
Dangerous goods - Viscosity test for of flammable viscous liquids
time:
2024-06-29 06:01:00
- GB/T 21623-2008
- in force
Standard ID:
GB/T 21623-2008
Standard Name:
Dangerous goods - Viscosity test for of flammable viscous liquids
Chinese Name:
危险品 易燃黏性液体黏度试验方法
Standard category:
National Standard (GB)
-
Date of Release:
2008-04-01 -
Date of Implementation:
2008-09-01
Standard ICS number:
Environmental protection, health care and safety >> 13.300 Dangerous goods protectionChina Standard Classification Number:
Comprehensive>>Marking, packaging, transportation, storage>>A80 Marking, packaging, transportation, storage Comprehensive
publishing house:
China Standards PressISBN:
155066·1-31492Publication date:
2008-06-01Plan number:
20068248-T-469
Release date:
2008-04-01Review date:
2023-12-28Drafter:
Liu Junfeng, Zhang Junxi, Wang Xiaobing, Xu Siqiao, Liu Guochuan, Tang Shutian, Tang JianmingDrafting Organization:
Jiangsu Inspection and Quarantine Bureau, Sinochem Chemical Standardization Institute, Beijing Entry-Exit Inspection and Quarantine BureauFocal point Organization:
National Technical Committee on Hazardous Chemicals Management StandardizationProposing Organization:
National Technical Committee on Hazardous Chemicals Management Standardization (SAC/TC 251)Publishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China National Standardization AdministrationCompetent Authority:
National Standardization Administration

Skip to download
Summary:
This standard is formulated for the first time. This standard specifies the instruments and equipment, operating procedures and results of viscosity test of viscous liquids. This standard is applicable to viscous liquids with a flash point below 23°C, such as paints, enamels, varnishes, adhesives and polishes. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its consistency is non-equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21623-2008 Viscosity test method for dangerous goods flammable viscous liquids GB/T21623-2008 Standard download decompression password: www.bzxz.net
This standard is formulated for the first time. This standard specifies the instruments and equipment, operating procedures and results of viscosity test of viscous liquids. This standard is applicable to viscous liquids with a flash point below 23°C, such as paints, enamels, varnishes, adhesives and polishes. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its consistency is not equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its consistency is not equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Participating drafting units of this standard: Sinochem Chemical Standardization Research Institute, Beijing Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard are: Liu Junfeng, Zhang Junxi, Wang Xiaobing, Xu Siqiao, Liu Guochuan, Tang Shutian, Tang Jianming.
This standard is formulated for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this standard.
GB19458 General safety regulations for inspection of hazardous properties of dangerous goods
GB19521.2 Safety regulations for inspection of hazardous properties of flammable liquids
ISO2431 Determination of outflow time by flow cup for paints and varnishes
United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (Fourth Revised Edition)
This standard is formulated for the first time. This standard specifies the instruments and equipment, operating procedures and results of viscosity test of viscous liquids. This standard is applicable to viscous liquids with a flash point below 23°C, such as paints, enamels, varnishes, adhesives and polishes. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its consistency is not equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its consistency is not equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Participating drafting units of this standard: Sinochem Chemical Standardization Research Institute, Beijing Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard are: Liu Junfeng, Zhang Junxi, Wang Xiaobing, Xu Siqiao, Liu Guochuan, Tang Shutian, Tang Jianming.
This standard is formulated for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this standard.
