GB/T 4693-1984 Acceptance Rules for Finished Leather Products
time:
2025-02-24 22:54:44
- GB/T 4693-1984
- Abolished
Standard ID:
GB/T 4693-1984
Standard Name:
Acceptance Rules for Finished Leather Products
Chinese Name:
皮革成品验收规则
Standard category:
National Standard (GB)
-
Date of Release:
1984-10-06 -
Date of Implementation:
1985-05-01 -
Date of Expiration:
2007-09-29
Standard ICS number:
Textile and Leather Technology >> 59.140 Leather TechnologyChina Standard Classification Number:
Light Industry, Cultural and Living Goods>>Leather Processing and Products>>Y46 Fur and Leather
alternative situation:
Adjusted to QB/T 2801-2006
Review date:
2004-10-14Drafting Organization:
Fur and Leather Research Institute of the Ministry of Light IndustryFocal point Organization:
National Leather Industry Standardization Technical CommitteePublishing Department:
National Bureau of StandardsCompetent Authority:
China Light Industry Federation
Skip to download
Summary:
This standard applies to the acceptance of various leather products. GB/T 4693-1984 Acceptance rules for leather products GB/T4693-1984 standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 6432-1992 Compilation method for compressed air purification equipment models
- GB/T 3765-1983 Technical requirements for ferrule type pipe fittings
- SY/T 5661-1995 Drilling fluid viscosity enhancer 80A51
- GB 15743-1995 Passenger car side door strength
- QB/T 2598-2003 Determination of fiber brooming rate in papermaking
- JB/T 7884.1-1999 Technical requirements for sawtooth cotton gin
- JB/T 7902-1999 Linear Image Quality Meter
- GB/T 14618-1993 Technical requirements for frequency sharing between line-of-sight microwave relay communication systems and space radio communication systems
- GB/T 39223.5-2020 Ergonomic requirements for healthy home—Part 5:Mattress
- HGJ 231-1991 Specification for commissioning of large and medium-sized plants in the chemical industry
- JB/T 9220.1-1999 Chemical analysis methods for acidic slag of foundry cupola furnaces General principles and general provisions
- JB/T 8706-1998 Technical requirements for 50~200MW steam turbine generator rotor forgings without center hole
- GB 16794.1-1997 Information technology general multi-octet coded character set (Zone I) Chinese 48-dot matrix font Part 1: Songti
- JB/T 3267-1991 Brake shoes for narrow gauge industrial and mining electric locomotives
- GB/T 4958.7-1988 Measurement methods for equipment used in terrestrial radio-relay systems Part 2: Subsystem measurements Section 7: Transmitters
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com