GB/T 5915-1993 Formula feeds for piglets and growing and finishing pigs

This standard specifies the quality indicators and grading standards for piglet and growing-finishing pig compound feeds. This standard applies to piglet and growing-finishing pig compound feeds that are processed, sold, allocated and exported. GB/T 5915-1993 Piglet and growing-finishing pig compound feeds GB/T5915-1993 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Formula feed for starter and finisher swine1Subject content and scope of application
This standard specifies the quality indicators and grading standards of formula feed for starter and finisher swine. This standard is applicable to formula feed for starter and finisher swine that is processed, sold, allocated and exported. 2 Reference standards
GB5917
Method for determination of particle size of compound feed
GB5918
GB6432
Method for determination of mixing uniformity of compound feedMethod for determination of crude protein in feed
Method for determination of crude fat in feed
GB6433
GB6434
Method for determination of crude fiber in feed
GB6435
Method for determination of moisture in feed
GB/T 6436
GB/T 6437
GB/T 6438
GB/T 6439
Determination method of calcium in feed
Determination method of total phosphorus in feed
Determination method of crude ash in feed
Determination method of water-soluble chloride in feed
Feed label
GB 10648
General provisions for determination method of nutrient composition in feed
3 Technical requirements
3.1 Sensory index
Uniform color, no fermentation, mildew, caking, odor, or foreign film. 3.2 Moisture
3.2.1 North: not higher than 14.0%.
3.2.2 South: not higher than 12.5%.
When one of the following conditions is met, the moisture content may be increased by 0.5%. Seasons with an average temperature below 10°C;
No more than 10 days from the factory to the feeding period;
The specified amount of mildew inhibitor is added to the compound feed (indicated on the label). 3.3 Processing quality indicators
3.3.1 Finished product particle size (powder)
GB/T 5915--93
Replaces GB591593
99% passes through a 2.80mm woven sieve, but no whole grains are allowed, and the amount of material on a 1.40mm woven sieve shall not exceed 15%. 3.3.2 Mixing uniformity
Approved by the State Administration of Technical Supervision on February 16, 1993, and implemented on July 1, 1993
GB/T 5915-93
The compound feed should be mixed evenly, and its coefficient of variation (CV) should not be greater than 10%. 3.4 The nutritional components are shown in the following table:
Product name
Piglet feed
Growing and finishing pigs
Product name
Piglet feed
Growing and finishing pigs
Crude fat, %
not less than
Calcium, %
0.70~1.20
0.50~1.00
0.40~~0.80
0.40~0.80
Crude protein, %
not less than
Phosphorus, %
not less than
Note: The content of each nutritional component index is calculated on the basis of 87.5% dry matter. 3.5 Hygiene index
Salt, %
0.30~~0.80
Crude fiber, %
Not higher than
Crude ash, %bzxZ.net
Not higher than
Digestible energy not lower than
-kcal/kg
0.30~0.80
0. 30~0, 80
0.30~0.80
3.5.1 It shall be implemented in accordance with the provisions of the relevant feed hygiene standards of the People's Republic of China. 3.5.2 It shall comply with the provisions of the relevant feed additives of the People's Republic of China. Test method
4.1 Sample and its preparation: temporarily implemented in accordance with the provisions of LS81.1. 4.2 Inspection method
4.2.1 Moisture: implemented in accordance with GB6435.
4.2.2 Finished product particle size: in accordance with GB5917. 4.2.3 Mixing uniformity: in accordance with GB5918. Crude protein: in accordance with GB6432.
4.2.5 Crude fiber: in accordance with GB6434.
4.2.6 Crude ash: in accordance with GB6438.
4.2.7 Calcium: in accordance with GB6436.
4.2.8 Phosphorus: in accordance with GB6437.
4.2.9 Salt: in accordance with GB6439.
4.2.10 Digestible energy: temporarily calculated by looking up the table values ​​of the raw materials that make up the formula (China Feed Composition and Nutritional Value Table, China Feed Database Latest Edition, retrieve when necessary).
4.3 The relative deviation of the test values ​​shall be in accordance with the provisions of GB6432~6439 and GB5917. 4.4 When monitoring and arbitration determine whether each indicator is qualified or not, the analytical tolerance must be considered. Before the general standard for analytical tolerance in my country is announced, the recommended values ​​in the appendix can be temporarily implemented. 8
5 Inspection rules
GB/T 5915-93
5.1 Sensory index, finished product particle size, moisture content, and crude protein are factory inspection items (delivery inspection items), which are inspected by the manufacturer or the company's quality inspection department. The rest are type inspection items (routine inspection items). 5.2 Under the premise of ensuring product quality, the manufacturer can determine the batch of factory inspection according to the changes in process, equipment, formula raw materials, etc.
6 Determination rules
6.1 Sensory index, moisture content, mixing uniformity, crude protein, crude ash, crude fiber, calcium, phosphorus, etc. are qualified indicators. If one of the indicators does not meet the standard during the inspection, re-sampling should be carried out for re-inspection. If one of the re-inspection results is unqualified, it will be judged as unqualified. 6.2 Digestible energy, crude fat, salt, and finished product particle size are reference indicators. If necessary, they can be tested or accepted according to this standard. 7 Labeling, packaging, transportation, and storage
7.1 Labeling: It should comply with the requirements of GB10648. For feeds with drug additives, the drug name and content should be indicated on the label. 7.2 Packaging, transportation, and storage
The packaging, transportation, and storage of compound feeds must comply with the requirements of quality assurance, quantity assurance, transportation safety, and classification and graded storage to prevent contamination. 39
Measurement Items
Crude fat
Crude protein
Crude fiber
Crude ash
Additional Notes:
GB/T5915-93
Appendix A
Permissible analysis error of various nutrients
(Supplement)
Standard value
(≤13.0)
0.40~0.80
0.50~1.00
0.70~1.20
0.30~~0.80
This standard is proposed by the Ministry of Commerce and the Ministry of Agriculture, Animal Husbandry and Fisheries of the People's Republic of China. Analysis allowable error
Absolute error, %
Limits for judging compliance or acceptance
(≤13. 4)
(≤14. 9)
0. 30~0. 90
0.38~1.12
0.56~1.34
This standard was drafted by the Feed Industry Office of the Ministry of Commerce, Wuxi Institute of Light Industry, and the Animal Husbandry Research Institute of the Beijing Academy of Agricultural Sciences. The main drafters of this standard are Liu Danghui, Zou Yun, Zeng Zhaoguang, and Zhu Jianping. 310
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.