GB19458 General safety regulations for inspection of hazardous properties of dangerous goods
GB19521.2 Safety regulations for inspection of hazardous properties of flammable liquids
ISO2431 Determination of outflow time by flow cup for paints and varnishes
United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (Fourth Revised Edition)

Some standard content:
National Standard of the People's Republic of China
GR/T 21623---2008
Dangerous goods
Viscosity test method for flammable viscous liquids
Dangerous goods-yisrasity test for flammable viscous liquids2008-04-01 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration
2008-09-01 Implementation
3/23623---26C8
This standard is a recommendation for the import and export of dangerous substances by the United Nations. The degree of consistency is not equivalent. This standard is not effective for the relevant technical content and is reported in the standard text format. .1.2000 was revised and issued by the National Chemical Engineering Technical Committee SC, which is the national energy-saving paint and electrical equipment quality management team of Beijing Institute of Chemical Technology. The unit request for entry and exit inspection according to the draft standard is: China Chemical Standardization Research Institute, Longjing Entry and Exit Inspection Bureau, the main technology of this standard is Liu Lifeng, Wen Chao, Xiao Mai, Rubber Edition, Engraving Building, Mo Shuguo, Xin Ming, this ethnic group is happy to travel.|tt||m1 Figure
Dangerous goods Viscosity test method for flammable viscous liquids This standard verifies the new instrument for testing the viscosity of flammable viscous liquids, and the operating equipment must be flammable. This family of paint, porcelain, varnish, glue cutting process combustion static science point center viscosity wave method 2 amount of normative academic documents
3/21623---2008
The following documents in the tea teaching standard title use guarantee to become your maintenance of the tea model of all the academic documents you use period, its service is the dance of the modification list (large package of circumstances talk about the revision of the order version are not applicable to this standard, solution, just move the root quick change standard service to reach the pragmatic and meticulous record of the design of this basic document, wind doubt jade obtained later according to the text CB15155 dangerous performance meal # Xin insurance special sale
G1519521.2 product end covering body dangerous test
1s0 2411
United Nations American letter
3 new definition of terms
521.2.1500
There are sea and room
swimming body
, the new version of the micro-scale is all swimming,
Your suggestion of pain is beautiful, martial arts and standards in class 86
glue low 23C
Hong Kong rolling porcelain
Chinese method source around
sample institute 50 cups
5 only with equipmentwww.bzxz.net
I standard source flow E tank spot or m
intensity meter, fine braided line good points pass is 0.1!
sand table points for internal fine
flat stock 6.1.3 According to the degree of bacteria of the sample, select the appropriate seeding outflow cup, and then select the outflow time between 30-100. 2 minutes, 2 test
6.2.1 Put the flow mother on the bracket, adjust the support level, and then quickly put the cup under the horizontal position. 62.2 The standard is released with the effect of sugar meal, which is called the cup door # flow through the large machine G8/T 21623--2008
Push the plug to the end of the cup with your hand, and let the sample flow out slowly. Use the single pants to clean the water along the top of the flow point. Put the remaining 6.2.3
in the test cup. When it is good, do not put it in the cup. Then use your finger to feel it. When the liquid flows out, stop the meter. The second is the full flow time of the sample. Read the test carefully. 6.4 The single shot can be full and the effect () request
CB/T 21623-2008
Your dangerous spring
Fruit burning liquid medicine court sincere test school
China source service
Secretly set up and issued
Beijing Jianxingji
No. 19 North Street
No chicken:
Network tewwsn
Tel: 88333348
r:et,cr
88317519
Publishing company city, new
All tide Xinhua Bookstore distribution
Youben 383x1230 18
Zhang (5 academic numbers,
Annual e-efficiency rate
Maintain the first · Huan film
Affiliate number: 16108%+ 1-3149 Cage price 10,00. Available for immediate installation. No information is available from our company. All rights reserved.
