
GB 16208-1996 Hygienic standard for polyethylene in workshop air
time:
2024-08-06 06:42:12
- GB 16208-1996
- in force
Standard ID:
GB 16208-1996
Standard Name:
Hygienic standard for polyethylene in workshop air
Chinese Name:
车间空气中聚乙烯卫生标准
Standard category:
National Standard (GB)
-
Date of Release:
1996-04-03 -
Date of Implementation:
1996-09-01
Standard ICS number:
Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplaceChina Standard Classification Number:
Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
Release date:
1996-04-03Review date:
2004-10-14Drafting Organization:
Liaoning Provincial Institute of Labor HygieneFocal point Organization:
Ministry of HealthPublishing Department:
State Administration of Technical Supervision Ministry of Health of the People's Republic of ChinaCompetent Authority:
Ministry of Health

Skip to download
Summary:
This standard specifies the maximum permissible concentration of polyethylene in the air of a workshop and the monitoring and inspection methods. This standard applies to enterprises that produce and use polyethylene. GB 16208-1996 Hygienic Standard for Polyethylene in Workshop Air GB16208-1996 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of China
Health standard for polyethylene in the air of workplace
Health standard for polyethylene in the air of workplace1 Subject content and scope of application
This standard specifies the maximum allowable concentration of polyethylene in the air of workplace and the monitoring and inspection methods. This standard applies to enterprises that produce and use polyethylene. 2 Referenced standards
GB 5748
3 Hygiene requirements
Determination method of dust in workplace air
The maximum allowable concentration of polyethylene in workplace air is 10mg/m2. 4 Monitoring and inspection methodsbzxZ.net
The determination of polyethylene concentration in workplace air shall be carried out in accordance with GB5748. 5 Supervision and implementation
Health supervision agencies at all levels are responsible for the implementation of this standard. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the Liaoning Provincial Institute of Labor Hygiene. The main drafters of this standard are Xiao Xingyuan, Fang Yuxiang, Yong Ailun and Liu Zhanyuan. GB 162081996
This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, which is entrusted by the Ministry of Health. Approved by the State Administration of Technical Supervision on April 3, 1996 and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Health standard for polyethylene in the air of workplace
Health standard for polyethylene in the air of workplace1 Subject content and scope of application
This standard specifies the maximum allowable concentration of polyethylene in the air of workplace and the monitoring and inspection methods. This standard applies to enterprises that produce and use polyethylene. 2 Referenced standards
GB 5748
3 Hygiene requirements
Determination method of dust in workplace air
The maximum allowable concentration of polyethylene in workplace air is 10mg/m2. 4 Monitoring and inspection methodsbzxZ.net
The determination of polyethylene concentration in workplace air shall be carried out in accordance with GB5748. 5 Supervision and implementation
Health supervision agencies at all levels are responsible for the implementation of this standard. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the Liaoning Provincial Institute of Labor Hygiene. The main drafters of this standard are Xiao Xingyuan, Fang Yuxiang, Yong Ailun and Liu Zhanyuan. GB 162081996
This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, which is entrusted by the Ministry of Health. Approved by the State Administration of Technical Supervision on April 3, 1996 and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 3290.2-1999 Vertical single-axis mortise and tenon machine accuracy
- JB/T 7035.2-1993 Types and dimensions of hydraulic bladder accumulators Type AB
- JB/T 3411.123-1999 Dimensions of quick-change end milling cutter bars
- GB 1260-1990 Working reference reagent (volume) Zinc oxide
- GB/T 11594-1989 Definition table of interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) on public data networks
- GB/T 13413-1992 General terminology for ships Ship systems
- JB/T 5000.13-1998 General technical conditions for heavy machinery packaging
- JB/T 6226-1992 Technical requirements for motors for fans of large thermal power equipment
- HG 3616-1999 Bacillus thuringiensis powder
- GB/T 33671-2017 Meiyu monitoring indices
- JB/T 8343-1996 Technical requirements for horizontal woodworking band saws
- JB/T 3753-1999 Dimensions of spindle end for 3:20 taper hole of jig boring machine
- HG/T 2594-1994 Various colors of amino baking enamel
- JB/T 6764-1993 Technical requirements for general purpose industrial steam turbines
- JB/T 9071-1999 TIG welding procedure and welding procedure qualification for aluminum air separation equipment
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]