INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 5639.1-1985 Expanded tee pipe joint

time: 2024-08-04 14:51:46
  • GB/T 5639.1-1985
  • Abolished

Basic Information

  • Standard ID:

    GB/T 5639.1-1985

  • Standard Name:

    Expanded tee pipe joint

  • Chinese Name:

    扩口式三通管接头

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1985-01-01

  • Date of Implementation:

    1986-09-01

  • Date of Expiration:

    2008-11-01

standard classification number

  • Standard ICS number:

    Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting parts

  • China Standard Classification Number:

    Machinery>>General Parts>>J15 Pipe Accessories

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1986-09-01

Other Information

  • Release date:

    1985-11-25

  • Review date:

    2004-10-14

  • Drafting Organization:

    Standardization Institute of the Ministry of Machinery Industry

  • Focal point Organization:

    National Technical Committee for Standardization of Pipe Accessories

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 5639.1-1985 Flared Tee Pipe Fittings GB/T5639.1-1985 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Flared type tube fittings--
Union teeAssembly
This standard applies to flared type tee pipe fittings for piping systems with oil and gas as the medium. 2
Marking example:
GB 5639,2—R6
GB 5647—85
GB 5846-B5
GR6639.2—B5
GB5648-85
Type A port tee pipe joint with pipe outer diameter D. of 10mm Pipe joint A10GB5639.1·85
National standard issued on 1985-11-25
UDC 621.643.4
GB 5639.185
Implementation on 1986-09-01
Foreign diameter
M10 ×1
M 12 × 1.5
M 14 × 1.5
M16 ×1.5
M18 × 1.5www.bzxz.net
M 22 × 1.5
M27 × 1.5
M30×2
M33×2
M36×2
M39 × 2
M 42 ×2
M45×2
GB5639.1-85
Technical conditions are in accordance with the provisions of GB5653-85 "Technical Conditions for Flared Pipe Fittings". Additional Notes:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. Quality (Steel)
kg/100 pieces
This standard is issued by the Standardization Research Institute of the Ministry of Machinery Industry and Shanghai Hydraulic Accessories! , Changchun Automobile Research Institute, Shanghai Hydraulic and Pneumatic Research Institute. The main drafters of this standard are Hu Lusheng, Li Yuning, and Zhang Qianlong. From the date of implementation of this standard, the original ministry standard JB1905-77 "Expanded Tee Pipe Fitting" will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com