GB 12624-1990 General technical requirements for labor protection gloves
time:
2024-08-09 00:12:50
- GB 12624-1990
- Abolished
Standard ID:
GB 12624-1990
Standard Name:
General technical requirements for labor protection gloves
Chinese Name:
劳动防护手套通用技术条件
Standard category:
National Standard (GB)
-
Date of Release:
1990-01-02 -
Date of Implementation:
1991-10-01 -
Date of Expiration:
2006-09-01
Standard ICS number:
Environmental protection, health care and safety>>Protective equipment>>13.340.10 Protective clothingChina Standard Classification Number:
Medicine, Health, Labor Protection>>Labor Safety Technology>>C73 Labor Protection Products
alternative situation:
Replaced by GB/T 12624-2006
Review date:
2004-10-14Drafting Organization:
Shanghai Labor Protection Research InstituteFocal point Organization:
National Technical Committee for Standardization of Labor Protection ProductsPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
State Administration of Work Safety
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the classification and marking, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of labor protection gloves. This standard is applicable to various gloves widely used in industry and agriculture. GB 12624-1990 General Technical Requirements for Labor Protection Gloves GB12624-1990 Standard Download Decompression Password: www.bzxz.net
- Recommended standards
- JB/T 8364.5-1996 60° tapered pipe thread rolling wheel
- GB/T 8413-1996 CZY type marine self-priming centrifugal water pump
- QB/T 1745-1993 自来水笔用墨水
- JB/T 10207-2000 Rake vacuum dryer
- HG/T 2591-1994 Resistant Salt S
- GB 7036.1-1997 Pneumatic tire inner tubes Part 1: Automobile tire inner tubes
- GBZ 54-2002 Diagnostic criteria for occupational chemical eye burns
- GB 15743-1995 Passenger car side door strength
- GB 8944.1-1988 Determination of bulk sales quality of pulp Part 1: Pulp board and pulp bale
- QB/T 1622.10-1992 Stainless steel utensil basin
- JB/T 9843-1999 Electromagnetic ammeter for tractors and internal combustion engines
- SY/T 5587.15-1993 Specification for drilling cement plugs for routine well repair in oil and water wells
- JB/T 9930.4-1999 Technical requirements for vertical band sawing machines
- GB/T 5616-1985 Guidelines for the application of conventional non-destructive testing
- SY/T 0413-2002 Technical standard of polyethene coating for buried steel pipeline
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com