- Location:
- Standard Download >>
- National Standard (GB) >>
- GB 8140-1987 Bleached shellac

GB 8140-1987 Bleached shellac
time:
2024-08-09 09:45:57
- GB 8140-1987
- in force
Standard ID:
GB 8140-1987
Standard Name:
Bleached shellac
Chinese Name:
漂白紫胶
Standard category:
National Standard (GB)
-
Date of Release:
1987-08-12 -
Date of Implementation:
1988-05-01
Standard ICS number:
Chemical Technology>>71.100 Chemical Products65AgricultureChina Standard Classification Number:
Agriculture & Forestry>>Forestry>>B72 Forest Chemical Raw Materials
alternative situation:
Replaced LY 207-1976; replaced by GB/T 8140-2009Procurement status:
≈ISO 57-75
Release date:
1987-08-12Review date:
2004-10-14Drafter:
Wu Tongfang, Yang Luan, Ma Wanqing, Wei ChaokuanDrafting Organization:
Research Institute of Forest Chemical Industry, Chinese Academy of ForestryFocal point Organization:
Research Institute of Forest Chemical Industry, Chinese Academy of ForestryPublishing Department:
National Bureau of StandardsCompetent Authority:
State Forestry Administration

Skip to download
Summary:
This standard is applicable to bleached shellac and refined bleached shellac. This standard is proposed with reference to the international standard ISO 57-1975 "bleached shellac". GB 8140-1987 Bleached shellac GB8140-1987 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of ChinabZxz.net
Bleached lac
Bleached lac
This standard applies to bleached lac and refined bleached lac. This standard is proposed with reference to the international standard ISO 57-
1975 "Bleached lac":
UDC 634. 0. 892.6
GB 8140-87
Replaces LY207--76
Bleached lac refers to light-colored lac made from lac raw material or granular lac, dissolved in sodium carbonate solution or other weak alkaline solution, and then bleached with a bleaching agent to remove impurities or lac wax; bleached lac containing wax is ordinary bleached lac; dewaxed bleached lac is refined bleached lac. 2 Technical requirements
The technical indicators of bleached lac are as follows.
Color index, No.
Water content, %
Hot ethanol insoluble matter, %
Ash content, %
Wax, %
Water soluble matter, %
Acid value, KOHmg/g
Fluorine content, %
Inorganic acid (in HSO.), %
Free chlorine and peroxide
Note: ①Storage period: one year for grade 1 and 8 months for grade 11. ②The product is not allowed to contain rosin and other adulterants. ③Iodine value and saponification value shall be agreed upon by both parties if necessary. ①All indicators in bleached shellac are calculated based on the results of absolute dry samples. 3 Other provisions
Ordinary bleached shellac
Refined bleached shellac
3.1 If the products of this standard become insoluble in alcohol within one year for Grade 1 products and within eight months for Grade 1 products from the date of production, the buyer may request a return or compensation.
3.2 Other provisions of this standard shall be implemented in accordance with the provisions of GB8138-87 "Lac Sheet". 4 Packaging, transportation and storage
4.1 Bleached shellac is packed in wooden boxes or other packaging materials, lined with kraft paper. The net weight of each box is 25kg. The manufacturer, product name, grade and production date are marked on the box, and the words "sun protection" and "moisture protection" are marked. The product inspection certificate is placed in the box. 4.2 The storage and transportation time of the product should be reduced as much as possible. During transportation, it is strictly forbidden to be exposed to the sun, rain, or close to heat sources or humid places. Approved by the Ministry of Forestry of the People's Republic of China on November 12, 1987. Implementation on May 1, 1988. GB 8140-87. The product should be stored in a dry, ventilated, and cool room to prevent caking. 4.3. Product inspection. The technical indicators of bleached shellac shall be carried out in accordance with GB8143-87 "Testing methods for shellac products". Additional notes: This standard was drafted by the Institute of Forest Chemical Industry, Chinese Academy of Forestry. The main drafters of this standard are Wu Tongfang, Yang Luan, Ma Wanqing, and Wei Chaokuan. 126
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Bleached lac
Bleached lac
This standard applies to bleached lac and refined bleached lac. This standard is proposed with reference to the international standard ISO 57-
1975 "Bleached lac":
UDC 634. 0. 892.6
GB 8140-87
Replaces LY207--76
Bleached lac refers to light-colored lac made from lac raw material or granular lac, dissolved in sodium carbonate solution or other weak alkaline solution, and then bleached with a bleaching agent to remove impurities or lac wax; bleached lac containing wax is ordinary bleached lac; dewaxed bleached lac is refined bleached lac. 2 Technical requirements
The technical indicators of bleached lac are as follows.
