JB/T 9162.15-1999 Compression screw dimensions
time:
2024-08-11 18:22:54
- JB/T 9162.15-1999
- in force
Standard ID:
JB/T 9162.15-1999
Standard Name:
Compression screw dimensions
Chinese Name:
压紧螺钉 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.15-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.15-1999 JB/T 9162.15-1999 Compression screw dimensions JB/T9162.15-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
National Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of ChinabzxZ.net
Clamping screws
Clampingscrew
Dimentinns
This standard specifies the types and sizes of clamping screws. Types and sizes
Types and sizes can be specified in the following figures and tables. 3 Marking Marking example: Marking of the clamping screw of M6, L=22mm, L=12mm: M6×22×12 JB/9162.15—1999 Approved by the State Machinery Industry Bureau on 1999-5-20 JB/T9162.15-1999 Implementation on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
National Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of ChinabzxZ.net
Clamping screws
Clampingscrew
Dimentinns
This standard specifies the types and sizes of clamping screws. Types and sizes
Types and sizes can be specified in the following figures and tables. 3 Marking Marking example: Marking of the clamping screw of M6, L=22mm, L=12mm: M6×22×12 JB/9162.15—1999 Approved by the State Machinery Industry Bureau on 1999-5-20 JB/T9162.15-1999 Implementation on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 2916-1997 Plastics--Vinyl chloride homopolymer and copolymer resins--Sieve analysis using an air jet sieving device
- GB/T 8608-1988 Low-gluten wheat flour
- GB/T 4767-1984 Codes for state of health
- GB/T 8381-1987 Determination of aflatoxin B1 in feed
- GB/T 15293-1994 Thyristor test method Turn-off thyristor
- JB/T 2001.35-1999 Water system check valve (PN=20MPa)
- GB/T 14584-1993 Sampling and determination of iodine-131 in air
- YY 0465-2003 Disposable hollow fiber plasma separator
- SY/T 0538-1994 Technical requirements for tubular heating furnaces
- GB/T 50266-1999 Engineering rock mass test method standard
- JB/T 8356.2-1996 Machine tool packaging box
- JB/T 9064-1999 Coil pressure test and sealing inspection
- JB/T 4747-2002 Technical conditions for ordering steel welding rods for pressure vessels
- GB/T 27402-2008 Criterion on quality control of laboratories - Plant quarantine
- SY/T 5288-2000 Main connection dimensions of drilling and lifting equipment
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com