JB/T 6413-1992 Type and basic parameters of inlet air heating unit

This standard specifies the shape and basic parameters of the air inlet heating unit. This standard applies to air inlet heating units for air conditioning, ventilation, heating, etc. where the maximum working pressure does not exceed 1.3MPa and the medium is hot water or steam. This standard does not apply to electric heating, thermal oil and other thermal coal units. JB/T 6413-1992 Type and basic parameters of inlet air heating unit JB/T6413-1992 Standard download and decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
Air inlet heating unit
Subject content and scope of application
Type and basic parameters
This standard specifies the type and application of air inlet heating unit Basic parameters. JB/T 6413--92
This standard applies to air inlet heating units (hereinafter referred to as "units") for air conditioning, ventilation, heating, etc. with a maximum working pressure not exceeding 1.3MPa and a medium of hot water or steam. ). This standard does not apply to units with electric heating, thermal oil and other heating media. 2 Types | For the unit, the air flows from right to left (left type), and the air flows from left to right (right type). 2.2 Model
Structural type: Left type uses Z, The right type is represented by Y
Rated air volume: Arabic numerals × 103m2/h Heat medium code: S for water, Q for steam
Inlet air heating unit code
Model example: || tt|| means that the heating medium is water, the air inlet volume is 3000m/h, the left-hand air inlet heating unit JRS 3-Z
3 Basic parameters
3.1 The rated working conditions are as shown in Table 1. Regulations!
The basic parameters of the 3.2 unit (cascade tube bundle) should not be lower than those specified in Table 2. Table 1
Air inlet status
Hot water| |tt||Number
Inlet water temperature
Water velocity
Steam pressure
Windward flow velocity
m/s|| tt | |tt||Heating coil
Hot water
Implemented in 1993-01-01
3.3| |tt||Type
JR9||tt ||JR12
JR80 ||tt || 4000
12 000
25 000||tt| |30 000
40 000
50 000
60 000
80 000
100000
8| |tt||16
120||tt ||160
JB/T6413-92
Table 2
50|| tt||60
400||tt| |500
The basic parameters of the unit (winding tube bundle) should not be lower than those specified in Table 3. Table 3
Pipe row Number
Rated air volume, m2/h
6000| |tt||9000
2||tt ||5
21| |tt||28
175||tt ||210
Rated heat supply, kw
420|| tt||560
rated heat supply.kw
135| |tt||180
48||tt ||64
20| |tt||30
200||tt ||250
688| |tt||850
33||tt ||44
Tube row number
Rated air volume, m/hwwW.bzxz.Net
60 000
100000
300| |tt||400
JB/T6413-92
Continued Table 3
420||tt ||560
rated heat supply, kw
The measured heat supply of the unit under rated working conditions should be less than 93% of the rated heat supply. The rated heat supply of the unit is determined according to the parameters in Table 1, and the atmospheric pressure at the time of measurement is 1013hPa. Additional notes:
This standard is proposed and administered by the Hefei General Machinery Research Institute of the Ministry of Mechanical and Electronics Industry. This standard is drafted by Harbin Air Conditioning Factory. The main drafters of this standard: Ren Shouyu and Zhu Yutian. 730
660| |tt||880
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.