JB/T 2999.1-1998 Camshaft grinding machine parameters

This standard specifies the parameters of camshaft grinders with a maximum workpiece rotation diameter of 125 to 200 mm and a maximum workpiece length of 315 to 2000 mm. This standard applies to newly designed camshaft grinders and CNC camshaft grinders. JB/T 2999.1-1998 Camshaft grinder parameters JB/T2999.1-1998 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T2999.1-1998
Camshaft Grinder
Published on July 17, 1998
National Bureau of Machinery Industry
Implemented on December 1, 1998
JB/T2999.1—1998
This standard has revised JB/Z172—81 "Camshaft Grinder Parameters" according to the requirements of camshaft grinder users and the development of technology.
The main differences between this standard and JB/Z172—81 are: 1. The maximum workpiece length column has been increased by 315mm; 2. The types and sizes of the head and tail frame taper holes have been increased. This standard is part of the camshaft grinder series of standards. JBT2999, under the general title of "Camshaft Grinding Machine", includes the following three parts:
Part 1
(i.e. JB/T2999.1): Parameters:
Part 2 (i.e. JB/T2999.2): Accuracy inspection: Part 3 (i.e. JB/T2999.3): Technical conditions. This standard will replace JB/Z172-81 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the Grinding Machine Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The responsible drafting unit of this standard is Changchun No. 1 Machine Tool Factory. This standard was first issued in November 1981.
1 Scope
Machinery Industry Standard of the People's Republic of ChinabZxz.net
Camshaft Grinder
JB/T2999.1-1998
Replaces JB/Z172-81
This standard specifies the parameters of camshaft grinders with a maximum workpiece rotation diameter of 125~200mm and a maximum workpiece length of 315~2000mm.
This standard applies to newly designed camshaft grinders and also to CNC camshaft grinders. 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and the parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T1443-1996 Self-clamping cone for machine tools and tool handles 3 Parameters
The type of camshaft grinder is shown in the figure below. Approved by the State Machinery Industry Bureau on July 17, 1998, EE implemented on December 1, 1998. The parameters of the machine tool should comply with the provisions of Table 1. Maximum workpiece rotation diameter D Maximum workpiece length L Morse taper number of the spindle taper hole of the head and tailstock (according to GB/T1443-1996) JB/T 2999.1—1998
Mechanical Industry Standard
Camshaft Grinding Machine Parameters
JB/T2999.11998
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Words 6000
Format 880×1230
First Printing in December 1998
First Edition in December 1998
Print Quantity 00,001-500
Cost 5.00 Yuan
98-152
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.