GB 4133-1984 Types and dimensions of forced transmission of Morse cones

This standard is applicable to forced transmission Morse internal cone and Morse external cone. This standard is equivalent to ISO 5413-1976 (E) "Machine tools - Forced transmission of Morse cone". GB 4133-1984 Forced transmission type and size of Morse cone GB4133-1984 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
The type and dimenslons for positive drive of Morse tapersThis standard applies to the following types of transmission: Morse inner taper and Morse outer taperThis standard is equivalent to IS054131976 (E) "Machine tools - Morse chain positive drive"Structural type and size:
Morse chain
Morse pressureWww.bzxZ.net
Marking example:
No. 5 positive drive Morse taper:
Morse taper No. 5GB4133-84
Published by the National Bureau of Standards on January 18, 1984
UDC621.9:621.
88-181
GB 4133-84
ISO5413-1976
1984-10-01 implementation
Additional remarks:
GB 4133-84
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of Chongqing Cylindrical Gear Machine Tool Research Institute. Chongqing Cylindrical Gear Machine Tool Research Institute is responsible for drafting this standard. The nominal size of the cutter is the maximum temporary filling of the tube, and only the outer side is allowed.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.