Phone: (030) 68533533
8002791
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
GR/T 21623---2008
Dangerous goods
Viscosity test method for flammable viscous liquids
Dangerous goods-yisrasity test for flammable viscous liquids2008-04-01 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration
2008-09-01 Implementation
3/23623---26C8
This standard is a recommendation for the import and export of dangerous substances by the United Nations. The degree of consistency is not equivalent. This standard is not effective for the relevant technical content and is reported in the standard text format. .1.2000 was revised and issued by the National Chemical Engineering Technical Committee SC, which is the national energy-saving paint and electrical equipment quality management team of Beijing Institute of Chemical Technology. The unit request for entry and exit inspection according to the draft standard is: China Chemical Standardization Research Institute, Longjing Entry and Exit Inspection Bureau, the main technology of this standard is Liu Lifeng, Wen Chao, Xiao Mai, Rubber Edition, Engraving Building, Mo Shuguo, Xin Ming, this ethnic group is happy to travel.|tt||m1 Figure
Dangerous goods Viscosity test method for flammable viscous liquids This standard verifies the new instrument for testing the viscosity of flammable viscous liquids, and the operating equipment must be flammable. This family of paint, porcelain, varnish, glue cutting process combustion static science point center viscosity wave method 2 amount of normative academic documents
3/21623---2008
The following documents in the tea teaching standard title use guarantee to become your maintenance of the tea model of all the academic documents you use period, its service is the dance of the modification list (large package of circumstances talk about the revision of the order version are not applicable to this standard, solution, just move the root quick change standard service to reach the pragmatic and meticulous record of the design of this basic document, wind doubt jade obtained later according to the text CB15155 dangerous performance meal # Xin insurance special sale
G1519521.2 product end covering body dangerous test
1s0 2411
United Nations American letter
3 new definition of terms
521.2.1500
There are sea and room
swimming body
, the new version of the micro-scale is all swimming,
Your suggestion of pain is beautiful, martial arts and standards in class 86
glue low 23C
Hong Kong rolling porcelain
Chinese method source around
sample institute 50 cups
5 only with equipmentwww.bzxz.net
I standard source flow E tank spot or m
intensity meter, fine braided line good points pass is 0.1!
sand table points for internal fine
flat stock 6.1.3 According to the degree of bacteria of the sample, select the appropriate seeding outflow cup, and then select the outflow time between 30-100. 2 minutes, 2 test
6.2.1 Put the flow mother on the bracket, adjust the support level, and then quickly put the cup under the horizontal position. 62.2 The standard is released with the effect of sugar meal, which is called the cup door # flow through the large machine G8/T 21623--2008
Push the plug to the end of the cup with your hand, and let the sample flow out slowly. Use the single pants to clean the water along the top of the flow point. Put the remaining 6.2.3
in the test cup. When it is good, do not put it in the cup. Then use your finger to feel it. When the liquid flows out, stop the meter. The second is the full flow time of the sample. Read the test carefully. 6.4 The single shot can be full and the effect () request
CB/T 21623-2008
Your dangerous spring
Fruit burning liquid medicine court sincere test school
China source service
Secretly set up and issued
Beijing Jianxingji
No. 19 North Street
No chicken:
Network tewwsn
Tel: 88333348
r:et,cr
88317519
Publishing company city, new
All tide Xinhua Bookstore distribution
Youben 383x1230 18
Zhang (5 academic numbers,
Annual e-efficiency rate
Maintain the first · Huan film
Affiliate number: 16108%+ 1-3149 Cage price 10,00. Available for immediate installation. No information is available from our company. All rights reserved.
Phone: (030) 68533533
8002791
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JGJ 50-1988 Design specification for urban roads and buildings for the convenience of disabled people JGJ50-88
- GB/T 5319-2002 Determination of transverse rupture strength of sintered metal materials (excluding cemented carbide)
- JGJ 3-1991 Specification for the design and construction of reinforced concrete high-rise buildings JGJ3-91
- JB 4029-2000 Technical requirements for safety protection of grinding wheel guards of grinding machines
- GB/T 3514-1992 Determination of free sulfur content in vulcanized rubber - Sodium sulfite method
- GB 8232-1987 Millet
- GB/T 18359-2001 General requirements and test methods of paper and printing qualities for primary and secondary school textbooks
- HG/T 2673-1995 Phosphate rock for acid processing
- JB/T 6013-2000 Technical Specifications for Low-pressure Metal Oil Pipe Assemblies for Diesel Engines
- QB/T 2474-2000 Pin mortise door lock
- NY/T 2496-2013 Guidelines for testing specificity, consistency and stability of new plant varieties Asparagus
- HG/T 20570.19-1995 Flame arrester settings
- JB/T 7529-1994 Heat treatment of malleable cast iron
- SY/T 0532-1993 Bacterial analysis of oilfield injection water - Extinction dilution method
- QB/T 2133-1995 Rigid polyvinyl chloride (PVC-U) extrusion profiles for interior decoration
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com