scope of application
This standard specifies the control type, position and control direction (including the direction of action) of common control devices for agricultural and forestry tractors and machinery, lawn and gardening machinery.
This standard applies to agricultural and forestry tractors and machinery, lawn and gardening machinery. 2 Reference standards
GB6230
Installation position and operation method of tractor control device JB/T6677.2 Position and operation method of control device of agricultural and forestry tractors and machinery, lawn and gardening machinery
Type, position and operation method of control device The type, position and operation method of driver's control device are shown in Table 1. Table 1
Manipulating device
Enginebzxz.net
Foot throttle
Hand throttle
Service brake
Approved by the Ministry of Machinery Industry on June 4, 1993
Installation position
According to the provisions of GB6230 and JB/T6677.2
A position that can be quickly approached by the driver's right foot, installed on the right side of the brake pedal
Installed in front of or to the right of the driver and in a position that is convenient for the driver to operate
Moving the pedal forward or downward increases the engine speed
The movement direction of the joystick is in a plane parallel to the longitudinal axis of the driving vehicle, and its movement direction should be away from the driver (usually forward or upward increases the engine speed)
According to GB6230 and J B/T6677.2 provisions
In front of the driver
When equipped with a steering wheel, clockwise rotation should make the vehicle turn right, and clockwise rotation is a left turn. Special requirements for steering. According to GBG230 and JD/T6G7T.2 provisions, implemented on January 1, 1994
Control device
Foot brake
Hand brake
Parking brake
Brake of trailer or towing equipment
Foot control
Hand control
Transmission system
Clutch
Combination of driving speed and direction
Foot control (single pedal)
Foot control (double pedal)
Hand control
Gear selection
JB/T 6677.193
Continued Table 1
Installation location
The brake pedal should be located at a convenient position for the driver's right foot
At the driver's side
Operation method
The direction of movement of the brake pedal is generally forward or downward to engage the brake
When the wheeled tractor is equipped with brake pedals for left and right braking respectively, the brake should be interlocked to prevent excessive deviation due to braking when driving in a straight line
Pull action is preferred. When equipped with left and right independent hand control mechanisms, the brake should be interlocked to prevent excessive deviation due to braking when driving in a straight line
According to GB6230 and JB/T6677. 2 regulations
Combined with the service brake pedal
Separate right-hand joystick
According to the regulations of GB6230 and JB/T6677.2
A convenient position for the driver's right foot
According to the regulations of GB6230 and JB/T6677.2
A convenient position for the driver to operate
Using a pulling action
The operating mechanism should effectively make the pedal on the support shaft under the driver's feet in a neutral position when not working. The forward or downward movement of the front end of the pedal should cause forward movement and increase the forward movement speed. The downward movement of the rear end of the pedal should cause reverse movement and increase the reverse speed. This operation should be able to directly convert forward movement into reverse movement through the neutral position. This structure should be able to prevent automatic gear shifting and should be set up with a reliable neutral position
Moving the joystick forward or upward from the neutral position is for forward movement and increase forward speed; moving it backward or downward is for reverse movement and increase reverse speed. When this selective operation can be directly converted from forward to reverse via neutral position, this structure should be able to prevent automatic gear jumping and should be equipped with a reliable neutral position
Control device
Linear operation (hand operation)
Non-linear operation
Direction change operation
"Forward and reverse"
Detachment of supporting agricultural implement device
Hand operation
Foot operation
Differential lock
Power output
Clutch
Foot operation
Hand operation
Implements and attachments
Additional instructions:
JB/T 6677.193
Continued Table 1
Installation position
Position convenient for driver's operation
Position convenient for driver's operation
Position convenient for driver's operation
Position convenient for driver's operation
Position convenient for driver's left foot
Position convenient for driver's right foot or right handPosition convenient for driver's left foot
Position convenient for driver's control
Method of operation
Move the joystick gradually upward or forward from the neutral position to select a gear to increase forward speed; move the joystick gradually downward or backward from the neutral position to select a reverse gear to increase normal speed. When the joystick can directly pass through the neutral position from forward to reverse, a separate and reliable "neutral" position should be provided. When passing through the neutral position, there should be a device to prevent automatic shifting to prevent accidental movement of the joystick
The shift diagram should be simple and the markings should be clear, especially the neutral position should be easy to identify and easy to select
Moving the joystick forward makes the vehicle move forward: moving the joystick backward makes the vehicle move backward. If there is a neutral position, there should be a device to prevent the joystick from accidentally moving from the neutral position. Safety device
Move the joystick backward or downward to disengage
Push the pedal forward or downward to disengage
Forward or downward to engage. When the differential lock is engaged, there should be a clear indication
Push the pedal forward or downward to disengage. When a double-acting high-clutch is used, the power output clutch disengagement action should be the second level
Move the joystick downward or backward to disengage. The driver can only operate in his working position according to GB6230 and JB/T667 7.2 provisions
This standard is proposed and managed by the China Agricultural Mechanization Science Research Institute of the Ministry of Machinery Industry. This standard is drafted by the China Agricultural Mechanization Science Research Institute and Luoyang Tractor Research Institute. The main authors of this standard are Chen Junbao, Pan Keqiu and Zhang Lan. 3
People's Republic of China
Machinery Industry Standard
Location and operation method of common control devices for agricultural and forestry tractors and machinery, lawn and garden machinery JB/T6677.1-93
Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (PO Box 8144, Beijing 100081)
Copyright reserved
Reproduction prohibited
Format 880×12301/16 Printing sheet 1/2 Number of words 5,000 First edition in December 1993
First printing in December 1993
Print run 00,001-500 Price 3.00 yuan
Serial number 1212
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.