HG 21537.5-1992 Carbon steel stuffing box for pipe (PN0.6)
time:
2024-08-13 14:54:25
- HG 21537.5-1992
- in force
Standard ID:
HG 21537.5-1992
Standard Name:
Carbon steel stuffing box for pipe (PN0.6)
Chinese Name:
管用碳钢填料箱(PN0.6)
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1993-06-14 -
Date of Implementation:
1993-09-01
Standard ICS number:
Chemical Technology>>71.120 Chemical EquipmentChina Standard Classification Number:
Chemical Industry>>Chemical Machinery and Equipment>>G91 Chemical Machinery and Equipment Parts
alternative situation:
HG 5-214-1981 HG 5-215-1981 HG 5-218-1981 HG 5-219-1981 HG 5-1410-1981
Skip to download
Summary:
HG 21537.5-1992 Carbon steel stuffing box for pipe (PN0.6) HG21537.5-1992 standard download decompression password: www.bzxz.net
Some standard content:
Carbon steel stuffing box for pipe
HG 21537. 5--92
1 Subject content and scope of application
This standard is for the sealing device of detachable internal extension pipes in chemical, petroleum, pharmaceutical and other industrial equipment. Its nominal pressure PN≤0.6MPa is suitable for medium temperature-200C occasions. 29
Type, basic parameters and size
The basic parameters and dimensions of the structural type of this standard are shown in the figure below and Table 2-1~2. DNS
See Table 22wwW.bzxz.Net
Same as part number 3
Same as part number 3
257273
Gland stud
QuantityDiameter
Table 2-1
See description
GB 898--88A type
GB6170-86
GB 97. 185
Table 2-2
Basic packing
13×13
25×25
22×22
3 Technical requirements
3.0.1 After the stuffing box is assembled, it shall be subjected to water pressure test together with the equipment. The test pressure and tightness shall be in accordance with the equipment assembly drawing.
3.0.2 The mechanical properties and materials of stud bolts and nuts shall be in accordance with the national standards of 6.8 and 6 respectively, and the mechanical properties of washers shall be 140HV. 32
The packing shall be soft packing, which can be selected according to the operating requirements and refer to Appendix II, 4. 0. 1
and shall be indicated on the equipment assembly drawing.
4.0.2 Marking example
The carbon steel packing box for pipes with a nominal diameter of DN50mm is marked as: packing box PNO.6DN50HG21537.5--92--4 The various specifications of packing boxes in this standard shall be marked according to the provisions of Table 4.0.3 when selected. 4.0.31
marking.
Specified marking
Stuffing box
Stuffing box
Stuffing box
Stuffing box
Stuffing box
Stuffing box
Stuffing box
HG 21537.5-92-1
HG 21537.5-92-2
HG21537.5-92—3
FIG 21537.5--92--4
HG 21537.5--92-5
HG 21537.5 --92-- 6
HG 21537.5--92--7
HG 21537. 5--92--8
HG 21537. 5--92--9
HG 21537.5--92--10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
HG 21537. 5--92
1 Subject content and scope of application
This standard is for the sealing device of detachable internal extension pipes in chemical, petroleum, pharmaceutical and other industrial equipment. Its nominal pressure PN≤0.6MPa is suitable for medium temperature-200C occasions. 29
Type, basic parameters and size
The basic parameters and dimensions of the structural type of this standard are shown in the figure below and Table 2-1~2. DNS
See Table 22wwW.bzxz.Net
Same as part number 3
Same as part number 3
257273
Gland stud
QuantityDiameter
Table 2-1
See description
GB 898--88A type
GB6170-86
GB 97. 185
Table 2-2
Basic packing
13×13
25×25
22×22
3 Technical requirements
3.0.1 After the stuffing box is assembled, it shall be subjected to water pressure test together with the equipment. The test pressure and tightness shall be in accordance with the equipment assembly drawing.
3.0.2 The mechanical properties and materials of stud bolts and nuts shall be in accordance with the national standards of 6.8 and 6 respectively, and the mechanical properties of washers shall be 140HV. 32
The packing shall be soft packing, which can be selected according to the operating requirements and refer to Appendix II, 4. 0. 1
and shall be indicated on the equipment assembly drawing.
4.0.2 Marking example
The carbon steel packing box for pipes with a nominal diameter of DN50mm is marked as: packing box PNO.6DN50HG21537.5--92--4 The various specifications of packing boxes in this standard shall be marked according to the provisions of Table 4.0.3 when selected. 4.0.31
marking.
Specified marking
Stuffing box
Stuffing box
Stuffing box
Stuffing box
Stuffing box
Stuffing box
Stuffing box
HG 21537.5-92-1
HG 21537.5-92-2
HG21537.5-92—3
FIG 21537.5--92--4
HG 21537.5--92-5
HG 21537.5 --92-- 6
HG 21537.5--92--7
HG 21537. 5--92--8
HG 21537. 5--92--9
HG 21537.5--92--10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 8755-1988 Titanium and titanium alloy terminology metallographic spectra
- JB/T 6730-1993 Test method for magneto ignition system
- GB/T 9387.3-1995 Information processing systems Open Systems Interconnection Basic Reference Model Part 3: Naming and addressing
- HG/T 2783-1996 Test method for crushing resistance of molecular sieves
- JB/T 8651.4-1997 Machine tool lubrication system components - Block type progressive distributors
- GB/T 5453-1997 Determination of air permeability of textile fabrics
- JB/T 7881.4-1999 Test methods for wool shearing machines
- JB/T 8485.2-1998 CNC gear shaving machine accuracy inspection
- JB/T 8857-2000 Centrifugal submersible sewage pump
- GB/T 15072.8-1994 Chemical analysis methods for precious metals and their alloys - Determination of copper content in gold, palladium and silver alloys
- JB/T 7950-1999 Quick Cutting Nozzle
- GB 15563-1995 Seismic source grain
- JJG 976-2002 Verification Regulation of Opacimeters
- JB/T 9391-2001 Technical requirements for collision test benches
- GB/T 11299.3-1989 Satellite communication earth station radio equipment measurement methods Part 1: Measurements common to subsystems and subsystem combinations Section 3: Measurements in the intermediate frequency range
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com