HG/T 2129.19-1991 Flange type right angle equal diameter tees for chemical equipment parts made of acid-resistant phenolic plastics

HG/T 2129.19-1991 Acid-resistant phenolic plastics for chemical equipment parts Flange type right angle equal diameter tees HG/T2129.19-1991 Standard download decompression password: www.bzxz.net

Scope of application
Chemical Industry Standard of the People's Republic of China
Flanged right-angle equal-diameter tees made of acid-resistant phenolic plastic chemical equipment parts
HG/T2129.19-91
This standard applies to flanged right-angle equal-diameter tees made of acid-resistant phenolic plastic with an allowable temperature of -30C to 130℃ and an allowable pressure as specified in the table below.
2 Reference standards
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastic 3 Types and basic dimensions
Types and basic dimensions are as specified in the figure and table below, DN
A-part magnification cabinet
Note: corner not specified r>3mm
Ministry of Chemical Industry of the People's Republic of China "91-08-1 approved 1992-01-01 implementationbZxz.net
Nominal diameter
HG/T2129.19-91
4 Quality inspection, packaging, storage and transportation of raw materials and products 9
The quality inspection, packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2128 5 Marking example
Allowable pressure with temperature
MPa(kgf/cm
0. 40 (4)
0.15 (1.5)
0.13 (1.3)
Acid-resistant phenolic plastic flange type right angle equal diameter tee with nominal diameter DN=32mm, its marking symbol is: DN32HG/T2129.19-91
Additional instructions:
This standard is proposed by China National Chemical Equipment Corporation and is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute. The main drafters of this standard are He Jiabing and He Jin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.