INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 5285-1985 Hexagon head self-tapping screws

time: 2024-08-04 19:00:05
  • GB/T 5285-1985
  • in force

Basic Information

  • Standard ID:

    GB/T 5285-1985

  • Standard Name:

    Hexagon head self-tapping screws

  • Chinese Name:

    六角头自攻螺钉

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1985-08-01

  • Date of Implementation:

    1986-06-01

standard classification number

  • Standard ICS number:

    Mechanical systems and general parts>>Fasteners>>21.060.10 Bolts, screws, studs

  • China Standard Classification Number:

    Machinery>>General Parts>>J13 Fasteners

associated standards

  • Procurement status:

    ＝ISO 1479-83

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1986-05-01

Other Information

  • Release date:

    1985-08-01

  • Review date:

    2004-10-14

  • Drafting Organization:

    Machinery Standards Institute

  • Focal point Organization:

    National Technical Committee for Fastener Standardization

  • Proposing Organization:

    Ministry of Machinery Industry of the People's Republic of China

  • Publishing Department:

    National Bureau of Standards

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard specifies hexagonal head tapping screws with thread specifications of ST 2.2 to ST 9.5. This standard is equivalent to the international standard ISO 1479-1983 "Hexagonal head tapping screws". GB/T 5285-1985 Hexagonal head tapping screws GB/T5285-1985 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Hexagon head tapping screws
Heiagon head tapping screws
This standard specifies hexagon head tapping screws with thread effect specifications of ST 2.2 -ST 9.5. This standard is equivalent to the international standard IS01479-1983 "Hexagon head tapping screws". 2 Reference standards
GB528085 "Thread for self-tapping screws"! GB 3098.5-85 "Mechanical properties of fasteners - tapping screws" GB3103.1-82 "Tolerances of fasteners - bolts, screws and nuts" GB5267-85 "Threaded fasteners - coating": GB 90-85 "Fasteners acceptance inspection, marking and installation". 3 Size
Shape optional
Issued by National Bureau of Standards on August 1, 1985
UDC 621.82.215
.082.8
GB528.5—85
Implemented on June 1, 1986
GR 5285 --B5
(season)
4 Technical conditions
5 Marking
Mechanical properties
Surface treatment
Acceptance and packaging
Product grade
GB 5285-85
GB 5280 —85
GB 3098.5 -~ 85www.bzxz.net
GB 3103.1 82
Zinc passivation GB526785
GB 90 — 85
Thread specification ST3.5, nominal length 1=16mm, surface zinc-plated passivation C-type hexagon head self-tapping screws marking example Self-tapping screws GB5285—85-ST3.5×16C Additional instructions:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com