INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

JB/T 8036.1-1999 Machine tool fixture parts and components screw supports

time: 1999-08-06 15:00:00
  • JB/T 8036.1-1999
  • in force

Basic Information

standard classification number

  • Standard ICS number:

    General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)

  • China Standard Classification Number:

    Machinery>>Process Equipment>>J44 General Fixture

associated standards

Publication information

  • publishing house:

    China Machinery Industry Press

  • Publication date:

    2000-01-01

Other Information

  • Focal point Organization:

    Mechanical Science Research Institute

  • Publishing Department:

    State Machinery Industry Bureau
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard specifies screw supports with thread specifications of M6 to M24. JB/T 8036.1-1999 Machine tool fixture parts and components screw supports JB/T8036.1-1999 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtureswww.bzxz.net
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01
1 Scope
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixturesSerewrest
The parts and units of jigs and fixturesSerewrest
This standard specifies the screw supports with thread specifications of M6 to M24. 2 Reference standards
JB/T8036.1-1999
Replaces JB/T 8036—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards GB/T97.1—1985 Flat washers Grade A
GB/T699—1988
Technical conditions for high-quality carbon structural steel
JB/T8044—1999 Technical requirements for machine tool fixture parts and components 3 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Bureau of Machinery Industry on August 6, 1999 Type B
Implemented on January 1, 2000
Basic dimensions
Limited tolerances
Technical conditions
JB/T 8036.11999
4.1Material: 45 steel in accordance with the provisions of GB/T699. 4.2Heat treatment: 35~40HRC.
Other technical conditions in accordance with the provisions of JB/T8044. 4.3
Marking example:
d-M8, 1-10mm A-type screw support:
AM8×10JB/T 8036.1—1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com