Color index, No.
Water content, %
Hot ethanol insoluble matter, %
Ash content, %
Wax, %
Water soluble matter, %
Acid value, KOHmg/g
Fluorine content, %
Inorganic acid (in HSO.), %
Free chlorine and peroxide
Note: ①Storage period: one year for grade 1 and 8 months for grade 11. ②The product is not allowed to contain rosin and other adulterants. ③Iodine value and saponification value shall be agreed upon by both parties if necessary. ①All indicators in bleached shellac are calculated based on the results of absolute dry samples. 3 Other provisions
Ordinary bleached shellac
Refined bleached shellac
3.1 If the products of this standard become insoluble in alcohol within one year for Grade 1 products and within eight months for Grade 1 products from the date of production, the buyer may request a return or compensation.
3.2 Other provisions of this standard shall be implemented in accordance with the provisions of GB8138-87 "Lac Sheet". 4 Packaging, transportation and storage
4.1 Bleached shellac is packed in wooden boxes or other packaging materials, lined with kraft paper. The net weight of each box is 25kg. The manufacturer, product name, grade and production date are marked on the box, and the words "sun protection" and "moisture protection" are marked. The product inspection certificate is placed in the box. 4.2 The storage and transportation time of the product should be reduced as much as possible. During transportation, it is strictly forbidden to be exposed to the sun, rain, or close to heat sources or humid places. Approved by the Ministry of Forestry of the People's Republic of China on November 12, 1987. Implementation on May 1, 1988. GB 8140-87. The product should be stored in a dry, ventilated, and cool room to prevent caking. 4.3. Product inspection. The technical indicators of bleached shellac shall be carried out in accordance with GB8143-87 "Testing methods for shellac products". Additional notes: This standard was drafted by the Institute of Forest Chemical Industry, Chinese Academy of Forestry. The main drafters of this standard are Wu Tongfang, Yang Luan, Ma Wanqing, and Wei Chaokuan. 126
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 8631-2001 Determination of dimensional changes of textile fabrics caused by cold water immersion
- JB/T 10170-2000 Test specification for lifting mechanism of truck crane and tire crane
- QB/T 2445-1999 Mineralized water device
- GB/T 11594-1989 Definition table of interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) on public data networks
- GB/T 8107-1987 Test method for pressure differential flow characteristics of hydraulic valves
- GB/T 11383-1989 Information processing - Eight-bit code structure and encoding rules for information exchange
- JB/T 5158-1991 Technical requirements for forage seed awn removers
- HG/T 3569-2001 Determination of light absorption of color formers
- GBJ 15-1988 Code for design of building water supply and drainage
- JB/T 2560-1991 Types and dimensions of integral lined positive sliding bearing seats
- HG 29807-1991 Calculation method for comprehensive energy consumption of carbon black products
- GB 50275-1998 Code for construction and acceptance of compressor, fan and pump installation projects
- GB/T 14911-1994 Basic terms of surveying and mapping
- JB/T 9061-1999 Combined cold storage
- JB/T 9990.2-1999 Spur bevel gear planing cutters Part 2: Technical requirements
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]