JB/T 2732.3-1999 Parameters of cantilever planers and gantry planers

JB/T 2732.3-1999 This standard is a revision of ZB J57 011-89 "Parameters of cantilever planers and gantry planers". During the revision, only the editorial modifications were made according to the relevant regulations, and the main technical content was not changed. This standard is part of the JB/T 2732 series of standards, which includes the following four parts: JB/T 2723.1-1994 Accuracy of cantilever planers and gantry planers JB/T 2723.2-1994 Technical conditions of cantilever planers and gantry planers JB/T 2732.3-1999 Parameters of cantilever planers and gantry planers JB/T 2723.4-1999 Model spectrum of cantilever planers and gantry planers This standard specifies the main parameters of cantilever planers and gantry planers. This standard applies to newly designed cantilever planers and gantry planers for general purposes. This standard was first issued in March 1975 and revised for the first time in March 1989. JB/T 2732.3-1999 Parameters of cantilever planers and gantry planers JB/T2732.3-1999 Standard download decompression password: www.bzxz.net

ICS25.080.25
Machinery Industry Standard of the People's Republic of China
JB/T2732.3—1999
Cantilever Planer and Double Column Planer
Published on 1999-05-20
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T27323—1999
This standard is revised on the basis of ZBJ5701189 "Parameters of Cantilever Planer and Double Column Planer". The technical content of this standard is consistent with that of ZBJ57011-89, and it has only been re-edited according to relevant regulations. This standard is part of the JB/T2732 "Cantilever Planer and Double Column Planer" series of standards. This series of standards includes the following four parts: JB/T2732.1—1994
Precision of cantilever planers and gantry planers
4 Cantilever planers and gantry planers
JB/T 2732.2—1994
Technical conditions
JB/T 2732.3—1999
Cantilever planers and gantry planers
Series of models
JB/T2732.41999
Cantilever planers and gantry planers
This standard replaces ZBJ57011—89 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the Heavy Machine Tool Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The responsible drafting unit of this standard is Dongfang Machine Tool Factory. The drafting units of this standard include: Wuhan Heavy Machine Tool Plant, Jinan Second Machine Tool Group Co., Ltd., and Taiyuan First Machine Tool Plant. This standard was first issued in March 1975 and revised for the first time in March 1989. 1
1 Scope
Machinery Industry Standard of the People's Republic of China
Cantilever Planer and Gantry Planer
This standard specifies the main parameters of cantilever planer and gantry planer. This standard applies to newly designed general-purpose cantilever planer and gantry planer. 2 Parameters
JB/T2732.3—1999
Replaces ZBJ57011-89
The types of cantilever planer and gantry planer are shown in Figures 1 and 2. The parameters of the machine tools shall comply with the provisions of Table 1. Figure 1 Cantilever planer
Figure 2 Gantry planer
Approved by the State Machinery Industry Bureau on May 20, 1999 and implemented on January 1, 2000
Maximum cutting
width B
Cantilever planerwwW.bzxz.Net
Gantry planer
Maximum cutting height H
Maximum cutting length L
Note: The maximum cutting length L is allowed to increase:
B-800-1600mm, in increments of 1000mm: B=2000-5000mm, in increments of 2000mm. 2
JB/T2732.3-1999
Mechanical Industry Standard
Cantilever Planer and Gantry Planer
JB/T27323—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Word Count 6.000
Format 880×1230
First Printing in June 1999
First Edition in June 1999
Print Quantity 1-500
Price 500 Yuan
99-240
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.