GB 2494-2003 Safety rules for common abrasive tools

This standard specifies the maximum working speed of abrasives, acceptance, storage, installation, use and safety requirements for the equipment used. This standard applies to common abrasives GB 2494-2003 Common abrasives safety rules GB2494-2003 Standard download decompression password: www.bzxz.net

4.3 and 4.4 of this standard are recommended, and the rest are mandatory. Except for G213-1 Safety Rule 3, the main changes of this standard compared with GB2494-1995 are as follows: - C: B2494-19 is mandatory in its entirety. This standard is mandatory in its clauses; GB2494-2003-F24995 Chapter 3 \ "The maximum working speed of the grinding wheel shall not be less than the provisions of the following table", and the production standard is set as "the maximum working speed of the grinding wheel" in the third table of GB2494-1995 is modified to \ "Heavy-duty grinding wheel\", and the heavy-duty grinding wheel with binder is set as 50mm/~80mIm/%, for brown jade F0 and above, and hardness grade M and above The maximum working speed of the grinding wheel is revised to 3am/s, 40mm/5, 50mm/s, and the shape codes of the upper wheel and slow-feed grinding wheel are added. The internal wear of the speed safety blade grinding wheel and the small grinding wheel is excluded: 4.2 in GB2404-1995 is the speed standard 5.1. This standard is proposed by the China Machinery Industry Federation: This standard is approved by the National Abrasives Standardization Technical Committee (SAC/TC19). This standard is drafted by the Zhengzhou Abrasives Research Institute. The main drafters of this standard are Wen Pingsi Xiuying and Zhang Changwu. This standard was first issued in 19H1 and first signed in 23:23. 1 Scope
Ordinary Abrasives
Safety Rules
GB2494-2003 ||t t||This standard specifies the requirements for the operation, acceptance, storage, installation, use and use of variable-speed equipment. This standard is applicable to general equipment.
2 Normative referenced documents
The clauses in the following documents have become the series of provisions of the automotive industry through reference in technical standards. For any dated referenced document, all subsequent amendments (including those in the warranty period) or revisions shall not be applicable to this standard. However, according to the requirements of the parties to this standard who have not reached or agreed upon the validity of the document, the latest version of the referenced document without date shall be applicable to this standard. GHT2493 Wheel rotatability test method
G4h74 Grinding carbon signing full specification
3 The maximum working distance of the grinder
The maximum working distance of the tool shall be in accordance with the table Fixed,
Maximum working speed seat//m/:1
Deep drama
A-shaped sand grid
Warp chain plate tooth glue single
Medical light sand science
Ground single frying plate
Flexible ground sand insurance
No screw effect sand test
Flat and educational sand production
Color wheel
A-shaped inclined driving wheel||tt| |Double-material force sand grab
Concave sand pat
Cup-shaped effect wheel
Shuangsuo No. 41 Courtyard
Grid shape energy
Single and four-band modelWww.bzxZ.net
Type replaced with
128123
Station compound
Dip and moisten
Every hundred soil
Rotten agent fat
Binding agent
B 2494-2003
Xi Kaicha Ying
Agricultural surface question Apple cone sand model
Test colored sand whole
The same shape brick can
Thin slice wheel
Medical one
Old card soil sand ground
Snail beat me Yan
High speed multi-camel
Brown work grain F3 and more group and more speed
Belt for M and more important grinding wheel
Table 1 (continued)
Shape fast generation company
2b.2s.2d.
1 1,6,3* 2b
35 ~-40
50--5G
35,40,5
Working height/(m/s)
Combined diseases
5:--51:
35,26,5.3
Note: The highest working temperature of the special environment should be known to the user and must be marked. Collection and storage of abrasive tools
4? Before use, it must pass the quality inspection of the factory and can only be shipped after passing the inspection. 4.2 Prevent the tool from moving and colliding.
4.3 The height of the sand should not exceed 1.5F when it is lifted.
There is 4 Wei rubber, ester combined with thin film base, to prevent deformation, 4.5 The storage should be prevented from freezing.
Medical soil
Zhetai Science
Reinforced tree cell
Binding agent
60 --86
4.6 Resin, rubber and mold compound grinding wheels should be marked with the date of production. If the storage time exceeds 1 year, they should be re-inspected and registered every year. They should be used after they are qualified
4.7 Tools with working requirements must be marked with the manufacturer's requirements 5. Installation and use of tools
5.1 The user unit must inspect the products after receiving them to see if there are cracks and damages. Before use, they should be rotated according to GB/T2493. Grinding wheels that have passed the rotation inspection should be strictly installed and used. 5.2 The installation, use and use of tools shall comply with the requirements of GB4674.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.