JB/T 8032.1-1999 Flat feeler gauges for machine tool fixture parts and components
time:
1999-08-06 15:00:00
- JB/T 8032.1-1999
- in force
Standard ID:
JB/T 8032.1-1999
Standard Name:
Flat feeler gauges for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 对刀平塞尺
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8032.1-1995 (original standard number GB/T 2244-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8032.1-1999 JB/T 8032.1-1999 Machine tool fixture parts and components flat feeler gauge JB/T8032.1-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Bureau of Machinery Industry
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of ChinawwW.bzxz.Net
Parts and units of jigs and fixturesFlat feeler for tool alignment
The parts and units of jigs and fixturesFlat feeler for tool alignmentThis standard specifies the flat feeler for tool alignment with a specification of 1~5mm. Referenced Standards
JB/T 8032.1—1999
Replaces JB/T8032.1—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T12981986 Technical conditions for carbon cable tool steel JB/T8044—1999
3 Dimensions
Technical requirements for machine tool fixture parts and components
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999 220
Implementation on January 1, 2000
4 Technical conditions
Basic dimensions
4.1 Material: T8 in accordance with the provisions of GB/T1298. 4.2 Heat treatment: 55~60HRC.
4.3 Other technical conditions in accordance with the provisions of JB/T8044. 5 marking
Marking example:
H=5mm tool setting ruler:
feeler gauge 5JB/T8032.1—1999
JB/T8032.1-1999
limit deviation h8
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Bureau of Machinery Industry
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of ChinawwW.bzxz.Net
Parts and units of jigs and fixturesFlat feeler for tool alignment
The parts and units of jigs and fixturesFlat feeler for tool alignmentThis standard specifies the flat feeler for tool alignment with a specification of 1~5mm. Referenced Standards
JB/T 8032.1—1999
Replaces JB/T8032.1—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T12981986 Technical conditions for carbon cable tool steel JB/T8044—1999
3 Dimensions
Technical requirements for machine tool fixture parts and components
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999 220
Implementation on January 1, 2000
4 Technical conditions
Basic dimensions
4.1 Material: T8 in accordance with the provisions of GB/T1298. 4.2 Heat treatment: 55~60HRC.
4.3 Other technical conditions in accordance with the provisions of JB/T8044. 5 marking
Marking example:
H=5mm tool setting ruler:
feeler gauge 5JB/T8032.1—1999
JB/T8032.1-1999
limit deviation h8
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 7946-1987 Installation and safe use of electrified barbed wire and electric fences
- GB/T 15436-1995 Determination of nitrogen oxides in ambient air - Saltzman method
- JB/T 10436-2004 Cross-linkable flame retardant polyolefin materials for wires and cables
- JB/T 7990-1998 Superhard abrasives - artificial diamond powder and cubic boron nitride powder
- JB/T 9162.19-1999 Extension rod dimensions
- HG/T 2397-1992 Open rubber mixing mill product quality classification and inspection details
- GB 50185-1993 Industrial equipment and pipeline insulation engineering quality inspection and evaluation standard
- GB/T 5206.4-1989 Vocabulary of paints and varnishes Part 4: Terms for the physical and chemical properties of coatings and coating films
- JB/T 6405-1992 Large stainless steel castings
- SJ 20527A-2003 General Specification for Microwave Components
- GB/T 15018-1994 Precision alloy grades
- GB 16840.1-1997 Technical identification methods for electrical fire causes Part 1: Macroscopic method
- HG/T 3050.1-2001 Rubber or plastics coated fabrics - Determination of properties of the whole roll - Part 1: Methods for determination of length, width and net mass
- JB/T 8104-1999 Test methods for chamber filter presses and plate and frame filter presses
- JB/T 8052-1996 Non-lubricated liquefied petroleum gas circulating compressor
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com